• 정보화연구
• /
• 제9권1호
• /
• pp.111-120
• /
• 2012

최근 각국은 복잡하고 변화가 많은 안보 환경 하에서 국방 예산의 효율성과 작전의 효과성을 극대화하기 위해 능력기반 전력 건설 및 운용에 집중하고 있다. EA는 엔터프라이즈 범위의 구성요소를 정의하고 그들 간의 관계를 제시함으로서, 엔터프라이즈 범위의 관점을 통합하고, 변화와 복잡도등을 관리한다. 따라서 전장의 변화와 복잡도 관리를 위해서 EA를 구축하고, 국방 예산의 효율성과 작전 효과성을 증대를 위해서 능력중심의 우선순위 결정 및 자원의 대안수립이 중요하다. EA 사상아래 조직, 업무(작전), 기능, 통합능력, 체계, 자원, 전략 등 주요 엔터프라이즈 구성요소들을 통합능력을 중심으로 프레임워크내에 정의하여 복잡한 그들간의 연관관계를 함께 산출물로 제시하므로서 구성요소간의 정렬, 통합 및 상호운용성이 가능하게 하고, 현재의 전력운용 관점과 미래의 전력개발 관점을 동시에 포함하여 전환계획이 가능한 RTM기반 EA2I프레임워크를 이미 개념적 수준으로 제안한바 있다. 그러나 통합능력을 중심으로 보다 정량적이고 적용 가능하도록 EA2I프레임워크의 구성요소와 구성요소간의 관계, 특히 능력 및 능력우선순위 방법론을 구체적인 수학적 모델로 제시하여 보다 정량적이고 적용 가능하게 하였다.

• 대한전자공학회논문지SD
• /
• 제37권6호
• /
• pp.85-96
• /
• 2000

Fully Differential 연산 증폭기 회로는 SCF(Switched Capacitor Filter), D/A 컴버터, A/D 컨버터, 통신 회로 등의 VLSI 설계시 외부 부하 구동에 필수적이다. 기존의 CMOS 연산 증폭기 회로는 CMOS 기술에 따른 여러 가지 단점을 갖는데 우선 큰 부하 용량에 대한 구동 능력이 양호하지 못하고, 집적도의 증가에 따른 전원 전압의 감소로 인해 입출력 전압의 동작 특성이 저하되어 전체 회로의 동특성 법위가 감소된다. 이러한 단잠들을 개선하기 위하여 출력부의 출력 스윙을 늘릴 수 있는 차동 출력 구조를 사용한 회로가 Fully Differential 연산 증폭기 회로이며, 단일 출력 구조의 연산 증폭기 보다 스윙 폭이 향상된다. Fully Differential 연산 증폭기의 구성에서 전류 미러가 그 성능을 결정하며, 따라서 큰 출력 스윙과 안정된 회로 동작을 위해서는 출력 저항이 크고, 기준 전류와의 정합이 잘 되는 전류 미러의 설계가 중요하다. 본 논문에서는 큰 출력 저항과 기준 전류와의 정합 특성이 우수한 새로운 전류 미러를 제시하였다. 출력 스윙을 키우고 전력 소모를 줄이기 위해 새로운 전류 미러를 사용하여 2단 증폭 형태의 Fully Differential 연산 증폭기를 설계하였으며, 설계한 증폭기는 레이아웃으로 구현하여 시뮬레이션 프로그램(SPICE3f)을 통하여 성능을 검증하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.222-232
• /
• 2015

Purpose : The purpose of this study is to analyse affecting factors of Test and Evaluation and to improve the institution of Test and Evaluation in the Domestic purchase program. Methods : The domestic acquisition program is currently small in terms of size, but it is gradually increasing every year. Still, the domestic purchase program has insufficient regulations and procedures compared to the other procurement methods including research & development. Various problems are likely to occur between test and evaluation group, and defense industries regarding the regulations during Test & Evaluation. Therefore, the regulations and methods need to be amended to upgrade the current domestic purchase program into an effective and flawless one. In this paper, six variables have been chosen by the help of experts working in Ministry of National Defense (MND), Joint Chiefs of Staff (JCS), Army Headquarters and DAPA. Results : The six variables are effectiveness of proposal evaluation, fairness of test and evaluation, sufficiency of operational capabilities, seasonal period of test and evaluation, fulfillment in Integrated Logistics Support (ILS) of the industries, and guaranteeing appropriate environment for related enterprises' participation. Conclusion : This paper can help defense industries to enhance their development capabilities, and to perform tests more fairly and effectively considering the key factors identified in this research.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1597-1604
• /
• 2016

The speed at which the SRM (Switched Reluctance Motor) makes a transition from chopping control to single pulse operation. (i.e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on energy efficient C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• 유기물자원화
• /
• 제24권4호
• /
• pp.5-9
• /
• 2016

현대의 집적된 산업 사회에서 자정능력을 초과하여 발생하는 막대한 양의 유기성폐자원은 수질, 토양, 대기 등 총체적인 환경오염을 유발하는 처리 곤란 물질로 전락하였고, 화석연료의 지속적인 사용에 따른 온실가스의 방출은 지구온난화를 촉진시켰다. 개발된 회분식 공정을 적용하는 음식물쓰레기 수소발효에서, 세계 최초로 수소 전환율과 초기 및 운전 pH와의 관계를 수학적으로 표현하였고, 동시에 최적화하였다. 최적 초기 및 운전 pH는 각각 7.50, 6.01이었다. 축산폐수를 음식물쓰레기의 수소발효에 보조기질로 첨가 시 pH 제어를 위해 요구되는 알칼리량을 감소시킴과 동시에 수소발생률도 크게 증대시킬 수 있음을 관찰할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.95-110
• /
• 2013

In the recent decade, practical of wavelet technique is being utilized in various domain of science. Particularly, engineers are interested to the wavelet solution method in the time series analysis. Fundamentally, seismic responses of structures against time history loading such as an earthquake, illustrates optimum capability of systems. In this paper, a procedure using particularly discrete Haar wavelet basis functions is introduced, to solve dynamic equation of motion. In the proposed approach, a straightforward formulation in a fluent manner is derived from the approximation of the displacements. For this purpose, Haar operational matrix is derived and applied in the dynamic analysis. It's free-scaled matrix converts differential equation of motion to the algebraic equations. It is shown that accuracy of dynamic responses relies on, access of load in the first step, before piecewise analysis added to the technique of equation solver in the last step for large scale of wavelet. To demonstrate the effectiveness of this scheme, improved formulations are extended to the linear and nonlinear structural dynamic analysis. The validity and effectiveness of the developed method is verified with three examples. The results were compared with those from the numerical methods such as Duhamel integration, Runge-Kutta and Wilson-${\theta}$ method.

• 한국경영과학회지
• /
• 제39권3호
• /
• pp.51-61
• /
• 2014

In this paper, we deal with developing a cost estimation relationships (CER) for Korean maneuverable weapons systems using historical production cost. To develop the CER, we collected the historical data of the production cost of four tanks and five armored vehicles. We also analyzed the Required Operational Capability (ROC) of the weapons systems and chose cost drivers that can compare operational capabilities of the weapons systems We used Forward selection, Backward selection, Stepwise Regression and $R^2$ selection as the cost drivers which have the greatest influence with the dependent variables. And we used Principle Component Regression, Robust Regression and Weighted Regression to deal with multicollinearity and outlier among the data to develop a more appropriate CER. As a result, we were able to develop a production cost CER for Korean maneuverable weapons systems that have the lowest cost errors. Thus, this research is meaningful in terms of developing a CER based on Korean original cost data without foreign data and these methods will contribute to developing a Korean cost analysis program in the future.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.429-436
• /
• 2018

The RCS value of maritime ship is indicator of ship's stealth performance and it should be particularly measured for navy ship to ensure survivability on the battlefield. In the design phase of the navy ship, a RCS prediction should be performed to reduce RCS value and achieve ROC(Required Operational Capability) of the ship through configuration control. In operational phase, the RCS value of the ship should be measured for verifying the designed value and obtaining tactical data to take action against enemy missile. During the measurement of RCS for the ship, ship motion can be affected by roll and pitch in accordance with sea state, which should be analyzed into threat elevation from view point of enemy missile. In this paper, we propose a method to measure and analyze RCS of ship in 3-dimensions using a ship motion measuring instrument and a fixed RCS measurement system. In order to verify the proposed method, we conducted a marine experiment using a test ship in sea environment and compared the measurement data with RCS prediction value which is carried by prediction SW($CornerStone^{TM}$) using CAD model of the ship.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.117-124
• /
• 2015

RAM (Reliability, Availability and Maintenance) has been applied to design and analysis tools which affects system's operational sustainability and its life cycle cost as RAM-c(2009 DoD). RAM-c plays also an important role to guarantee the system engineering for mission assurance. Reliability is highly related to the probability of system failure. Availability means mission capability or the condition of ready to mission. Maintenance includes both the repair to recover the system in the event of failure/unexpected breakdown and proactive maintenance to prolong the design service life of the system or machinery. It is the purpose that this paper is to analyze and conclude the objective service life of UAV. The more UAV is operated, the less the level of its reliability becomes. Repairing failures and supplying spare parts on time, system reliability could be improved up until the time over target. Applying statistical Weibull distributions, this paper suggests the analysis of the design service life and economic life of UAV based on RAM-c with operational data.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.72-78
• /
• 2008

The speed variation of SRM is fulfilled throughout a transition from chopping control to single pulse operation. (i,e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.