• Journal of Information Technology Applications and Management
• /
• v.18 no.4
• /
• pp.55-79
• /
• 2011

This study attempts to examine the factors affecting the introduction of e-Business systems and also, to assess the effects of various e-Business systems on firm performance. Empirical analysis is carried out with firm data of 2009, which is collected from Firm Activity Survey of Statistics Korea. Firm performance is measured by four indexes; operating income per employee, value added per employee, return on assets, and return on sales. Empirical results indicate that a firm is more likely to introduce any e-Business system as its size and its assets per employee are larger and as its ratio of labor compensations to operating costs is lower. Additionally, a firm with higher skill levels and more fruitful management experiences is more likely to have any e-Business system. In general, it appears that the presence of e-Business, especially enterprise resources planning, has positive effects on the firm performance.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.732-737
• /
• 2001

The mathematical method was developed and numerical analyses were carried out with various parameters to provide substantial data for optimal design and operation of urban utility systems. The composition of systems and their specifications, such as co-generation system, heat pump system, incineration system and other heating and cooling system could be obtained through these analyses for various resource and energy requirements in urban area. As results the system constituents and operating characteristics, and their economic performances such as the value of objective function, initial and an operating costs were discussed for various load patterns. The effective system design method and the excepted effects of the several unused energy recovery systems were also briefly discussed with the variation of the buildings and facilities species and their capacities.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.286-291
• /
• 2001

This paper describes an optimal scheduling for ice slurry systems for energy cost saving. The optimization technique applied in the study is the dynamic programming method, for which the state variable is the storage in the ice storage tank and the control variable is the state of chiller's on-off switching. Though the costs during charge period is included in optimization by taking the average cost of ice per hour for slurry making, the time horizon for the simulation is limited building cooling period because accurate charge rate from the ice maker into the ice storage tank cannot be estimated during the charge period. In the operating simulation after optimizing procedure, energy consumption and operating cost for the optimal control are calculated and compared with them for a conventional control with one case of cooling load profile.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.153-160
• /
• 2000

Odor control for livestock and compost facilities has focused on manure handling and treatment during storage and land application, however, large amount of malodorous air is emitted and it is one of main sources of malodour in livestock farming. Biological treatment or biodegradation involves converting an organic contaminant to carbon dioxide and water using natural bacteria. Biofiltration is an effective air pollution control technology that uses microorganisms to breakdown gaseous contaminants and produce innocuous end products. Investment and operating costs on the biofiltration are lower than for thermal and chemical oxidation processes. This paper is intended to provide an overview of basic design and operating criteria for biofilters to control odors from livestock and compost facilities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1157-1163
• /
• 2008

Fuel represents a significant portion of the operating costs of voyages of the vessel. Under this situation, dramatic increase in fuel price caused a problem that earnings of ship becomes decreased seriously. Pumps in a cooling system of the vessel are often operated inefficiently. The reasons will vary from process to process and application to application. Inefficiency of pumps is one of the reason for making the cost of operating the vessel increased. This paper suggests energy-effective cooling system that controls sea water pumps with inverters to reduce energy consumption in vessel by conducting simulation with LabVIEW. Results shows that electric energy consumption of pumps are significantly deceased. If this energy-effective cooling system is applied to other systems which need cooling, it could be useful in reducing electric energy wastage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1401-1417
• /
• 1997

The major objective of this study is to propose an estimation method for the equipment operating cost in the data center outsourcing situation. To accomplish the objective, the fundamental concepts about the outsourcing pricing is first established by analyzing the previous research in this area. Then an actual case of data center outsourcing is evaluated. Based on the conceptual model and the actual case, a new method is proposed. Validity of the proposed method is verified by the quantitative comparison with the previous method. Reasonability and usefulness of the method were evaluated through the customer survey.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.141-141
• /
• 2000

In the recent day, fatigue life prediction techniques play a major role in the design of components in th ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structure of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, multi-axis durability testing simulator is used to car교 out the fatigue test. In this paper, the operation software for simultaneously driving 3-axis simulator is developed and the real-time signals of input-output data are displayed in window of PC. Moreover, the displacements and the loads of 3-axis actuators are calibrated separately and the operating characteristics of the actuators are evaluated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.223-223
• /
• 2000

Embedded system area has brought an innovation and has been spread rapidly by the growth of the Internet, wireless telephony and multimedia recently. Many embedded systems are required to be real-time systems in that it needs multi-tasking and priority based scheduling. This paper introduces a real-time system that was developed with web server ability for control and monitoring system employing a real-time operating system. It discusses the design model, structure, and applications of web server system. We used SNDS100 board which has a 32-bit RISC microcontroller of ARM7TDMI core as a hardware platform. MicroC/OS kernel was used as Real-time operating system that supports a preemptive and multitasking functions. We developed a hierarhchical control and monitoring system that not only reduced system and management costs, but also enhanced reusability and portability.

• International Journal of Reliability and Applications
• /
• v.4 no.2
• /
• pp.79-95
• /
• 2003

Manufacturers collect and analyze field reliability data to enhance the quality and reliability of their products and to improve customer satisfaction. To reduce the data collecting and maintenance costs, the amount of data maintained for evaluating product quality and reliability should be minimized. With this in mind, some industrial companies assemble warranty databases by gathering data from different sources for a particular time period. This “marginal count failure data” does not provide (i) the number of failures by when the product entered service, (ii) the number of failures by product age, or (iii) information about the effects of the operating season or environment. This article describes a method for estimating age-based claim rates from marginal count failure data. It uses covariates to identify variations in claims relative to variables such as manufacturing characteristics, time of manufacture, operating season or environment. A Poisson model is presented, and the method is illustrated using warranty claims data for two electrical products.