• International Journal of Railway
• /
• v.6 no.1
• /
• pp.26-31
• /
• 2013

Following the success of the KTX (Korea's first high-speed rail system) with a maximum operating speed of 300 km/h opened in 2004, experts in Korea started a research on the development of key technologies for high-speed rail (HSR) with a top speed of 500 km/h. This paper is a preliminary analysis of the research. It first reviews HSR experiences around the world, in terms of traffic and economic impacts of HSR, and presents a preliminary analysis of 500 km/h HSR in Korea. It is estimated that introduction of 500 km/h HSR with a 54% of travel time reduction will increase HSR passengers to about 9.8 million (about 78% of market share) between Seoul and Busan. It is a 23% of growth compared to the base scenario. Along with conventional rail passengers, air passengers are expected to be significantly impacted by the 500 km/h HSR. As a function of HSR travel time, the estimated market shares of both KTX and 500 km/h HSR compared to air are very comparable with previous international experiences. Based on the forecasted traffic, estimated total benefits are $758 million per year.

• Journal of Ship and Ocean Technology
• /
• v.12 no.1
• /
• pp.35-44
• /
• 2008

As arctic energy resource is attracting public attention, arctic shipping market will also be growing in large as expected to increase in LNG trade from Arctic area to the western countries by shipping. During the voyages through such routes, collision with icebergs may be possible. In the present report, ice collision analyses are carried out from a practical point of view to verify the safety of hull structural strength of LNG carriers equipped with GTT $MKIII^{TM}$ membrane type cargo containment system. From the results of collision analyses and the operation-friendly design concept of no-repairing of cargo containment system, a safe operating envelope against ice collision is proposed for LNG carriers of membrane type cargo containment system. Based on the currently proposed safety criteria, it is concluded that LNG carriers with membrane tank type can operate safely with regard to the integrity of CCS in regions where collision between LNG carrier and iceberg is expected.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.3
• /
• pp.240-246
• /
• 1990

The security control can be defined as all control actions and counter-measures to return the operating state of the system to a normal state. In an emergency state, fault clearing and/or overload suppression is enabled as a security control in order to prevent the extension of the fault. In the alert state, counter-measures should be set up in advance for the dangerous points of the system operation in drder to protect the system from expected accidents. In the normal state, the routine scenario is conducted to analyze system state. In the decision-making of the classification of system states, the heuristic and experienced knowledge can be well applied and thus application of expert system to this area attains considerable achievements. In this study, it is attempted to extract empirical rules through heuristic analysis and establish the knowledge base. Finally, the incorporation method with the conventional program packages in proposed. The expert system is designed to select an appropriate method and to perform the corresponding package. The input data can be automatically set up by using the data base. The computation results can be automatically added to the data base.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.953-967
• /
• 2017

In this paper, a complete station blackout (SBO) or complete loss of electrical power supplies is simulated and analyzed in a downward cooling 5-MW pool-type Material Testing Reactor (MTR). The scenario is traced in the absence of active cooling systems and operators. The code nodalization is successfully benchmarked against experimental data of the reactor's operating parameters. The passive heat removal system includes downward water cooling after pump breakdown by the force of gravity (where the coolant streams down to the unfilled portion of the holdup tank), safety flapper opening, flow reversal from a downward to an upward cooling direction, and then the upward free convection heat removal throughout the flapper safety valve, lower plenum, and fuel assemblies. Both short-term and long-term natural core cooling conditions are simulated and investigated using the RELAP5 code. Short-term analyses focus on the safety flapper valve operation and flow reversal mode. Long-term analyses include simulation of both complete SBO and long-term operation of the free convection mode. Results are promising for pool-type MTRs because this allows operators to investigate RELAP code abilities for MTR thermal-hydraulic simulations without any oscillation; moreover, the Tehran Research Reactor is conservatively safe against the complete SBO and long-term free convection operation.

• Tribology and Lubricants
• /
• v.37 no.5
• /
• pp.179-188
• /
• 2021

Reputed for their low friction coefficient and wear protection effect, diamond-like carbon (DLC) materials are considered amongst the most important lubricant coatings for tribological applications. In this framework, this investigation aims to elucidate the effect of a few operating parameters, such as applied stress and sliding amplitude on the friction lifetime of DLC coatings. Fretting wear tests are conducted using a 12.7 mm radius counterpart of 52100 steel balls slid against a substrate of the same material coated with a 2 ㎛ thickness DLC. Approximately, 5 to 57 N force is applied, generating a maximum Hertzian contact pressure of 430 to 662 MPa, corresponding to the applied force. The coefficient of friction (CoF) generates three regimes, first a running-in period regime, followed by a steady-state evolution regime, and finally a progressive increase of the CoF reaching the steel CoF value, as an indicator of reaching the substrate. To track the wear scenario, interrupted tests are performed with analysis combining scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), 3D profilometer and micro-Raman spectroscopy. The results show two endurance values: one characterizing the coating failure (Nc₁), and the other (Nc₂) indicating the friction failure which is situated where the CoF reaches a threshold value of μ_th = 0.3 in the third regime. The Archard energy density factor is used to determine the two endurance values (Nc₁, Nc₂). Based on this approach, a master curve is established delimitating both the coating and the friction endurances.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3347-3352
• /
• 2022

In 2013, the International Atomic Energy Agency (IAEA) changed the recommended maximum range of the Emergency Planning Zone (EPZ) to 30 km, and the Kori Nuclear Power Plant in Republic of Korea has also expanded the EPZ to 30 km, following the recommendation. As a result, metropolitan cities with a high population density are contained within the EPZ, and evacuating millions of people should be considered if the 30 km range of evacuation is to take place. This study proposes an evacuation plan using buses (public transportation) to transport people outside of the EPZ, quickly and efficiently. To verify the appropriate mode share ratio of buses that can guarantee the right of vulnerable road users and reduce traffic congestion, a model was built simulating the Kori Nuclear Power Plant in Ulsan Metropolitan City. The scenarios were established by changing the mode share ratio of buses and passenger cars by 10%. Considering a large-scale network analysis at the city level, a cell transmission model was applied to calculate the evacuation time in each scenario. The result shows that the optimal mode share ratio of buses is 40%, with a total evacuation time of 132 min, considering feasible bus fleets in Ulsan Metropolitan City.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.6-12
• /
• 2023

For the commercialization and standardization of autonomous vehicles, demand for rigorous safety criteria has been increased over the world. In Korea, the number of extraordinary service permission for automated vehicles has risen since Hyundai Motor Company got its initial license in March 2016. Nevertheless, licensing standards and evaluation factors are still insufficient for operating on public roadways. To assure driving safety, it is significant to verify whether or not the vehicle's decision is similar to human driving. This paper validates the safety of the autonomous vehicle by drawing scenario-based comparisons between manual driving and autonomous driving. In consideration of real traffic situations and safety priority, seven scenarios were chosen and classified into basic and advanced scenarios. All scenarios and safety factors are constructed based on existing ADAS requirements and investigated via a computer simulation and actual experiment. The input data was collected by an experimental vehicle test on the SNU FMTC test track located at Siheung. Then the offline simulation was conducted to verify the output was appropriate and comparable to the manual driving data.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1202-1208
• /
• 2022

Techniques based on computer vision are becoming increasingly important in construction safety monitoring. Using AI algorithms can automatically identify conceivable hazards and give feedback to stakeholders. However, the construction site remains various potential hazard situations during the project. Due to the site complexity, many visual devices simultaneously participate in the monitoring process. Therefore, it challenges developing and operating corresponding AI detection algorithms. Safety information resulting from computer vision needs to organize before delivering it to safety managers. This study proposes a framework for computer vision-aided construction safety monitoring using collaborative 4D BIM information to address this issue, called CSM4D. The suggested framework consists of two-module: (1) collaborative BIM information extraction module (CBIE) extracts the spatial-temporal information and potential hazard scenario of a specific activity; through that, Computer Vision-aid Safety Monitoring Module (CVSM) can apply accurate algorithms at the right workplace during the project. The proposed framework is expected to aid safety monitoring using computer vision and 4D BIM.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.116-125
• /
• 2023

Gimpo International Airport is a strategically utilized airport based on government policy, but there are many residents living around the airport, so it is very sensitive to changes in airport operation. In the past, similar noise results were obtained for aircraft noise at Gimpo International Airport despite changes in aircraft types and an increase in the number of aircraft operating, and recently ICAO proposed a low-noise aircraft noise standard (Ch.14). Since the new standard has a noise reduction effect of up to 15dB compared to existing aircraft noise, ICAO and Europe EASA predict that future aircraft noise will be reduced if the latest technologies such as low-noise aircraft are applied. Therefore, this study establishes the aircraft operation performance and measured noise of Gimpo International Airport in 2022 as a baseline scenario, noise changes using various scenarios of introduction of low-noise aircraft, operation of mid-to-long-distance routes, and changes in future air traffic demand were analyzed using simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.433-440
• /
• 2023

This study aims to establish safety zones for bunkering operations of hydrogen propulsion ships in coastal areas through risk assessment and evaluate their validity. Using a 350 kW-class ferry operating in Busan Port as the subject of analysis, with quantitative risk assessment based on accident consequence and frequency analysis, along with a social risk assessment considering population density. The results of the risk assessment indicate that all scenarios were within acceptable risk criteria and ALARP region. The most critical accident scenarios involve complete hose rupture during bunkering, resulting in jet flames (Frequency: 2.76E-06, Fatalities: 9.81) and vapor cloud explosions (Frequency: 1.33E-08, Fatalities: 14.24). For the recommended safety zone criteria in the 6% hose cross-sectional area leakage scenario, It could be appropriate criteria considering overall risk level and safety zones criteria for hydrogen vehicle refueling stations. This research contributes to establishing safety zone for bunkering operations of hydrogen propulsion ships through risk assessment and provides valuable technical guidelines.