• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.26-31
• /
• 1989

Optical working machines are developed. the machines are to be used in the preparation of Nd-phosphate glass amplifier rod and elliptical disk amplifier plate of the high power Nd-YLF-phosphate glass laser amplifier system. In this report, the working principles of the machines are presented, and several results are shown by photographes, design drawing and the disks actually fabricated by using the machines.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.326-332
• /
• 1994

Performance of soliton based long-haul optical communication system with in-line optical amplifier repeaters are evaluated numerically. To reduce the optical amplifier noise, the amplifier gain is increased and the post amplifier loss is included. By theoretical calculation with 1480 nm co propagating pump, 7 dB amplifier gain and operating the amplifier 1 dB in compression, the spontaneous emission factor can be reduced from 2.37 to 1.45 by increasing the pump power from 3.71 to 11.53 mW and increasing the post amplifier loss from 0 to 10 dB. Then, power penalty can be reduced from 4.09 to 1.20 dB for 8,000'km transmission and the maximum transmission distance is 14,890 km. ,890 km.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.84-87
• /
• 2002

By using SOA (Semiconductor Optical Amplifier), all-optical XOR gate has been demonstrated at 5 Gb/s in RZ format. Firstly, Boolean AB-and Boolean AB have been obtained. Then, Boolean AB and Boolean AB have been combined to achieve the all-optical XOR gate, which has Boolean logic of AB+AB.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.222-227
• /
• 2015

We propose a new and potentially integrable scheme for the realization of an all-optical binary full adder employing two XOR gates, two AND gates, and one OR gate. The XOR gate is realized using a Mach-Zehnder interferometer (MZI) based on a semiconductor optical amplifier (SOA). The AND and OR gates are based on the nonlinear properties of a semiconductor optical amplifier. The proposed scheme is driven by two input data streams and a carry bit from the previous less-significant bit order position. In our proposed design, we achieve extinction ratios for Sum and Carry output signals of 10 dB and 12 dB respectively. Successful operation of the system is demonstrated at 10 Gb/s with return-to-zero modulated signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.568-574
• /
• 2009

320km optical transmission link for 128 channel DWDM (dense wavelength-division-multiplexing) signals is simulated and fabricated. An optical fiber amplifier for the link is composed of a distributed Raman amplifier and dual C/L-band EDFAs which are optimized for the performances of an optical amplifier obtained from the simulation. Gain and NF of the optimized EDFAs are above 19dB and below 7.5dB, respectively. The resultant OSNRs (optical signal to noise ratios) of the link are average 25dB on each band.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.9-10
• /
• 2006

We report the realization of the Yb/Tm co-doped silica glass optical fiber amplifier operating at 1470 nm upon 980 nm pumping. The energy transfer coefficient from Yb to Tm was estimated using the threshold condition of the optical amplifier.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2006

A novel all-optical gain-controlled (AOGC) bidirectional amplifier is proposed and demonstrated in a compact structure. The AOGC function using fiber Bragg grating (FBG) pairs controls both directional signals independently, and combinations of optical interleavers and isolators suppress Rayleigh backscattering (RB) noise. The amplifier achieves high and constant gain with a wide dynamic input signal range and low noise figure. The performance does not depend on the input signal conditions, whether static-state or transient signals, or whether there is symmetric or asymmetric data traffic on bidirectional transmission. Transmission comparison experiments between invariable symmetrical and random variable asymmetric bidirectional data traffic verify that the all-optical gain control and bidirectional amplification functions are successfully combined into this proposed amplifier.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.4-8
• /
• 2011

We have evaluated the performances of bidirectional optical amplifiers which were suited for the cost-effective implementation of amplified bidirectional passive optical networks (PONs). First, we measured the maximum gains of two simple bidirectional optical amplifiers implemented without using any optical components for the suppression of reflected signals. From the results, the maximum gains of two simple bidirectional amplifiers with a broadband light source (BLS) seeded optical source were limited to be 27 dB due to the reflection-induced in-band crosstalk, when the reflectance coefficients were measured to be -33 dB in both directions. Then, we have also implemented a bidirectional optical amplifier with two band splitters for the amplified bidirectional PON where the two different wavelength bands were allocated to the downstream and upstream signals transmission. In our measurement, we confirmed that the maximum gain of bidirectional optical amplifier with two band splitters could be increased to more than 30 dB owing to the efficient suppression of in-band crosstalk.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.81-96
• /
• 2002

This paper describes our design of a hybrid amplifier composed of a distributed Raman amplifier and erbium-doped fiber amplifiers for C- and L-bands. We characterize the distributed Raman amplifier by numerical simulation based on the experimentally measured Raman gain coefficient of an ordinary single mode fiber transmission line. In single channel amplification, the crosstalk caused by double Rayleigh scattering was independent of signal input power and simply given as a function of the Raman gain. The double Rayleigh scattering induced power penalty was less than 0.1 dB after 1000 km if the on-off Raman gain was below 21 dB. For multiple channel amplification, using commercially available pump laser diodes and fiber components, we determined and optimized the conditions of three-wavelength Raman pumping for an amplification bandwidth of 32 nm for C-band and 34 nm for L-band. After analyzing the conventional erbium-doped fiber amplifier analysis in C-band, we estimated the performance of the hybrid amplifier for long haul optical transmission. Compared with erbium-doped fiber amplifiers, the optical signal-to-noise ratio was calculated to be higher by more than 3 dB in the optical link using the designed hybrid amplifier.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.5-9
• /
• 2016

The modulation bandwidth of a reflective semiconductor optical amplifier (RSOA) is limited by carrier lifetime. Therefore, it is hard to directly modulate an RSOA with high-speed electrical signals. We theorize that an optical filter can act as an optical equalizer, compensating for the narrow bandwidth limitation imposed by the RSOA. By modeling a time-varying RSOA with a modified transfer matrix method (TMM), we simulated 25 Gbps operation of an RSOA with optical filtering effects. We investigated the impact of detuning the center wavelength of the optical filter on the modulation of an RSOA. The numerical results show that it is possible to modulate an RSOA with an optical filtering effect at 25 Gbps without electronic equalization or digital signal processing.