• 한국광학회지
• /
• 제15권1호
• /
• pp.28-33
• /
• 2004

상부 도파로와 중간 결합층이 적층된 단일모드 광섬유를 기본구조로 하는 측면 연마 광섬유 결합기를 상호 광 결합이 일어나는 영역을 다층막 도파로로 등가화하여 결합 효율을 해석하였다. 다층막 구조에서 중간 결합층의 유무에 따른 반사도를 계산하여 상부 도파로의 굴절률의 함수로 도시하였고, 상부 도파로의 굴절률이 광섬유 코어의 굴절률보다 클 경우 중간 결합층의 조건에 의해서 광 결합이 증가되어짐을 보였다. 리튬나오베이트를 상부 도파로로 가지는 결합기의 실험결과를 톤해 이론적 해석의 타당함을 보였고 계산 결과와 일치함을 보였다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.147-151
• /
• 2004

In this study, an optical fiber assembly directly coupled with a laser diode or a photo diode is designed to confirm high reliable optical coupling efficiency of optical transmitter(Tx) and receiver(Rx). The optical fiber assembly is fabricated by soldering an optical fiber and a Kovar ferrule using a glass solder after inserting an optical fiber through a Kovar ferrule. The Kovar which has good welding characteristics is applied to introduce laser welding technique. The glass solder has excellent thermal characteristics such as thermal shift delamination compared with PbSn, AuSn solder previously used usually. Furthermore, the glass solder doesn't need fiber metalization and this enables low cost fabrication. However, the glass soldering is high temperature process over 35$0^{\circ}C$ and the convex shape after solidification due to surface tension causes the stress concentration on optical fiber. The stress concentration on the optical fiber increases the optical insertion loss and possibility of crack formation. The shape of glass solder was designed referring to 2-D Axi-symmetric FEM simulation. To test the mechanical reliability, mechanical vibration test and shock test were done according to Telcorida GR-468-Core protocol. After each test, the optical loss of the stress distributed fiber assembly didn't exceed 0.5 dB, which passes the test.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.124-125
• /
• 2000

We introduce a scheme with a maximized efficiency of detecting atoms passing through an optical standing-wave mode cavity. Consider a standing-wave optical cavity illuminated by a weak probe beam through one of its mirrors where the transmission through the other mirror is monitored by a photodetector. If an atom is put in the cavity, the atom-cavity coupling shifts the resonance frequency of the system via the so-called normal mode splitting, and thereby the transmission power will drop. In fact, this type of atom detection scheme has been used in recent single atom trap experiments In practice, however, the field in a standing-wave mode will have a geometrical structure having nodes and antinodes that when the atom traverses the cavity through one of the nodes, there will be no such effect of atom-field interaction. (omitted)

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.228-233
• /
• 2000

본 논문에서는 무선광연결에서 끈사적 평균잡음검출을 이용한 차동검출방식에 대하여 소개한다 이 방식은 기존의 잠음광의 영향을 소거하는 차동검출기의 기능을 보완한다. 근사적 평균잡음전압을 이용하여 차동검출하면. 물체나 사람의 이동에 의하여 나타날 수 있는 잡음광 결합비의 순간적 변화에 의한 출력전압의 변동을 줄일 수 있다 이 것은 장음광의 공간적 분포가 수시로 변동하는 환경에서 무선광연결을 구성하는 경우 잡음광을 소거하는 데에 매우 효과적이다

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.14-15
• /
• 2003

Polymer optical fibers (POFs) are being considered as important high-speed communication media in the area of local area networks, datalinks and optical sensors. Large core diameter (500～1000 $\mu$m) and large numerical aperture (0.2~0.9) in a POF allow easy processing and connectorization, low cost high efficiency of beam coupling from LDs or LEDs, and complete immunity to EMI／EMR. There are many reports about 2.5 Gbps transmission the polymethylmethacrylate (PMMA) graded index (GI) POF over a distance of 100 m. (omitted)

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.732-738
• /
• 2014

Combined optical simulation of the ray-tracing technique and the finite difference time domain method was used to investigate the effect of the emitter orientation and the photonic crystal layer on the outcoupling efficiency (OCE) of bottom-emission type organic light emitting diodes (OLEDs). The OLED with a horizontal emitter exhibited an opposite interference effect to that of one with a vertical emitter, which suggested that the OCE would be very sensitive to the emitter orientation at a fixed emitter-cathode distance. The OLED with a horizontal emitter exhibited much larger OCE than that with a vertical emitter did, which was due to the substantial difference in the radiation pattern along with the different coupling with the surface plasmon excitation. The OCE with a horizontal emitter was increased by approximately 1.3 times by inserting a photonic crystal layer between the indium tin oxide layer and the glass substrate. The present study suggested that appropriate control of the emitter orientation and its combination to other outcoupling structures could be used to enhance the OCE of OLEDs substantially.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.235-243
• /
• 2002

황섬유의 최저손실 파장영역인 $1.55\mu\textrm{m}$에서 고출력으로 안정하게 농작하는 광센서용 광원인 반도체 레이저를 제작하기 위하여 이론적인 해석을 수행한 후 제작하였다. 활성영역과 SCH층의 재료는 $Ln_{1-x}Ga_xAs_yP_{1-y}$를 사용하였다. 광센서용 광원으로 사용되기 위해서는 넓은 스펙트럼 폭을 가지며, 가간섭 길이가 짧은 특성을 가지는 조건을 만족해야 한다. 따라서, 반도체 레이저에서 레이징을 억제시켜 줌으로써 넓은 스펙트럼 폭을 가지도록 설계를 하였고, 광섬유와 결합효율을 높일 수 있도록 tapered 형태의 스트라입 구조를 채택하여 마스크 패턴을 형성하였다. 또한, 레이징을 억제하기 위하여 후면에 윈도우 영역을 두었고, 측방향으로 경사각을 두어 반사도를 낮추도록 설계 및 제작하였다. 7도와 15도의 측면 경사각을 가지는 구조와 굽은 스트라입 구조를 가지는 소자를 제작하여 특성을 측정한 결과, 광센서용 광원으로서 적용이 가능한 광출력 특성과 넓은 스펙트럼 폭을 가졌다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.63-67
• /
• 2013

We perform an optical vestigial sideband (VSB) filtering using a pair of Fabry-Perot (FP) filters. The transmittance curve of each FP filter is made to have sharp skirts using an offset between input and output coupling fibers. Moreover, the accurate periodicity of FP filters in the optical frequency domain enables the simultaneous VSB filtering of a large number of optical channels. With this VSB filtering technique, we transmit 12.5-GHz spaced $64{\times}12.4-Gb/s$ wavelength-division-multiplexing channels over a single-mode fiber up to 150 km without any dispersion compensations. When the channel spacing is reduced to 10 GHz, we achieve the spectral efficiency of 1 bit/s/Hz in conventional optical intensity modulation systems up to 125 km.

• ETRI Journal
• /
• 제17권2호
• /
• pp.1-10
• /
• 1995

We propose a novel planar optical interconnection scheme for 100 Gb/s optical packet address detection, which consists of waveguide grating couplers and a diffractive microlens integrated on a glass substrate 3-dimensionally. Length and duty cycle of the grating couplers have been determined on the bases of the ray-optic propagation-mode analysis in a slab waveguide and of the rigorous coupled-wave diffraction analysis for out-coupled radiation-modes. The 3-dimensionally integrated planar optics makes it possible to connect each address bit-signals of $TE_ 0-waveguide$ mode to the detector with a power uniformity of 6.4 % and a total coupling efficiency of 72.3 %.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.6-12
• /
• 2004

Diffraction Bragg gratings consisting of metal (silver) nanoparticles are generated inside a soda-lime glass substrate. After ion-exchanging and annealing processes in the glass, the silver nanoparticles are first formed with the particle diameters of 10 nm ∼ 30 nm. By interfering two CW laser beams at ∼ 60 ${\mu}{\textrm}{m}$ deep under the surface of the nanoparticles-dispersed glass, Bragg gratings with thickness of 15 ${\mu}{\textrm}{m}$ and period of 3.5 ${\mu}{\textrm}{m}$ are generated. Diffraction efficiency of the gratings formed by two TE-polarized beams is three times higher than that by two TM-polarized beams. From this polarization dependence, we have found that strong coupling of the surface plasmons induced on the metal particles may contribute dominantly to generate the diffraction grating.