• 수산해양기술연구
• /
• 제35권3호
• /
• pp.237-241
• /
• 1999

It was investigated that the condition of fishing ground gave what kind of effect school type in relation to the property for the target school after the vertical temperature profile and school type were observed when tuna purse seiner for tuna purse seine was operated in the western pacific Ocean around the equator between December 12, 1993 and January 26, 1994. The results are as follows;1. This study divided fish schools associated with drift objects, a one targeted-operation, and the pelagic migrating fish schools that are another one for the property. The total of 23 operations were complected including 6 that targeted fish schools associated with drift objects and 17 that targeted pelagic migrating fish schools. It was known that the main operation was conducted on pelagic migrating fish school.2. Average and standard deviation of the depth of the surface mixing layer was 86.0m and 13.8m for fish schools associated with drift objects. 61.6m and 13.0m for pelagic migrating fish schools, respectively. The average depth of the surface mixing layer of the pelagic migrating fish schools was lower when compared to the fish schools associated with drift objects however the concentration of standard deviation was higher than those fish schools associated with drifted objects. Accordingly, it was assumed that the effect of vertical temperature profile for pelagic migrating fish school was higher than the fish schools associated with drift objects.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.71-78
• /
• 2011

본 논문에서는 영구자석 동기 전동기의 센서리스 운전에 있어, 제어에 사용되는 제정수의 오차가 각도 추정 성능에 미치는 영향을 분석하였다. 회전 자속의 위치를 추정하는데 사용되는 위치 오차 정보를 부호 요인과 이득 요인으로 나누어, 그 중에 각도 추정의 편차를 초래하는 부호 요인을 중심으로 제정수 오차가 각도 추정 성능에 미치는 영향을 분석하였다. 본 논문에서는 센서리스 제어에 사용되는 저항과 인덕턴스의 오차로 표현되는 각도 추정 편차의 함수를 수식적으로 도출하였고, 모의실험 및 실험을 통해 도출된 수식의 타당성을 검증하였다.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.981-985
• /
• 2007

We present a MEMS-based portable Direct Methanol Fuel Cell (micro-DFMC), featured by a platinum sputtered microcolumn electrode and a built-in fuel chamber containing a limited amount of methanol fuel. Also presented is a micro-DMFC stack structure having a common electrolyte sandwiched by the microcolumn electrodes. The single cells with ME16 and PE16 electrodes show the maximum power densities of $31.04{\pm}0.29{\mu}W/cm^2$ and $9.75{\pm}0.29{\mu}W/cm^2$, respectively; thus indicating the microcolumn electrode (ME16) generates the power density (3.2 times) higher than the planar electrode (PE16). The single cell tests of ME16 and ME4 electrodes (Fig.8) show the maximum power of $31.04{\pm}0.29{\mu}W/cm^2$, and $25.23{\pm}2.7{\mu}W/cm^2$, respectively; thus demonstrating the increased window frame reduces the normalized standard power deviation (standard deviation over the average power). The normalized deviation of 0.11 in ME4 cell has been reduced to 0.01 in ME16 cell due to the increased window frames. The maximum power density of 4-cell stack is 15.7 times higher than that of the single cell. 4-cell stack produces the power capacity of 20.3mWh/g during 980min operation at the voltage of 450mV with the load resistance of $800{\Omega}$.

• 인터넷정보학회논문지
• /
• 제12권1호
• /
• pp.131-139
• /
• 2011

본 연구는 수술환자에게 적용할 수 있는 수술 후 통증, 수술 후 오심 구토, 체온관리에 대한 웹 근거중심 실무 가이드라인 시스템을 개발하여 이를 적용하고 수술 환자의 수술 후 통증, 오심/구토, 체온관리에 대한 의료인의 지식정도와 환자의 만족도를 평가하기 위한 것이다. 수집된 자료는 SPSS/WIN 17.0 프로그램을 이용하여 평균, 표준편차, t-test, Repeated ANOVA로 분석하였다. 웹으로 구축한 근거중심 실무 가이드라인 적용 전과 후의 수술 후 통증, 수술 후 오심/구토, 수술환자 체온관리에 대한 지식정도와 환자 만족도에 유의미한 차이가 있었다.

• 융합보안논문지
• /
• 제6권1호
• /
• pp.55-63
• /
• 2006

본 논문에서는 차세대 패킷 네트워크에서의 성능 품질을 개선시키기 위한 하나의 접근 방안으로 패킷 지연에 대한 절대적 차별화 기능을 제공하는 알고리듬을 제안한다. 제안된 알고리듬은 임의 시간 구간에 도착될 입력 트래픽을 예측하고 이를 기반으로 지연 제어 기능을 수행한 후 실제로 입력된 트래픽을 측정하여 예측 오차를 도출하고 이를 다음 시간 구간에서 보상하는 것을 특징으로 한다. 제안된 방식은 매 시간 구간마다 지속적으로 예측 오차를 보상함으로서 예측 편차가 높은 버스트 트래픽에 대하여 특히 우수한 성능을 제공한다. 모의 실험을 통해 제안된 방식은 절대적 성능 지표를 충족하고 기존 방식에 비해 버스트 트래픽에 대하여 우수한 적응성을 제공하는 것을 확인한다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.861-875
• /
• 2015

This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.416-426
• /
• 2008

The boiler tube failure often experienced in the superheater of a utility boiler can seriously affect the economic and safe operation of the power plant. It has been known that this failure is mainly caused by the thermal load deviation in the superheater tube system, and deeply intensified by the non-uniform distribution of steam flow rates. The nonuniform steam flow is distinctively prominent at low power load rather than at full power load. In this paper, we analyze the steam flow distribution in the superheater tube system by using one dimensional flow network model. At 30% power load, the deviation of steam flow rate is predicted to be within 0.8% of the averaged flow rate. This deviation can be reduced to 0.1% and 0.07% by assuming two cases, that is, the removal of 13th tube at each tube rows and the installation of intermediate header, respectively. The assumed two cases would be effective for the uniform steam flow distribution across 85 superheater tube rows.

• 한국지진공학회논문집
• /
• 제27권4호
• /
• pp.187-192
• /
• 2023

An elastic bearing must be strong against vertical loads and flexible against horizontal loads. However, due to the material characteristics of rubber, it may show variability due to the manufacturing process and environmental factors. If the value applied in the bridge design stage and the actual measured value have different values or if the performance during operation changes, the performance required in the design stage may not be achieved. In this paper, the seismic response of bridges was compared and analyzed by assuming a case where quality deviation occurs during construction compared to the design value for elastic bearings, which have not only always served as traditional bearings but also have had many applications in recent seismic reinforcement. The bearing's vertical stiffness and shear stiffness deviation were considered separately for the quality deviation. In order to investigate the seismic response, a time history analysis was performed using artificial seismic waves. The results confirmed that the change in the bearing's shear stiffness affects the natural period and response of the structure.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.161-165
• /
• 2023

This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.411-416
• /
• 1991

Operation simulation is a key factor to evaluate investment and operation in a power utility. Probabilistic production simulation is of major concern. With pumped-storage plant, production simulation is not an easy task, because its economy should fully be exploited. In addition, usual operation interval is a week rather than a day. Most existing models are based on approximate production simulation such as adopting simple priority orders of generations. This study is based on the more elaborate model developed by authors. Further, a policy of weekly coordination is established based on the Maximum Principle. Chronological load curve instead of usual load duration curve is used and the accuracy in simulation is enhahced. Resulting economics are compared. Deviation between these two toad curve is shown.