• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.593-606
• /
• 2015

This paper presents a novel concept of healing some of the damages in wind turbine blades (WTBs) such as cracks and delamination. This is achieved through an inherent functioning autonomous repairing system. Such wind turbine blades have the benefit of reduced maintenance cost and increased operational period. Previous techniques of developing autonomous healing systems uses hollow glass fibres (HGFs) to deliver repairing fluids to damaged sites. HGFs have been reported with some limitations like, failure to fracture, which undermines their further usage. The self-healing technique described in this paper represents an advancement in the engineering of the delivery mechanism of a self-healing system. It is analogous to the HGF system but without the HGFs, which are replaced by multiple hollow channels created within the composite, inherently in the FRP matrix at fabrication. An in-house fabricated NACA 4412 WTB incorporating this array of network hollow channels was damaged in flexure and then autonomously repaired using the vascular channels. The blade was re-tested under flexure to ascertain the efficiency of the recovered mechanical properties.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1245-1251
• /
• 2012

Recently, needs of recreational marine industry are consistently increasing due to increasing of income and pursuit on well-being. For these needs, central government and local governments have tried to build tens of marinas to meet demands and promote related industries. Therefore, need of smart pedestal system has also increased. However, domestic companies have not manufactured smart pedestal systems, so many pedestal systems have been imported from advanced countries such as England, Denmark, and Italy. This research has developed a smart pedestal system using IT convergence technology. This system is assembled by each several module which has its own function and board. Each module is not developed on an embedded OS. Instead, it has its customized operational software based on its kernel. Thus, this system brings about cost reduction of productions and maintenance.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.445-452
• /
• 2020

The air cleaning unit of K00 IFV(or Infantry Fighting Vehicle) has important roles to make sure the engine of the vehicle works precisely as filtering foreign substances in the air such as dust and sands. The entire components including scavenge fan which is one of the important inner part of the air cleaning unit are developed so that we can produce it domestically and don't need to import it from P^⁎⁎ Co., the original maker in United Kingdom. This paper introduces a few verification processes including cleaning efficiency and reliability. As this core unit has developed successfully the improvement of military strength and logistics support can be expected. And design capability, manufacturing skills, maintenance ability of tracked weapon system will be increased thanks to the accumulated technical knowledge obtained from this developing project. Foreign currency savings and reducing operational cost can be expected as well in military industry.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.393-408
• /
• 2004

There exists a clear need to monitor the performance of civil structures over their operational lives. Current commercial monitoring systems suffer from various technological and economic limitations that prevent their widespread adoption. The wires used to route measurements from system sensors to the centralized data server represent one of the greatest limitations since they are physically vulnerable and expensive from an installation and maintenance standpoint. In lieu of cables, the introduction of low-cost wireless communications is proposed. The result is the design of a prototype wireless sensing unit that can serve as the fundamental building block of wireless modular monitoring systems (WiMMS). An additional feature of the wireless sensing unit is the incorporation of computational power in the form of state-of-art microcontrollers. The prototype unit is validated with a series of laboratory and field tests. The Alamosa Canyon Bridge is employed to serve as a full-scale benchmark structure to validate the performance of the wireless sensing unit in the field. A traditional cable-based monitoring system is installed in parallel with the wireless sensing units for performance comparison.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1627-1632
• /
• 2013

Cloud computing technology for the company's IT infrastructure, reduce the maintenance burden and the company's IT technology to achieve cost savings through innovation in the high field of economic expectations. In particular, cloud computing monitoring system based on the Android is maturing necessary operational solutions in the IT infrastructure environments. Therefore, in this paper, cloud computing environment in terms of user management and real-time server check the situation in case of abnormalities Android phones are sent through the reality of sulfur and this situation of the server administrator to remotely diagnose and treatment system and to development a viable technology is applied.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.230-237
• /
• 2006

The operational parameters and control strategies of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. Methanol addition was controlled based on the COD/N ratio or McCarty's equation. Constant COD/N ratio control results in excess addition under large diurnal fluctuation of $NOx^--N$, and McCarty's equation can be used to add appropriate amount of methanol. Control of methanol addition by on-line nitrate measurement, control of aeration by on-line DO measurement, and control of backwashing by head loss measurement are successfully operated. These results proved that this process prove the easy-maintenance and cost-effectively treatment is attainable.

• Ceramist
• /
• v.22 no.1
• /
• pp.56-69
• /
• 2019

Recent advances in low-power sensors and transmitters are driving the search for standalone power sources that utilize unused ambient energy. These energy harvesters can alleviate the issues related to the installation and maintenance of sensors. Particularly piezoelectric energy harvesters, with the ability to convert ambient mechanical energy into useful electricity, have received significant attention due to their high energy density, low cost and operational stability over wide temperature and pressure conditions. In order to maximize the generated electrical power, the natural frequency of the piezoelectric energy harvester should be matched with the dominant frequency of ambient vibrations. However, piezoelectric energy harvesters typically exhibit a narrow bandwidth, thus, it becomes difficult to operate near resonance under broadband ambient vibration conditions. Therefore, the resonating of energy harvesters is critical to generate maximum output power under ambient vibration conditions. For this, energy harvesters should have broadband natural frequency or actively tunable natural frequency with ambient vibrations. Here, we review the most plausible broadband energy harvesting techniques of the multi-resonance, nonlinearity, and self-resonance tuning. The operation mechanisms and recent representative studies of each technique are introduced and the advantages and disadvantages of each method are discussed. In addition, we look into the future research direction for the broadband energy harvester.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.667-672
• /
• 2009

In case of high-levelled platform in the urban railway system, a certain width of gap is inevitably formed between the train and the platform, and the gap gets wider when it is concerned with curved portion of the tracks at platform. This gap greatly contributes to decrease of passengers' safety while boarding and alighting a train. In particular, it endangers children's safety. Gap filler system is often fitted out to minimize gap and to overcome this safety problem at platform. However, as existing gap fillers are in most case structurally complex and organized to be powered from separate supply unit, there are a range of non-favorable points from the viewpoint of cost, installation and maintenance. In addition, existing gap fillers are due to cause disruptions in operation of train, with failures such as malfunctioning of control system. In this study, the authors will review on the gap filler applicable to the platforms of various height types, which neither requires any modifications of the train nor causes any operational disruptions. The proposed gap filler system here is a by-stage retractile type and based on the idea of interlocking it with train doors open-close mechanism, without any additional power supply unit or control system.

• International Journal of Reliability and Applications
• /
• v.13 no.1
• /
• pp.1-17
• /
• 2012

This Paper deals with the stochastic behavior and failure analysis of a Viscose Staple Fibre Plant which produces fibre for making clothes. The fibre making plant is a complex system with various subsystems as: Vendor (supplies Charcoal and Sulphur, raw materials for the process), Carbon di sulphide Plant, Acid Plant, Pulp Plant and Processing Plant. The considered system can completely fail due to failure of any of the subsystems. The Carbon di Sulphide Plant can fail in two different ways, due to lack of Sulphur or Charcoal. Processing Plant has the configuration 5-out-of-10: d and 6-out-of-10: f. It is also assumed that the system can fail due to workers strike and catastrophic failure. All failures follow exponential time distribution whereas all repairs follow general time distribution. Preventive Maintenance policy has been applied to reduce the failure in the system. Various reliability characteristics such as transition state probabilities, steady state behavior, reliability, availability, M.T.T.F and the cost analysis have been obtained using supplementary variable technique and Gumbel-Hougaard copula methodology.

• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.53-75
• /
• 2015

This paper provides an overview of the role of membranes in bioelectrochemical systems (BESs). Bioelectrochemical systems harvest clean energy from waste organic sources by employing indigenous exoelectrogenic bacteria. This energy is extracted in the form of bioelectricity or valuable biofuels such as ethanol, methane, hydrogen, and hydrogen peroxide. Various types of membranes were applied in these systems, the most common membrane being the cation exchange membrane. In this paper, we discuss three major bioelectrochemical technology research areas namely microbial fuel cells (MFCs), microbial electrolysis cells (MECs) and microbial desalination cells (MDCs). The operation principles of these BESs, role of membranes in these systems and various factors that affect their performance and economics are discussed in detail. Among the three technologies, the MFCs may be functional with or without membranes as separators while the MECs and MDCs require membrane separators. The preliminary economic analysis shows that the capital and operational costs for BESs will significantly decrease in the future due mainly to differences in membrane costs. Currently, MECs appear to be cost-competitive and energy-yielding technology followed by MFCs. Future research endeavors should focus on maximizing the process benefits while simultaneously minimizing the membrane costs related to fouling, maintenance and replacement.