• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.87-92
• /
• 2008

This study presents the design methods that will enable high speed communication companies to establish high efficiency optical communication network at a low cost. This study compares and analyzes CWDM and DWDM technology that transmit multiple optical signals through an optic core, and describes compensation of deteriorated optical signal, which occurs in long distance data transmission, through the stabilization of TX/RX terminal to enable long distance data transmission. CWDM based line access multiplexer increases concentration efficiency by eight times by providing 4:1 concentration subscriber network.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.491-497
• /
• 2003

In this paper, an optical encryption system using binary key code based on the joint transform correlator (JTC) is considered. The binary key code is synthesized by using a design technique of the pixel-oriented Computer Generated Holograms (CGHs). The independence and efficiency of the binary encryption key are investigated through computer simulation. To test the efficiency of the encryption system using binary key code, a holographic encryption system is constructed, and the experimental results prove that our holographic encryption system has high ability.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.17-22
• /
• 2003

We experimentally measured the dependence of FWM efficiency on channel spacing for G.652, G.653, G.655 optical fiber with various dispersion values and compared the results with analytical results. Also, we investigated the dependence of XPM efficiency on channel spacing and dispersion in pump-probe experimental configuration.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.522-530
• /
• 2019

We present simulation methods to accurately determine the transmission efficiency and far-field patterns (FFPs) of a shallow-etched waveguide grating antenna (WGA) formed on a silicon-on-insulator wafer based on the finite-difference time-domain (FDTD) approach. The directionality and the FFP of a WGA with >1-mm in length can be obtained reliably by simulating a truncated WGA structure using a three-dimensional FDTD method and a full-scale WGA using a two-dimensional FDTD with the effective index method. The developed FDTD methods are applied to the simulation of an optical phased array (OPA) composed of a uniformly spaced WGA array, and the steering-angle dependent transmission efficiency and FFPs are obtained in OPA structures having up to 128-channel WGAs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.880-882
• /
• 2002

We have proposed a novel optical design technique of light-guide plates(LGPs) which can able to improve the optical efficiency of transflective LCDs. The basic concepts of our design technique are that we make the groove-pattern of LGP pixels resemble the pixel-array-pattern of transflective LCDs in shape and size and make the surface of the groove scatter (front scattering). In simulated and measured results, we ensure that our design of LGP in backlight unit for transflective LCDs can improve the optical efficiency of LCDs.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.55-60
• /
• 2014

Laser projector has many advantages of high brightness, high resolution and small size, but the huge drawback of image degradation called speckle which generated by coherence of laser and roughness of surface interrupts their general use. There are many methods to reduce speckle pattern, but they need effective optical systems to realize display to the far field with huge volume. We designed speckle reduction element by using microlens with controlled curvature to reduce spatial coherence. Vibration element was also applied to reduce temporal coherence which considered response time of eye. Designed element was fabricated by simple reflow method and imprinting method. From the results, the fabricated element performed 48.33% of speckle reduction efficiency and 41.29% of optical efficiency with a single doublet lens.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.108-109
• /
• 2002

Optical tweezers는 광압(radiation pressure)을 사용하여 입자들을 포획하거나 조절할 수 있다는 점에서 마이크로스케일의 유전체구뿐만 아니라 세포에서도 널리 사용되고 있다. 일반적으로 빛이라는 것은 광자들의 집합체로서 광자의 입자성으로 인하여 외부의 물체와 충돌시 운동량을 전달하게 되고 이것을 광압(radiation pressure)이라고 하며 optical tweezers [1]는 이 광압을 이용한 방법중 하나이다. 레이저빔을 입자에 집속 시켜 주게 되면 입자는 광압에 의해서 gradient force와 scattering force의 힘을 받게 된다. (중략)

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.