• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1924-1926
• /
• 2002

The optical current transformer using Faraday effect is the sensor to measure current that flows in any conductor. This sensor doesn't undergo the magnetic saturation and effect of adjacent conductors. But this senor using bulk-glass sensing clement has crucial drawback. It is impossible that the sensor is mounted to conductor without breaking the closed-loop of light or conductor. So we developed the clamp-type optical current transformer and made an experiment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.223-232
• /
• 2000

Optical fibre sensors have shown a potential to serve real time health monitoring of the structures. They can be easily embedded or attached to the structures and are not affected by the electro-magnetic field. Furthermore, they have the flexibility of the sensor size and very highly sensitive. In this study, we conducted several laboratory and field tests using a novel optical sensor based on Brillouin scattering. One of the advantages of this technique is that the bare fibre itself acts as sensing element without any special fibre processing or preparation. Test results have shown that BOTDR can be a great solution for sensor systems of Civil Engineering Smart Structures.

• 지구물리
• /
• 제7권4호
• /
• pp.269-276
• /
• 2004

광섬유 센서는 구조물의 실시간 건전도 모니터링의 가능성을 보여주고 있다. 구조물에 설치가 용이하고 전자기장에 영향을 받지 않는 장점이 있다. 더욱이 광섬유 센서는 센서크기의 융통성과 함께 매우 정밀한 특징을 보이고 있다. 본 연구에서는 부착된 bare fiber가 보호 피복을 가진 것에 비해 모재와의 일체성과 민감도(sensitivity)가 높은 것을 보여주고 있으며, 특히, 산란파를 이용한 광센서(BOTDR)의 경우, 여타의 다른 광섬유센서와는 달리 센싱 소자의 역할과 데이터 전송의 기능을 동시에 수행함으로써, 대형 토목구조물에 적합한 광섬유 센서로 그 유용성이 높은 것으로 판단된다.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.1007-1013
• /
• 2016

This paper presents the development of a magneto-optical encoder for higher precision and smaller size. In general, optical encoders can have very high precision based on the position information of the slate, while their sizes tend to be larger due to the presence of complex and large components, such as an optical module. In contrast, magnetic encoders have exactly the opposite characteristics, i.e., small size and low precision. In order to achieve encoder features encompassing the advantages of both optical and magnetic encoders, i.e., high precision and small size, we designed a magneto-optical encoder and developed a method to detect absolute position, by compensating for the error of the hall sensor using the linear table compensation method. The performance of the magneto-optical encoder was evaluated through an experimental testbed.

• 한국광학회지
• /
• 제34권2호
• /
• pp.72-75
• /
• 2023

본 논문에서는 500 A용 bus bar에 적용할 수 있는 광섬유 브래그 격자를 이용한 전류 센서를 제안하여 실험으로 구현하였다. Bus bar와 영구자석을 광섬유 격자로 연결하여 전류 인가 시, 연결된 두 소자 사이에서 발생하는 자기력에 의해 광섬유 브래그 격자의 브래그 파장이 변하게 된다. 실험 결과 500 A 직류 전류를 인가 시 브래그 파장은 650 pm의 변화를 보였다.

• 전자공학회논문지A
• /
• 제28A권9호
• /
• pp.721-728
• /
• 1991

In this paper, a magneto-optic modulator has been designed by using single crystal BSO and polycrystal ZnSe as Faraday cells. And practical core-type optical current sensors using pure iron and permalloy have been prepared and experimented. In order to obtain efficient magnetic field detection, LED(NEC OD08358, 0.87 $\mu$m) was used as optical source, PIN-PD(OD-8454)as optical receiver and multi-mode optical fiber (100/140$\mu$m) as transmission line. The characteristics matrix of the optical element was calculated by Stokes parameter, and optic modulation characteristics equations were derived by Muller matrix. Electromagnetic analysis program (FLUX 2D, micro VAX 3600) by finite element method was used to find the magnetic flux density around the core. The measuring error of the output voltage to input current has been masured below 5% in the range of 50A to 1000A. As the temperature was changed from -20$^{\circ}C$ to 60$^{\circ}C$, the maximum measurement error of the optical output has been found to be 0.5% at 60$^{\circ}C$. These experimental results show good temperature and linearity characteristics. The SNR of the overall system was 47dB in case of 600A (250.2 Oe) conductor current and the system has good noise immunity.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.266-272
• /
• 2014

This study proposes a closed-loop shaping control method with $H_{\infty}$ optimization for optical image stabilization (OIS) in mobile phone cameras. The image stabilizer is composed of a horizontal stage constrained by ball bearings and actuated by the magnetic force from voice coil motors. The displacement of the stage is measured by Hall effect sensors. From the OIS frequency response experiment, the transfer function models of the stage and Hall effect sensor were identified. The weight functions were determined considering the tracking performance, noise attenuation, and stability with considerable margins. The $H_{\infty}$ optimal controller was executed using closed-loop shaping and limiting the controller order, which should be less than 6 for real-time implementation. The control algorithm was verified experimentally and proved to operate as designed.

• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.395-400
• /
• 2008

비자성 및 자성 금속 시편의 표면 결함을 검출하기 위하여 교류자기장을 이용하였다. 비파괴 센서 프로브는 자성 박막 요크와 박막형 코일로 구성된 신호 검출부와 시편에 교류자기장을 인가하기 위한 단일 직선을 이용한 여기 코일로 이루어져 있다. 박막형 유도 코일 센서는 스퍼터, 전기도금, 건식 식각과 사진식각 공정을 이용하여 제작되었다. 시편에 교류자기장을 인가하기 위하여 0.7 MHz-1.8 MHz 주파수 영역에서 0.1A-1.0A의 교류전류를 여기코일에 인가하였다. 센서의 특성은 최소 0.5 mm의 깊이와 폭을 가진 인위적인 슬릿 형태 비자성체 Al과 자성체 FeC 결함 시편을 이용하여 측정하였다. 측정된 신호는 높은 감도를 갖고 결함 시편위의 슬릿결함의 위치와 일치함을 알 수 있었다. 또한 박막형 유도 코일 센서를 이용하여 마이크론 크기의 표면 결함을 가진 자성체 FeC의 시편을 비접촉 스캔하여 측정된 유도전압의 변화를 이미지화 하였으며 그 결과를 광학적 이미지와 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2461-2466
• /
• 2003

This paper presents a simple sensor fusion algorithm using neural network for navigation of mobile robots with obstacle avoidance and trap recovery. The multiple sensors input sensor data to the input layer of neural network activating the input nodes. The multiple sensors used include optical encoders, ultrasonic sensors, infrared sensors, a magnetic compass sensor, and GPS sensors. The proposed sensor fusion algorithm is combined with the VFH(Vector Field Histogram) algorithm for obstacle avoidance and AGPM(Adaptive Goal Perturbation Method) which sets adaptive virtual goals to escape trap situations. The experiment results show that the proposed low-level fusion algorithm is effective for real-time navigation of mobile robot.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.795-800
• /
• 2009

Surface plasmon resonance (SPR) has been widely used for biological and chemical sensing applications. The present study investigates numerically the optical characteristics for the single Au film and bimetallic Ag/Au film SPR configurations by using the multiple beam interference matrix (MBIM) method. We use the prism coupling method, especially Kretschmann configuration for excitation of surface plasmon wave (SPW). The estimated results of reflectance, phase shift and magnetic field intensity enhancement factor are provided for finding out the optimum configuration with high sensitivity for SPR measurement. As a result, the optimum thicknesses are found to be 52 nm for a single Au film and 5 nm to 36 nm for bimetallic Ag-Au film. From the comparison of full width half maximum (FWHM) values for reflectance, phase shift, and enhancement of magnetic field intensity, it is concluded that the highest sensitivity can be obtained when using the phase shift for SPR sensor.