• 한국항만학회지
• /
• 제13권2호
• /
• pp.323-332
• /
• 1999

The bus should supply an equal service to the whole community as feeder trip. However the existing bus route can not supply an effective feeder service in spite of the changes in the latent demand by the variety of regional structural change. This study aimed to establish the concept which frames the bus operation and management to cope with the latent demand to the bus. This study tackled this evidence by analyzing the transportation problems in terms of the urban growth emphasizing the following issues ; First, the strategy to improve the bus operation Second the land use control appropriate for the public transportation network Third economical range to justify the bus operation Second, the land use control appropriate for the public transportation network Third, economical range to justify the bus operation Fourth, the allowance for the private transportation mode On the latter part, the difference on the bus operation was compared to determine the range within which the bus operation could be justified. This study would provide some implications to improve the management for bus operation and fundamental information to develop the bus operation system.

• 지식경영연구
• /
• 제11권5호
• /
• pp.25-36
• /
• 2010

It is widely known that KMS (Knowledge Management System) plays a role of facilitator that contributes to upgrading the organizational performance. Despite this widespread belief, actual operation of KMS has been stalled at the level of being used only for the plain knowledge administration, not reaching the level of utilizing KMS strategically. In this sense, this case study suggests three successful KMS operation strategies-personalization strategy, socialization strategy, and technological strategy. Cases adopted in this study include HIRA(Health Insurance Review & Assessment Service) and KORAIL (Korea Railroad) where KMS has been successfully utilized to improve their organizational innovation and performance as well. Through scrutinizing the two cases, it was concluded that the proposed three KMS operation strategies have potentials of being generally applied to other KMS operation cases.

• 대한지역사회영양학회지
• /
• 제9권2호
• /
• pp.233-240
• /
• 2004

This study was design to grope the suggestions leading synergic effects by bridging the gap between headquarters and branch office, and so to identify the infra-system of contract foodservice management company (CFMC) necessary for operating any kind of branch office including school, hospital and business and industry (B＆I). Among 8 categories consisted of infra-system in CFMC, 'C8. Evaluation ＆ analysis for branch office's operation' was the most important category in the headquarter's viewpoint, while 'C3. Sanitation management system' was the most important category in branch office's viewpoint. In support and application, 'C3. Sanitation management system' was the highest category in both headquarters and branch offices including school, hospital and B＆I. As a result of analysis on gap between main and branch office in importance, support and application in 8 categories, the efforts of communication and community of perception for infrastructure were needed, because 'C4. Education ＆ training for human resource management (HRM) system' and 'C8. Evaluation ＆ analysis for branch office's operation' in importance, 'C2. Menu management system', 'C4. Education ＆ training for HRM system', 'C6. Facility ＆ utility support system' and 'C8. Evaluation ＆ analysis for branch office's operation' in support had a gap. Correlation analysis to grasp the relation between importance of infra-system and headquarters' support or branch office's application showed that headquarters's importance and support were correlated positively in 'C3. Sanitation management system', 'C6. Facility ＆ utility support system', 'C7. Customer satisfaction management system' and 'C8. Evaluation ＆ analysis for branch office's operation' and branch office's importance and application were correlated positively in 'C1. Procurement ＆ food processing system', 'C5. Management Information system', 'C7. Customer satisfaction management system' and 'C8. Evaluation ＆ analysis for branch office's operation'. Lastly, 'C6. Facility ＆ utility support system' in the branch office of school and hospital and 'C2. Menu management system' in the branch office of B＆I were high in importance, low in support and application, therefore Intensive support for these categories was needed. In conclusion, continuous check and improvement for categories, which were identified as an urgent problems to be solved in this study, among infra-structure qualifying for CFMC, would enable contract foodservice industry that has grown quantitatively till now to grow qualitatively.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.31-39
• /
• 2007

In this study we developed a turbidity management system to support the operation for effective turbid water management. The decision-making system includes various models for prediction of turbid water inflow, effective reservoir operation using the selective withdrawal facility, analysis of turbid water discharge in the downstream. The system is supported by the intensive monitoring devices installed in the upstream rivers, reservoirs, and downstream rivers. SWAT and HSPF models were constructed to predict turbid water flows in the Imha and Andong catchments. CE-QUAL-W2 models were constructed for turbid water behavior prediction, and various analyses were conducted to examine the effects of the selective withdrawal operation for efficient high turbid water discharge, turbid water distribution under differing amount and locations of turbid water discharge. A 1-dimensional dynamic water quality model was built using Ko-Riv1 for simulation of turbidity propagation in the downstream of the reservoirs, and 2-dimensional models were developed to investigate the mixing phenomena of two waters discharged from the Andong and Imha reservoirs with different temperature and turbidity conditions during joint dam operation for reducing the impacts of turbid water.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.364-371
• /
• 2016

The analysis on the international safety management code (ISM Code) and case of foreign national safety management for fishing vessel was conducted to serve as a basic data on the introduction of safety management system (SMS) for a deep-sea fishing vessel in Korea. As a result, Maritime New Zealand (MNZ) has managed operations of SMS in the maritime rules according to the Maritime Transport Act since 1994. MNZ underwent a safe ship management (SSM), which includes elements applied to shipping companies, ship and verification of the ISM Code for ships, except ISM Code application since 1998. In 2014 the introduction of the advanced maritime operator safety system (MOSS) superior to the SSM by MNZ was promoted actively switch and enforcement. Meanwhile, the safe operation manual of Japanese fishing vessel includes large part of the contents of the ISM Code, and voluntary implementation to fit the realities of the fishing vessel. The law application of SMS for a deep-sea fishing vessel after the newly establishment of the Ocean Industry Development Act to SMS would be advantageous to the schematic management, supervision, maintenance and application and, in 2016 from the implementation of maritime safety supervisor for a deep-sea fishing vessel that the management and supervision through the fishing vessel will be the efficient operation. The configuration of the safety management system in a deep-sea fishing vessel should be included as an element of ISM Code. The introduction of such a system is gradually applicable, such as nationality overseas vessel case study of the ISM Code, and vessels that are excluded from the application will be implemented as autonomous as Japan. The results are expected to contribute to sustainable development in the ocean industry safety culture spread throughout the ocean industry through the enhancement of safety fishing competency and safety management responsibility of fisher.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.669-679
• /
• 2018

Energy consumption savings in buildings should be reviewed in diverse areas such as air conditioning system and lighting responsible for cooling and heating, and energy management systems such as BAS (Building Automation System) and BEMS (Building Energy Management System) are introduced to improve energy consumption efficiency and to promote economic control of related facilities by integrated management of energy generated and consumption in buildings. The measured building of this study uses regenerative geothermal system. Measured values of heat pump and system COP were 4.7 and 4.2 respectively, and they were found to be higher 11.9% and 23.5% than rated values. As a result of analyzing the air conditioning and lighting energy from the first floor to the fourth floor performing the air conditioning, the second and third floors, which have a high frequency of use, are compared with the first and fourth floors 50% higher energy consumption ratio. On the other hand, the general heat storage system uses the nighttime power of the previous day to store heat and use it the next day. The total number of days of abnormal operation during the summer season is 61 days. The electricity cost corresponding to the abnormal operation is 1,840,641 KRW, and the normal operation using the nighttime power is 1,363,561 KRW, which is difference of 477,080 KRW, 35% increase in cost. We will utilize it as the main data of BEMS through analysis of winter operation characteristics as well as summer operation characteristics.

• 스마트미디어저널
• /
• 제7권2호
• /
• pp.71-77
• /
• 2018

본 논문에서는 신재생에너지 발전과 연계한 에너지저장시스템(ESS)의 최적 운영을 위한 에너지관리시스템(EMS)의 구성요소 설계 시 고려할 기능, 운영 효과 분석과 전력요금 절감 방안을 제안한다. 이를 위해 태양광 발전 시스템에 리튬이온전지 기반의 배터리 시스템과 에너지관리시스템 연계 및 구축방안을 제시하고, 1년 동안 운영 데이터에 대한 분석한 결과를 기술한다. 또한 시스템 운영 효과를 높이기 위한 방안으로 EMS를 이용하여 최대수요 발생시간대의 피크전력을 경부하 시간대 충전전력으로 대체하여 ESS 전용 요금제에 따른 요금편익과 부하 평준화에 기여하는 효과를 제안한다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.753-759
• /
• 2016

Power automation system to operate power distribution systems can be distinguished by distribution SCADA with remote monitoring and control; and distribution automation system with basic functions such as service restoration to the distribution SCADA; and distribution management system which is operated by various applications in order to enhance distribution system operation performance based on the distribution automation system. In the technological change, a technical boundary of information technology (IT) and operation technology (OT) is being blurred by that new concepts such as interoperability. In addtion, IT/OT convergence has been proposed by the improvement of ICT and power system technology. At the viewpoint, advanced distribution management system (ADMS) to have the new concepts and to increase distribution system operation efficiency through global information and functions from the other systems has been proposed. In order to implement the ADMS, IT and OT have to be employed together on the ADMS; and the concept-based IT/OT convergence concept has been presented. Therefore, this paper introduces ADMS and IT/OT convergence and proposes a design of IT/OT convergence based ADMS system design with configurations and functions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1134-1139
• /
• 2009

Haul routes for earthmoving operation need to be carefully selected because the decision on the haul routes could make a significant difference in the project's cost and time. This paper proposes a decision support system for improving productivity of earthmoving operation that helps construction managers choose the best haul routes of trucks based on time slots. Also, a methodology for optimal selection of haul routes considering traffic conditions and topographic conditions of the routes is explained. Raster data model is used to find an available shortest path based on cost weighted distance. A system was developed on a geographic information system environment for efficient database management and easy manipulation of graphical data. A real-world case study was conducted to verify the applicability of the proposed system.