• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.228-230
• /
• 2008

The response time characteristic of low voltage liquid crystals (LCs) is investigated and a new simulator for low voltage LCs is proposed. In order to enable low voltage operation, it is important to minimize Vth of LCs and variation of pixel voltage caused by dynamic capacitance operation of LC Display. Because dynamic capacitance variation is much larger for low voltage LC operation compared to that of conventional LC material, it is necessary to make a better model for dynamic capacitance operation. A proposed minimizing Vth of LCs and variation of pixel voltage study results through a new constant charge model improve response characteristics for low voltage LCs operation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.280-286
• /
• 2006

The paper proposes a new protection algorithm for reliable operation of grid-interfaced PV system, which can flexibly interact with conventional protective schemes of power utility grid not only to prevent damages to utility or public persons and utility apparatus caused by malfunction or failure in distribution network protection system, but also to protect a PV system itself from faults or abnormal conditions of the network. The proposed algorithm is based on reclosing characteristics of the distribution system. As a network fault occurs, the new scheme determines whether it is momentary or permanent and responds in a pre-programmed way to the fault. For permanent outage, the proposed algorithm shuts down inverter's operations but monitoring system voltage and frequency at the point of common coupling with grid. When it comes to the momentary outage, Inverter starts stand-by operation mode so that it can be automatically connected to the grid without start-up procedures as soon as the system voltage and frequency returns into the normal operation range. In order to investigate' and evaluate the PV system operation, simulation study based on PSCAD/EMTDC has been carried out to verify the performance of the proposed protection scheme.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.55-61
• /
• 2000

In this paper we have discussed on the characteristics and modeling of machined geometry which was established for the case of round shape machining also the effects of externally machined profile are analyzed and its modeling realia-bility was verified by the experiments of roundness testing especially in lathe operation. In this study we established a harmonic geometric model with the parameter harmonic function. In general we can calculate the theoretical roundness profile with an arbitrary multilobe parameter. But in real experiments only 2-5 lobe profile was frequently measured, The most frequently measured ones are 3 and 5 lobe profile in experiments. With these results we can predict that these results may be applied to round shape machining such as turning drilling boring ball screw and cylindrical grinding operation in bearing and shaft making operation with the same method. in this study simulation and experimental work were performed to show the profile behaviors. we can apply these new modeling methods in real process for the predic-tion of part profile behaviors machined such as in round shape machining operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.75-78
• /
• 1998

The SONOSFET Shows low operation voltage, high cell density, anti good endurance due to modified Fowler-Nordheim tunneling as memory charge injection method. In this paper, therefore, the NOR-type Flash EEPROM composed of SONOSFET, which has fast lead operation speed and Random Access characteristics, is proposed. An 8${\times}$8 bit NOR-type SONOSFET Flash EEPROM had been designed and its electrical characteristics were verified. Read/Write/Erase operations of it were verified with the spice parameters of SONOSFETs which had Oxide-Nitride-Oxide thickness of 65${\AA}$-165${\AA}$-35${\AA}$ and that of scaled down as 33${\AA}$-53${\AA}$-22${\AA}$, respectively. When the memory window of the scaled-down SONOSFET with 8V operation was similar to that of the SONOSFET with 13V operation, the Read operation delay times of the scaled-down SONOSFET were 25.4ns at erase state and 32.6ns at program state, respectively, and those of the SONOSFET were 23.5ns at erase state and 28.2ns at program state, respectively.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.239-244
• /
• 2011

Due to large demand, the increase of fault current has caused the capacity of power machines in power grid to increase. Among several countermeasures, the superconducting fault current limiter (SFCL) has been noticed as one of the promising countermeasures to solve these problems. However, in spite of excellent current limiting performances of the SFCL, the application of SFCL to power system has been delayed due to both the limited space for the SFCL's installation and its longer recovery time after the fault removal. In order to solve these problems, a hybrid type SFCL was developed. In this paper, we studied the operation characteristics of the hybrid SFCL with first half cycle non-limiting operation by modelling using PSCAD/EMTDC and experiment. It was shown through the simulation using PSCAD/EMTDC and the simulated experiment that the fault current limiting and the fast recovery operations of the hybrid SFCL with the first half cycle non-limiting operation were achieved.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1109-1115
• /
• 2023

The shell and tube-type heat exchanger was the most utilized in industrial field because of its simple structure and wide operation conditions and so on. This study was performed to investigate the characteristics of behavior of thermal flow according to operation condition of small-sized shell and tube-type heat exchanger. The operation conditions, here, were set up to flow rate of hot air with temperature of 100℃, number of baffle and cut rate of baffle(BCR) using numerical analysis. As the results, both mean relative pressure and relative pressure drop was increased with quadratic curve in case of less than BCR 25%, however, decreased linearly in case of more than BCR 25%. The collision with first baffle by flow velocity and temperature, of hot air, respectively, was depended on BCR. Further it showed that the behaviors between flow velocity and temperature were almost similar.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 춘계학술대회 논문집
• /
• pp.20-25
• /
• 2001

In recent years, the concern about a user center design in increasing, and it's needed to task a user's visual cognitive characteristics for information presentation. Then this study aims to grasp user's cognitive characteristics about the information presentation by analyzing the fixation points. In the experiment, actually subject operated a copy machine. Recorded the fixation point movement of the operation panel by the eye mark recorder. Analysis examined the screen interface of the operation panel from the field of a fixation point trace. The top down type fixation oder by experience or the context became clear as a result. Furthermore, the difference of the fixation order by skill level was also examined. In this study, it was assumed that to grasp the visual cognitive characteristics becomes the key of efficient information.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.302-307
• /
• 2021

Polymer electrolyte membrane (PEM) electrolyzer or alkaline electrolyzer is required to produce green hydrogen using renewable energy such as wind and/or solar power. PEM and alkaline electrolyzer differ in many ways, instantly basic materials, system configuration, and operation characteristics are different. Building an optimal water hydrolysis system by closely grasping the characteristics of each type of electrolyzer is of great help in building a safe hydrogen ecosystem as well as the efficiency of green hydrogen production. In this study, the basic operation characteristics of a kW class alkaline water electrolyzer we developed, and water electrolysis efficiency are described. Finally, a brief overview of the characteristics of PEM and alkaline electrolyzer for large-capacity green hydrogen production system will be outlined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1029-1033
• /
• 2006

During operation of generator, the excitation force with 120Hz always exist irrespective of No. of poles. Therefore the vibration is generated in the stator end windings and the micro-crack is grown up inside the bars. After all, coolant water is leaked outside the bars or the stator is moved and is worn out. What is more, one bar is touched with another bar so a short circuit may frequently happen in operation. In order to prevent it from occurring, the evaluation of mechanical integrity for generator stator windings is carried out periodically during overhaul period. This help troublesome end windings to complement with insulation material and to change vibration characteristics. In this paper, the evaluation of mechanical integrity for generator stator windings is described and the change of vibration characteristics is analysed.

• 한국IT서비스학회지
• /
• 제6권3호
• /
• pp.87-110
• /
• 2007

Recently, researches on IT Service Management (ITSM) for improving information system operation service and information system outsourcing cost estimation model are proliferating. This study suggests a new cost model of IT operation service and optimizing method based upon the characteristics of operation service as a long-term and continuous business service for both user's and service provider's point of view. This study explains the cost optimization model of IT operation service by improving service request management process, such as adequate reception and control, proper valuation, process management using project management methodology, effective organization and time management of service personnel. Especially in this study, service ability improvement effect and fixed operation cost reduction effect are defined to prove the proposed new cost model.