• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2022

Recently, e-scooters have been attracting attention as eco-friendly modes of transportation in cities due to an increasing interest in the environment. Accordingly, various studies on usage behavior are being conducted, but studies that reflect individual travel attitudes are insufficient. Therefore, this study surveyed commuters in Seoul and analyzed respondents' traveling attitudes through factor analysis. It also built a binary logistic regression model for the intention to use shared e-scooters to determine how individual travel behaviors are affected. In particular, the model results showed that age, the main mode of transportation (car), walking time to the bus stop, and four travel attitude variables (disutility of travel, preference to self-drive, internet/smartphone friendliness, and willingness to pay extra money for services) significantly affected the intention to use shared e-scooters. This study is expected to be used as basic data, with aspect to travel behavior, for the efficient operation and use of shared e-scooters in the future.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.683-686
• /
• 2023

In this paper, we designed a Delayed Dual Core Lock-Step (D-DCLS) processor where two cores operate same instructions with delay and the result is compared to mitigate soft errors and common mode failures in automotive electronic systems. Because D-DCLS does not know which core an error occurred in, each core must be recovered to the point before the error occurred, but complex hardware modifications are required to return all intermediate values on the pipeline stage. In this paper, in order for easy hardware implementation, all register values are saved to a buffer whenever a branch instruction is executed. When an error is detected, the saved register values are automatically restored, and then 'BX LR' instruction is executed to return to the last branch point. The proposed D-DCLS processor was designed using Verilog HDL and was confirmed to continue normal operation after automatically recovering error.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.221-229
• /
• 2023

Recently, Grid-forming(GFM) converter, which offers features such as virtual inertia, damping, black start capability, and islanded mode operation in power systems, has gained significant attention. However, in low-voltage microgrids(MG), it faces challenges due to the coupling phenomenon between active and reactive power caused by the low line impedance X/R ratio and a non-negligible power angle. This power coupling issue leads to stability and performance degradation, inaccurate power sharing, and control parameter design problems for GFM converters. Therefore, this paper serves as a review study on not only control methods associated with GFM converters but also power decoupling techniques. The aim is to introduce promising control methods and enhance accessibility to future research activities by providing a critical review of power decoupling methods. Consequently, by facilitating easy access for future researchers to the study of power decoupling methods, this work is expected to contribute to the expansion of distributed power generation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.344-353
• /
• 2023

In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.583-589
• /
• 2003

With the purpose of identifying significant risk factors in poststernotomy sternal wound infection and mediastinitis, we underwent a retrospective analysis of the whole patients operated on at the our department of cardiovascular surgery for the two years. Material and Method: From March 200f to March 2003 at the depart-ment of cardiovascular surgery, medical school of Soonchunhyang University, major sternal wound infections had been developed in 12 (9.76%) of 123 consecutive patients. These patients underwent open-heart procedure through a midline sternotomy and survived long enough for infection to appear. For this group of patients, we evaluated possible risk factors such as age, sex, diabetes mellitus, chronic obstructive pulmonary disease, obesity, interval between hospital admission and operation, type of surgical procedure, elective or emergency surgical procedure, reoperation, duration of surgical procedures, duration of cardiopulmonary bypass, amount of blood transfused, post-operative blood loss, chest reexploration, rewiring of a sterile sternal dehiscence, duration of mechanical ventilation, and days of stay in the intensive care unit and analyzed these factors. Result: Analysis represented that age, sex, diabetes mellitus, type and mode of surgical procedure, reoperation, duration of operation, duration of cardio-pulmonary bypass, and interval between hospital admission and operation were not significantly associated with wound infection. For all other predisposing factors, p-values of less than .05 were demonstrated. Eight emerged as significant: early chest reexploration (p=0.001), sternal rewiring (p< 0.0001), chronic obstructive pulmonary disease (p<0.0001), blood transfusions (p<0.05), postoperative bleeding (p=0.008), days of stay in the intensive care unit (p< 0.0001), duration of mechanical ventilation (p=0.001), and obesity (p=.003). Conclusion: Contamination of pa-tients may occur before, during, and after the operation, and any kind of reintervention may predispose the patient to wound infection.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1919-1927
• /
• 1993

A new MAC protocol has been proposed and analysed to relieve the unfairness problems exhibited by the basic version of the DQDB standard. DQDB MAC protocol has the unfairness problems in throughputs. message delay and so or. And when the slots are reused or the file transmissions takes long, the unfairness problems in the system become worse. The new access protocol proposed here, which of called the Balanced DQDB, guarantees a fair bandwidth distribution by using one bit of the dual bus network protocol and keeps up all characteristics of DQDB. the DQDB analysis model introduced by Wen Jing, et al, was considered to analyse a sequential balance distribution of solts. And the probabilities of the empty in operation mode were represented to determine the probabilities for busy bits to generate on each node of the bus using the Markov chain. Through the simulations. the performances of the proposed Balanced DQDB and that of the standard DQDB of the BWB mechanism were compared at the state that the values of the RQ or CD counter on each node varied dynamically. As the results, it is shown that the Balanced DQDB has the decrement of throughputs in upstream, but the numbers of the used empty slots at each node of the Balanced DQDB had more than that of the others because the Balanced DQDB has over 0.9 throughputs in the 70~80% nodes of total node and it has constant throughputs at each node. And there results were analogous to that of the analytical model.

• Journal of the Korean Regional Science Association
• /
• v.9 no.1
• /
• pp.65-78
• /
• 1993

In this study, the significant and enduring concentration of federal R&D spending in metro-scale clusters across the nation is treated as evidence of the operation of a distinct industrial infrastructure defined by the ability of R&D performers to attract external funding and pursue the sophisticated project work demanded. It follows, then, that the agglomerative potential of these R&D concentrations -- performers and their support infrastructures -- requires a search for economic impacts guided by a different stimulative effects attributable to federal R&D spending may be that substantial subnational economic impacts are routinely obscured and diluted by research designs that seek to discover impacts either at the level of nation-scale economic aggregates or on firms or specific industries organized spatially. Therefore, this study proceeds by seeking to link the locational clustering of federal contract R&D spending to more localized economic impacts. It tests a series of models(X-IV) designed to trace federal contract R&D spending flows to economic impacts registered at the level of metro-regional economies. By shifting the focus from funding sources to recipient types and then to sector-specific impacts, the patterns of consistent results become increasingly compelling. In general, these results indicated that federal R&D spending does indeed nurture the development of an important nation-spanning advanced industrial production and R&D infrastructure anchored primarily by two dozed or so metro-regions. However, dominated as it is by a strong defense-industrial orientation, federal contract R&D spending would appear to constitute a relatively inefficient national economic development policy, at least as registered on conventional indicators. Federal contract R&D destined for the support of nondefense/civilian(Model I), nonprofit(Model II), and educational/research(Mode III) R&D agendas is associated with substantially greater regional employment and income impacts than is R&D funding disbursed by the Department of Defense. While federal R&D support from DOD(Model I) and for-profit(Model II) and industrial performer(Model III) contract R&D agendas are associated with positive regional economic impacts, they are substantially smaller than those associated with performers operating outside the defense industrial base. Moreover, evidence that the large-business sector mediates a small business sector(Model VI) justifies closer scrutiny of the relative contribution to economic growth and development made by these two sectors, as well as of the primacy typically accorded employment change as a conventional economic performance indicator. Ultimately, those regions receiving federal R&D spending have experienced measurable employment and income gains as a result. However, whether or not those gains could be improved by changing the composition -- and therefore the primary missions -- of federal R&D spending cannot be decided by merely citing evidence of its economic impacts of the kind reported here. Rather, that decision turns on a prior public choice relating to the trade-offs deemed acceptable between conventional employment and income gains, the strength of a nation's industrial base not reflected in such indicators, and the reigning conception of what constitutes national security -- military might or a competitive civilian economy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.19-27
• /
• 2007

This paper presents power supply-insensitive Gbps low power LVDS I/O circuits. The proposed LVDS I/O has been designed and simulated using 1.8V, $0.18\;{\mu}m$ TSMC CMOS Process. The LVDS I/O includes transmitter and receiver parts. The transmitter circuits consist of a differential phase splitter and an output stage with the switched capacitor common mode feedback(SC-CMFB). The differential phase splitter generates a pair of differential signals which provides a balanced duty $cycle(50{\pm}2%)$ and phase difference$(180{\pm}0.2^{\circ})$ over a wide supply voltage range. Also, $V_{OD}$ voltage is 250 mV which is the smallest value of the permissible $V_{OD}$ range for low power operation. The output buffer maintains the required $V_{CM}$ within the permissible range$(1.2{\pm}0.1V)$ due to the SC-CMFB. The receiver covers a wide input DC offset $range(0.2{\sim}2.6\;V)$ with 38 mV hysteresis and Produces a rail-to-rail output over a wide supply voltage range. Beside, the designed receiver has 38.9 dB gain at 1 GHz, which is higher than conventional receivers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.