• Journal of Korean Neurosurgical Society
• /
• 제51권3호
• /
• pp.127-134
• /
• 2012

Objective: To analyze the prognostic factors thought to be related with survival time after a spinal metastasis operation. Methods: We retrospectively analyzed 217 patients who underwent spinal metastasis operations in our hospital from 2001 to 2009. Hematological malignancies, such as multiple myeloma and lymphoma, were excluded. The factors thought to be related with postoperative survival time were gender, age (below 55, above 56), primary tumor growth rate (slow, moderate, rapid group), spinal location (cervical, thoracic, and lumbo-sacral spine), the timing of radiation therapy (preoperative, postoperative, no radiation), operation type (decompressive laminectomy with or without posterior fixation, corpectomy with anterior fusion, corpectomy with posterior fixation), preoperative systemic condition (below 5 points, above 6 points classified by Tomita scoring), pre- and postoperative ambulatory function (ambulatory, non-ambulatory), number of spinal metastases (single, multiple), time to spinal metastasis from the primary cancer diagnosis (below 21 months, above 22 months), and postoperative complication. Results: The study cohort mean age at the time of surgery was 55.5 years. The median survival time after spinal operation and spinal metastasis diagnosis were 6.0 and 9.0 months. In univariate analysis, factors such as gender, primary tumor growth rate, preoperative systemic condition, and preoperative and postoperative ambulatory status were shown to be related to postoperative survival. In multivariate analysis, statistically significant factors were preoperative systemic condition (p=0.048) and postoperative ambulatory status (p<0.001). The other factors had no statistical significance. Conclusion: The factors predictive for postoperative survival time should be considered in the surgery of spinal metastasis patients.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.429-436
• /
• 2008

Membrane system has been increasingly considered as a safe and cost-effective water treatment process especially in case of small scale water works. This research is a basis of membrane application in water works through a long period test with obtaining operation skills and evaluation of water quality and cost competitiveness. For the research, the UF membrane system was installed in small water treatment plant that uses river-bed water as raw water. The system was consisted of 2 stage membrane and operated in constant flow mode (Flux: 1.5, 1.0, 0.9, 0.6). In each different flux condition, TMP trends were showed better results at lower flux condition. And through the high flux condition test, it is certified that membrane system could deal with breakdown of one stage. Water quality of permeate was satisfied the water quality standards especially turbidity. To know what mainly causes fouling on membrane, the test by membrane with several cleaning agents and EDX analysis have done in lab. Through the tests, ferrous concentration in raw water, backwashing water and membrane surface etc. was high and it causes fouling inside and outside of membrane. So acid cleaning using organic acid such as oxalic acid is necessary in Chemical in Place (CIP). At the economical aspect the electrical cost of membrane system is higher than that of slow sand filtration but labor cost can be reduced by automation. However, the use of labor should be determined considering effectiveness and stability of operation. Because during the operation, there are several breakdown such as electrical shock by lightning, water drop in summer, etc.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.285-291
• /
• 2011

Membrane fouling is an unavoidable phenomenon and major obstacle in the economic and efficient operation under sea water reverse osmosis (SWRO). When fouling occurs on the membrane surface, the permeate quantity and quality decrease, the trans-membrane pressure (TMP) and operation costs increase, and the membrane may be damaged. Therefore, chemical cleaning process is important to prevent permeate flow from decreasing in RO membrane filtration process. This study focused on proper chemical cleaning condition for Shuaibah RO plant in Saudi Arabia. Several chemical agents were used for chemical cleaning at different contact time and concentrations of chemicals. Also autopsy analysis was performed using LOI, FT-IR, FEEM, SEM and EDX for assessment of fouling. Specially, FEEM analysis method was thought as analyzing and evaluating tool available for selection of the first applied chemical cleaning dose to predict potential organic fouling. Also, cleaning time should be considered by the condition of RO membrane process since the cleaning time depends on the membrane fouling rate. If the fouling exceeds chemical cleaning guideline, to perfectly remove the fouling, certainly, the chemical cleaning is increased with membrane fouling rate influenced by raw water properties, pre-treatment condition and the point of the chemical cleaning operation time. Also choice of cleaning chemicals applied firstly is important.

• 충청수학회지
• /
• 제19권4호
• /
• pp.349-356
• /
• 2006

The aim of this paper is to endow a monoid structure on the set S of all oriented knots(links) under the operation ${\biguplus}$, called addition of knots. Moreover, we prove that there exists a homomorphism of monoids between ($S_d,\;{\biguplus}$) to (N, +), where $S_d$ is a subset of S with an extra condition and N is the monoid of non negative integers under usual addition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.137-139
• /
• 1991

This paper proposes a minimum power factor control for maximum efficiency operation of an induction motor, under low load condition. Minimum input or maximum efficiency operation is achived by properly adjusting the amplitude of the stator voltage, with the three phase AC voltage controller. Through the simulation, the relationships between the delay angle and input power under various load conditions are examined. Experimental results are also given, which show good coincidence with the simulation results.

• Journal of Chest Surgery
• /
• 제25권4호
• /
• pp.435-437
• /
• 1992

We experienced one case of immature teratoma at anterior mediastinum. the patient was Syears old female whose complain were cough and chest pain. Chest film showed mass density St the lower half of the Rt chest. Chest CT showed inhomogenous mass which have some calcified area. At the time of operation, 12x10x13cm sized mass have smooth surface and its stump elongated to the thymus. a-FP level, preoperative 22.5ng/ml, was decreased to 9.7ng/ml after operation. Postoperative adjuvant chemotherapy was performed with Vinblastin, Bleomycin and Cisplatin combination. The patient had an uneventful postoperative or postchemotherapy course and was discharged in a good condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2063_2064
• /
• 2009

Recently, load circuits and components of customer are various. Therefore failures of ELB(Earth Leakage Breaker) and MCCB(Molded case circuit breakers) are more frequent. Lite time of MCCB even if there is same units differ from environment, condition of operation. FEMCA is a efficiency method of system operation or maintenance for system reliability. We study on FMECA procedures and method. In this paper, we focused on FMECA application to MCCB life time test.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.224-227
• /
• 2001

In general, municipal solid waste incinerator fly ash (MSWIF) has a potential hazardous leaching of heavy metal with subsurface environment variation. Therefore, to remove the heavy metal from MSWIF electrokinetic technology were used. With constant current density condition heavy metals in MSWIF removed by ion migration. During 7 days operation 40~80% of Cr, Cd and As were removed and longer operation, 14 days treatment, showed 35~100% removal efficiency.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.185-188
• /
• 1999

KSTAR cryostat is a large vacuum vessel that provides the necessary thermal barrier between the ambient temperature test cell and the liquid helium cooled magnets. In this work, the structural analyses for the cryostat under the normal operation condition were performed. As a result, it turns out that the vessel would be safe when it is exposed to normal operation loads, such as system weight, vacuum pressure, and plasma vertical disruption load. And, the preliminary result on the modal analysis is presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.659-662
• /
• 1999

As utility pollution take a growing interest, ac/dc converter optimizing utility condition has been vigorously studied in decades. In this paper three phase DCM converter is analyzed and equations for average input currents are presented. Also relationships of voltage gain & duty according to angular velocity are presented and variable frequency controller is implemented using reset integrator which is designed in detail. In result power factor and THD characteristics of 3-stage and 4-stage operation ae compared respectively.