• Progress in Superconductivity and Cryogenics
• /
• v.9 no.4
• /
• pp.32-36
• /
• 2007

We fabricated and tested a novel hybrid superconducting fault current limiter (SFCL) of three-phase $24kV_{rms}/630A_{rms}$ rating. In order to apply conventional resistive SFCLs into electric power systems, the urgent issues to be settled are as follows, such as initial installation price of SFCL, operation and maintenance cost due to ac loss of superconductor and the life of cryostat, and high voltage and high current problems. The ac loss and high cost of superconductor and cryostat system are main bottlenecks for real application. Furthermore in order to increase voltage and current ratings of SFCL, a lot of superconductor components should be connected in series and parallel which resulted in extreme high cost. In addition, the method to quench all components at the same instant needs very sophisticated skill and careful operation. Due to these problems, the practical applications of SFCL were pending. Therefore, in order to make practical SFCL, the price of SFCL should be lowered and should meet the demand of utilities. We designed novel hybrid SFCL which combines superconductor and conventional electric equipment including vacuum interrupter, power fuse and current limiting reactor. The main purpose of hybrid SFCL is to drastically reduce total usage of superconductor by adopting current commutation method by use of superconductor and high fast switch. Consequently, it was possible to get the satisfactory test results using this method, and further works for field tests are in the process.

• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.28-36
• /
• 2008

In this paper, a service mobility scheme using user's location & service information table management and user recognition skill is proposed to support the movement of the multimedia service user and provide the seamless multimedia service environment in home network. We analyzed the proposed scheme using queueing system and we built test bed for experiment onthe proposed scheme to verify the operation and performance. As a result, we can show the proposed scheme provides a seamless multimedia service through the new client terminal when a user move to the new location and shows the performance completing the service mobility through the new client terminal within the service delay time which is shorter than the service delay time generated in the previous scheme.

• Management & Information Systems Review
• /
• v.12
• /
• pp.1-15
• /
• 2003

As a rapid development of electronic commerce transactions in these days, the security and private protection problems became more important matters under the electronic transaction base. Because electronic transaction using electronic documents be carried without direct person to person meeting, there can be the possibility to use other's identity illegally without notice, and very hard to verify authenticity of transaction as well. In addition, it is very hard to find out that the electronic documents on the process of submitting is forged documents or not, and also have much difficulty in maintaining transmitting secret. Therefore, to solve such problems on electronic commerce transactions and electronic documents, the digital signature and certification system with cryptography skill is inevitably necessary. As the wide use of digital signature together with beginning of digital government and financial transaction, not only the issuance of electronic certification, but certification market came to gradually expand. In Korea, after enacting digital signature act in 1999, the act contents were expanded to the wide range of contents complying with global standards from the end of 2001 to April, 2002, including the new clause of certification problems. And the act was put into operation now. Therefore, in this paper, we'd like to suggest development scheme through the investigation on electronic certification related problems, such as, concepts, procedures, service conditions here and abroad.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.683-688
• /
• 2001

Cryogenic LNG(Liquefied Natural Gas) which is stored in the cylindrical storage tanks of $100,000m^{3}$ has very complex flow phenomena and the changes of thermal properties with exterior conditions and operation mdoes. These complex thermofluid behaviors are affected by the storage, exterior conditions of LNG, design specifications and heat transfer characteristics of tanks, Also, those have influence on the stable storage and supply of LNG in the storage tanks. Thus this study performed the analysis on the 2-D heat transfer of the tank with exterior conditions, on the Cool Down Process in order to cool down the LNG Storage Tank at the initial normal state, and on the Filling Process considered for incoming and rising of LNG. The analysis on the Mixing LNG Storage was studied too. At last, the visualized program on the complex thermofluidodynamic analysis was developed on the basis of the above analyses. The development of this program becomes to be used to the basic design of the commercial tanks as well as to assure technical skill of the analysis on the thermal stability of the stored LNG in the LNG Storage Tank.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.95-107
• /
• 1999

The design models of a new product in general are created using clay models or wooden mock-ups. The reverse engineering(RE) technology enables us to quickly create the CAD model of the new product by capturing the surface of the model using laser digitizers or coordinate measuring machines. Rapid prototyping (RP) is another technology that can reduce the product development time by fabricating the physical prototype of a part using a layered manufacturing technique. In reverse engineering process, however, the digitizer generates an enormous amount of point data, and it is time consuming and also inefficient to create surfaces out of these data. In addition, the surfacing operation takes a great deal of time and skill and becomes a bottleneck. In rapid prototyping, a faceted model called STL file has been the industry standard for providing the CAD input to RP machines. It approximates the CAD model of a part using many planar triangular patches and has drawbacks. A novel procedure that overcomes these problems and integrates RE with RP is proposed. Algorithms that drastically reduce the point clouds data have been developed. These methods will facilitate the use of reverse engineered geometric data for rapid prototyping, and thereby will contribute in reducing the product development time.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.107-117
• /
• 2003

Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. In order to reduce the polishing time and cope with the shortage of skilled workers, an automatic polishing robot system was developed. The polishing robot system is composed of two subsystems, a three-axis machining center and a two-axis polishing head. The machining center is controlled by a FANUC controller, and the polishing head by DSP controller. The system has five degrees of freedom and is able to keep the polishing tool normal to the die surface during operation. To easily operate the developed polishing robot system, this study developed an integrated operating program in the Windows environment. The program consists of five modules: a polishing data generation module, a code separation module, a polishing module, a graphic simulator module, and a teaching module. And, the automatic teaching system was developed to easily obtain teaching data and it consists of a three dimensional joystick and a proximity sensor. Also, to evaluate the performance of the integrated operating program and the polishing robot system, polishing experiments of a die of shadow mask were carried out.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2116-2124
• /
• 2000

In this paper we propose combustion control of refuse incineration plant using fuzzy model and genetic algorithm. At first fuzzy modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. Fuzzy model ca be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. Then genetic algorithms search and find out optimal control inputs over all possible solutions in respect to desired outputs and these are inserted to plant. In order to testify proposed control method, computer simulation was carried out. As a result, ISE of fuzzy model of refuse incineration plant is 0.015 and ITAE of control by proposed method, 352 which is better than that by manual operation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.10
• /
• pp.603-609
• /
• 2004

Procedural texture has many advantages that its representation is extremely compact and unfixed in resolution. However, it can be difficult for an end-user having no programming skill to build and debug. This paper presents a new interactive design system for procedural texture generation. The user's interactive design process based on multi-layer operations is represented with a graph structure, which consists of the data node, the operation and the output. Since our system generates automatically a shading language, a user who is not acquainted with implicit concepts can make procedural texturing by using an intuitive and flexible interface. Simulation results showed that the proposed method can make a variety of texture patterns efficiently.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.