• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2008년도 추계 공동 국제학술대회
• /
• pp.629-633
• /
• 2008

Recently, there has been great interest in the application of short-range wireless communication system. In this paper, the miniaturized FM transmitter with low power is developed, and laboratory tests have been carried out. The FM transmitter uses FM radio waves to send sound from any system (MP3, PMP, PDA, MP3 Phone et.) to any nearby radio or stereo system. The transmitter is designed with $2.6cm{\times}2.6cm{\times}2.6cm$ system size. The operating voltage is 3.7 V and used the built-in storage battery. The system can use continuously during 7 hour with once charging. The transmission frequency can select one of 88.1 MHz, 88.3 MHz, or 88.5 MHz in compliance with utility condition. The channel separation ability is 40 dB. The operating temperature is $-10{\sim}+85^{\circ}C$, which use in the industry environment. Consequently, this system sis used conveniently with short distance information transmitter system at the industry field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.184-186
• /
• 2003

Power systems must be operated within limits that will ensure adequate generation and transmission capacity to avoid cascading. In developing a set of operations limits, it is important to do so within a general framework in order to ensure that the operating objectives are met. In the this regard, when the system experiences a generation-load imbalance, the principles of sound operation will be maintained by bringing under control an unscheduled power flow condition as quickly as possible. This paper presents load shedding application which responds both to frequency and to rate of change of frequency. Its application is in the operating situation of load suddenly in excess of generation, either because of generator or other equipment failure. A scheme which is able to utilize rate of change of frequency as well as frequency itself is an improvement over existing scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3181-3183
• /
• 2000

As the fact that the simple data of text and sound in early year have been changed to be high quality images and sounds. PLL(Phase-Locked Loop) system plays an important role in communication system. VCO(Voltage Controlled Oscillator) is the most important part in PLL system because it can have critical effects on operation of PLL. Recently, it has been raised the necessity of high speed and high accuracy circuit application. In this paper, a new differential voltage clamped VCO using negative-skewed path is suggested. Using a dual-delay scheme to implement the VCO, higher operation frequency and wider tuning are achieved simultaneously. The dual-delay scheme means that both the negative skewed delay paths and the normal delay paths exist in the same ring oscillator. The negative skewed delay paths decrease the unit delay time of the ring oscillator below the single inverter delay time. As a result, higher operation frequency can be obtained. The whole characteristics of VCO are simulated by using HSPICE. Simulation results show that the resulting operating frequencies are 50% higher than those obtainable from the conventional approaches.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.104-110
• /
• 2008

최근 생활수준의 향상으로 쾌적한 주거환경에 대한 요구가 증대되어, 변압기 소음으로 인한 민원이 끊임없이 발생하고 있다. 소음민원을 해결하기 위하여 옥내변전소에서는 공명형 소음기, 방음보조셔터 등의 대책을 시행하고 있으나, 주변환경 변화에 따라 소음대책을 재수립하는 경우가 발생한다. 따라서 소음문제를 근본적으로 해결하기 위해서는 변압기의 소음전파를 예측하여, 변전소 경계지역에서 소음규제기준을 만족시키는 변압기 소음레벨을 제시할 필요가 있다. 본 논문에서는 옥내변전소에서 변압기 증설, 주변압기실 셔터의 개방 등의 운전상황에 따른 소음레벨 변화를 예측하고, 옥내변전소 경계지역에서 소음규제기준을 만족시키는 변압기 소음레벨을 제시하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.279-281
• /
• 2003

We analysed the operating properties of resistive type superconducting fault current limiters (SFCLs) based on YBCO thin films with a single line-to-ground fault. When a single line-to-ground fault occurred, the short circuit current of a fault phase increased up to about 6 times of transport currents immediately after the fault instant and was effectively limited to the designed current level within 2 ms by the resistance development of the SFCL. The fault currents of the sound phases almost did not change because of their direct grounding system. The unsymmetrical rates of a fault phase were distributed from 6.4 to 1.4. It was found that the unsymmetrical rates of currents were noticeably improved within one cycle after the fault instant. We calculated the zero phase currents for a single line-to-ground fault using the symmetrical component analysis. The positive sequence resistance was reduced remarkably right after the fault but eventually approached the balanced positive resistance component prior to the system fault. This means that the system reaches almost the three-phase symmetrical state in about 60 ㎳ after the fault. The ground currents were almost 3 times of the zero phase mts since most of the fault currents flowed through the grounding line.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.433-438
• /
• 1999

본 논문은 기계장치에서 발생하는 소음 중 불필요한 소음만을 제거하고 실제로 필요한 소음(경고음 작동음 등)의 정보를 가진 소리는 제거하지 않는 소음 제어 방법을 Active Noise Control(ANC)를 이용하여 구현하였다. 소음원으로는 축류팬(Akial Fan)을 사용하였으며 여기서 발생하는 BPF를 효과적으로 제어할 수 있는 Feedback Active Noise Control 방식을 사용하였으며 적응 알고리즘으로 Filtered-X LMS 알고리즘을 사용하였다. 실험은 두 가지 Case(덕트 내 전파 소음, 외부 자유 음장 방사 소음)로 실행되었다. 제거하고자하는 대상은 BPF 소음이며 이 이외의 주파수에는 영향을 주지 않게 하기 위하여 대역필터를 이용하였다. 또한 실제 인간이 느끼는 소음 감소 효과를 알아보기 위해 Loudness로 제어 전후의 결과를 비교하였다. 실험 결과 BPF만 감소시키고 BPF이외의 주파수에는 영향을 주지 않음을 알 수 있었으며 6.7dB의 Loudness level의 감소 효과를 얻어, 제어하고자 하는 주파수만을 제어하였으며 음압뿐 아니라 인간이 느끼는 소음도에서도 효과적으로 감소할 수 있음을 확인할 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.123-128
• /
• 2002

Over the range(OTR) has been applied for cooking and ventilation functions especially in northern Amarica. Because flow rate and operating rpm of the double sided sirocco fan for ventilation are much higher and than the microwave oven system, the major noise source is the sirocco fm. Recently, the quiet fan development is one of very important issues for amenity. In this study, the noise source identification using multi-microphone array system was carefully carried out and numerical simulations for understanding the aerodynamic and aeroacoustic of the fan were peformed. The sound level of tonal noise is predicted with a good accuracy but that of the broadband shows some discrepancy. In order to reduce the broadband noise, the inlet region of sirocco fan have to be modified that the secondary flow should be suppressed. Based on these results, new low noise fan and OTR is now developing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1-5
• /
• 2007

A majority of piping vibration problems are induced by internal fluid pulsation; turbulent flow, vortex shedding at internal discontinuities, and pressure pulsation at equipment nozzles. The pulsation at the pressure sources resonates acoustically with the piping and the amplified pressure pulsation can generate shell mode vibration in the piping. Reheater attemperator piping supplies water from feedwater pump to reheater attemperator to control the boiler temperature. In normal operating condition, the high frequency shell mode vibration occurred in the piping with the high level of sound(105 ${\sim}$ 117 dB). The vibration sources are pressure pulsation in the pump nozzle and the frequencies are related to the blade passing frequencies. The objects of this paper are to analyze the cause of the high frequency vibration and to establish corrective actions.

• 한국항해학회지
• /
• 제24권3호
• /
• pp.133-140
• /
• 2000

The paper deals with the implementation of prototype Ship Simulator system (VRSS) by Virtual Reality techniques with Head Mounted Display (HMD) device. The prototype VRSS was consists of PC-based human sensors, object oriented operating system. In addition, two kinds of databases arranged from Head Related Transfer Functions and 3D object models were used to create 3D sea sound, and to construct virtual world, respectively. Using the prototype system, we carried out some simulation tests for the overtaking situation to prevent collisions at sea, and discussed on the usability of the system. As results from simulations, the prototype VRSS can provide multisensory and interactive display environment. The results gave rise to the user interaction with 3D objects that give realistic reproduction of navigational environments under a given scenario. Thus, we found that the prototype VRSS should be one of the next-generation ship simulation system.

• 소음진동
• /
• 제6권6호
• /
• pp.709-715
• /
• 1996

In recent years, the piping vibration in many Power Plants is being increased by the aged generating facilities due to a long time use. Generally, the pressure fluctuations associated with the flow-induced excitations in this case are broadband in nature. Mainly, the dominant sources of vibration are a vortex-shedding, plane waves and boundary layer turbulence. The peak level of the spectrum is proportional to the dynamic head. A severe disturbance in pipeline results in the generation of intense broadband internal sound waves which can propagate through the piping system. The characteristic frequencies of operating loads of 20%, 57%, 70%, 100% are 4 - 6 Hz and coincide with the results from impact hammering test and FEM analysis. We chose the wire energy absorbing rope restraint as a vibration reduction method after reviewing the various conditions such as site, installing space and economic cost etc. After installation, the vibration level was reduced about 54% in velocity.