• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.1
• /
• pp.17-22
• /
• 2016

It is very important to obtain a out-of season production in horticultural greenhouses corresponding with higher crop prices. A ground source heat pump system has been highly spotlighed as an energy efficient heating system for the greenhouse. This paper investigated the operating cost of the ground source heat pump system with the variation of generating temperature and designing methods for heating system of the greenhouse. Even though the COP of the ground source heat pump system decreased with an increment of generating temperature in heating mode, the operating cost could be reduced. By adopting the high temperature heat pump system and heat storage tank, it could be achieved to save energy and reduce the operating time of auxiliary oil heating system for producing good plant-growth in the greenhouse.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1840-1845
• /
• 2005

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC present many advantages such as lower power consumption, greater reliability, and lower cost. It is required to use an embedded operating system for building control systems. So far, the Real-Time operating system is widely used to implement a Real-Time system since it meets developer's requirements. However, Real-Time operating systems reveal a lack of standards, expensive development, and license costs. Embedded Linux is able to overcome these disadvantages. In this paper, the implementation of control system platform using Real-Time Embedded Linux is described. As a control system platform, we use XScale of a Soc and build Real-Time control platform using RTAI and Real-Time device driver. Finally, we address the feasibility study of the Real-Time Embedded Linux as a Real-Time operating system for mobile robots.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.4 no.1
• /
• pp.51-67
• /
• 1979

This paper considers the problem of determining an optimal dynamic operating policy for a two-stage tandem queueing service system in which the service facilities (or stages) can be operated at more than one service rate. At each period of the system's operation, the system manager must specify which of the available service rates is to be employed at each stage. The cost structure includes an operating cost for running each stage and a service facility profit earned when a service completion occurs at Stage 2. We assume that the system has a finite waiting capacity in front of each station and each customer requires two services which must be done in sequence, that is, customers must pass through Stage 1 and Stage 2 in that order. Processing must be in the order of arrival at each station. The objective is to minimize the total discounted expected cost in a two-stage tandem queueing service system, which we formulate as a Discrete-Time Markov Decision Process. We present analytical and numerical results that specify the form of the optimal dynamic operating policy for a two-stage tandem queueing service system.

• Laser Solutions
• /
• v.18 no.4
• /
• pp.12-16
• /
• 2015

The research on multi electron beam systems is being carried out by various methods. We are studying multi electron beam system using miniaturized electron beam columns. The column consists of electrostatic lenses, electrostatic deflector and tip emitter. Our operating system controls 4 column array, captures images of each column and maintains the instrument. We present the usefulness of our operating system for multi columns by capturing images of each column.

• 전기의세계
• /
• v.24 no.5
• /
• pp.97-102
• /
• 1975

This paper describes the result of a Study for the Optimum Operating method with Spinning reserve in case of outage of large generator unit to improve the system stability and prevent the system frequency drop. This is usually done by governor free operation, so we focused our attention to the operating Char acteristics of spinning reserve. Nexy, a study was made to mesure the upper limit of Spinning reserve and when this upper limit cannot match the required power, a relationship between the amount of spinning reserve and that of the load shedding requirement was searched with regard to several system operating conditions to use it in our future system operation. By this study, the optimum system operating method was recommended for reliable operation of power system.

• Journal of Biosystems Engineering
• /
• v.31 no.1 s.114
• /
• pp.39-45
• /
• 2006

Fundamental informations on performance of sets of solenoid valve and nozzle were necessary to develop a target selectable spraying system. The experiments were performed for the sets of solenoid valves and flat spraying nozzles at 3 levels of the operating pressures, and the obtained results are as follows; Rise time of the system pressure to reach up to 90% of the operating pressure after the valve turned was affected by nozzle size and operating pressure. Maximum overshoot of the system pressure was about 170% not affected by the sets of valve and nozzle and operating pressure. The system pressure after its settle down within 5% of the set pressure showed good uniformity in any condition of the experiment as less as 2.3% of its coefficient of variation. Time requirement to lower the system pressure down to 50% after the valve power turned off was affected by valve and nozzle set and operating pressure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.156-163
• /
• 2006

The objective of this paper is to evaluate the performance of an operating system for embedded devices to that of the commercially available Windows platform. Analysis includes benchmarking the operating systems using a 'typical' PC workload, as well as identifying low-level areas in which the updated OS is limiting or enhancing the system performance. The primary benchmarking suites selected for this paper are 'WinStone' and 'HBench', with the former providing an application-based suite of tests and the latter providing the most direct means for isolating operating system effects on the system. We have demonstrated in a case study for embedded microprocessors, and evaluated a Windows platform at a low-level test as well as an application level using a benchmarking suite.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1042-1051
• /
• 2011

In this paper, a total operating environment equipped with onboard wireless communication systems and ground-based mission control systems is proposed for simultaneous operation of multiple UAVs. A variety of operating structures are studied and classified systematically based on types and usages of the components. For each operating system, the strength, weakness and reliability aspects are investigated. Based on these results, a proper operating system configuration is determined and components are developed for mission formation flight. Proposed system can make a formation flight of various UAVs, execute complex missions decentralizing mission to several UAVs and cooperate several missions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.451-456
• /
• 2007

This paper presents a problem that reconfigure distribution power system using branch exchange method. Optimal reconfiguration problem calculates line loss, voltage condition about system states of all situations that become different according to line On/off status, and search for optimum composition of these. However, result is difficult to be calculated fast. Because radiated operation condition of system is satisfied using many connection and sectionalize switches in the distribution power system. Therefore, in this paper, optimization method for reducing system total loss and satisfying operating condition of radial and constraints condition of voltage is proposed using the fastest branch exchange. And optimal solution at branch exchange algorithm can be wrong estimated to local optimal solution according to initial operating state. Considering this particular, an initial operating point algorithm is added and this paper showed that optimal solution arrives at global optimal solution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.674-677
• /
• 2012

An operating system acts as an intermediary between your computer hardware and computer users to perform, that the user can run the program provides an environment in which. Therefore, the main purpose of the operating system having a computer available for your convenience and to effectively manage computer hardware. The popularization of the people who use computers, improve hardware performance, advent of the internet, popularity of wireless networks, Smartphone and Tablet PC appearance, advent of virtualization technologies and cloud computing, etc. began making changes to the operating system. In particular, cloud computing environments based on server virtualization and using a variety of wired and wireless devices with internet connection, a Web-based operating system was born. In this paper, the definition of a Web-based operating system, types and characteristics, an analysis of the pros and cons, and find out about the future prospects.