• KSBB Journal
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2008

To obtain maximal efficacy with minimal systemic side-effects, many studies have been carried out to achieve the controlled release of 5-fluorouracil (5-FU). In this study, biodegradable poly(L-lactide) (L-PLA) microparticles containing 5-FU were prepared by a process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide. The effects of various organic solvents, drug/polymer feeding ratio, polymer molecular weight, and blending with the same polymers with different molecular weights on the formation of 5-FU loaded microparticles were investigated under a predetermined operating condition from our previous study. The drug recovery, entrapment efficiency, and in vitro drug release kinetics were determined by HPLC assays. The drug recovery obtained from the ASES process was found to be very high, whereas the drug entrapment efficiency was considerably low in all the experiments due to the poor affinity between L-PLA and 5-FU. These results indicated that the precipitation rate of L-PLA might be quite different from that of 5-FU so that there was little chance to form 5-FU loaded L-PLA microparticles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.35-49
• /
• 2019

Currently in 2018, Korea has over 600 operating sewage disposal facilities. The law requires a sewage treatment plant to treat 500 tons or more of water per day, and a small-decentralized sewage treatment facility in a community to treat 50 tons or more to less than 500 tons of water per day. However, most facilities fulfill neither the quantity nor the quality requirements from the original design for such reasons as inflow of rainwater and ground water due to deterioration of pipelines and unauthorized input of wastewater in the pipelines. The research has selected 2 representative cases among the technical diagnosif sewage pipelines in many regions within the country to use it as the baseline of: hourly flowrate and BOD water quality analysis in both clear and rainy days, proper plant operation through inflow rate and ratio calculation, and diagnostic evaluation for deterioration of the pipelines and their accessary structures. This also suggests facilities that treats 500 tons or more of inflow per day to sample and analyze the water hourly for 24 hours once a week in both clear weather and rainy weather considering the influence of rainfall on a regular basis.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.869-876
• /
• 1996

Purification of 2,6-dimethylnaphthalene(2,6-DMNA) from the distillate containing a mixture of dimethylnaphthalene(DMNA) isomers of very high concentration was investigated by crystallization-recrystallization combination as a after-treatment for separation and purification of 2,6-DMNA in the light cycle oil(LCO). The separation of individual isomers of DMNA was studied by crystallization with the distillate as a feed. 2,6-DMNA, 2,7-dimethylnaphthalene(2,7-DMNA) and 2,3-dimethylnaphthalene(2,3-DMNA) were concentrated to crystal, and it was fould that separation between a group of 2,6-, 2,7-, 2,3-DMNA isomers and a group of the other DMNA isomers was possible. However, it was not possible to separate 2,6-, 2,7- and 2,3-DMNA from one another. To select the most suitable recrystallization solvent for purification of 2,6-DMNA, several conventional solvents, which have been employed commercially as recrystallization solvents for high purity performance, were tested, through measurement of solubility of 2,6- and 2,7-DMNA. The solvent used were hexane, iso-propyl ether, ethyl acetate and ethanol. From the solubility results for 2,6- and 2,7-DMNA, ethanol seemed to be the most suitable solvent for purification of 2,6-DMNA. Finally, with crystal recovered by crystallization as a feed and ethanol as a solvent, recrystallization experiments were conducted under various conditions. Purification of 2,6-DMNA was easily done with increasing operating temperature and solvent to feed ratio. These results show that the crystallization-recrystallization combination is an effective one for separation of individual isomers of DMNA.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.31-36
• /
• 2018

The purpose of this study is to investigate the changes of sludge characteristics according to the changes of influent sewage flowrate in the advanced wastewater treatment processes including MBR, SBR, and $A_2O$. The ratio of the actual sewage flowrate to the design flowrate is decreased from 100% to 70, 40%, and 10%, and the specific denitrification rate and ammonia oxidation (nitrification) rate was measured. The specific nitrification rate of the sludge collected from the aeration tank of each process was measured at a similar value ($0.10gNH_4/gMLVSS/day$) in all three process under the condition of 100% of sewage flowrate. It has tended to decrease significantly as the sewage flowrate decreased from 70% to 40%. The specific denitrification rate was also decreased by ~50% as the sewage flowrate decreased. However, considering the total nitrogen concentration in the influent and the microbial concentration in the reactor, the changes in kinetic parameter did not affect overall nitrogen removal. Therefore, it can be concluded that stable nitrogen removal will be possible under low influent flowrate condition if the MLVSS concentration is kept high.

• The Korean Society of Law and Medicine
• /
• v.11 no.2
• /
• pp.239-274
• /
• 2010

Advance directive refers to a description of the treatment method a patient wants to be provided with in case where the person is unconscious or lacks an ability to decision making in a future period or a declaration of intention that delegates and appoints another person who makes a decision regarding a treatment method on behalf of the person. Advance directive is usually a document form, but oral statement is acceptable as well. Advance directive may have a variety of forms though, it basically consists of two basic forms. That is, one is a living will, and the other is a surrogate decision making. Though the importance of advance directive has been emphasized, and the necessity of adopting the system has been strongly argued for so far, the debates on criteria, method, and procedure alike have not yet reached an agreement. It is because even the concept of advance directive is more or less ambiguous, and each specific method has its own theoretical limitations and practical constraints. Thus the inquiries on advance directive raised in the study are summarized as the meaning, practicability, and philosophical foundation of the advance directive. Firstly, the theoretical limitations of Advance directive may be categorized into conceptual and moral limitations. In case of conceptual limitations, authors of advance directives may not be well aware, in advance, of the particular situation in which he or her will experience in the future, and patients may experience the change in his or her values and lack the understanding and information about the future situation due to the changes in treatment methods. In case of moral limitations, a patient has a limited moral autonomy right and self identity that have an impact on his or her preference. Secondly, in case of practical constraints for advance directive, there exist cultural features, low ratio of documentation, as patients themselves admit, and low predictability and stability of patient's own preference regarding life-sustaining care. And the problem of validity and accuracy in proxy's decision making is also raised. Those who administer a living will, especially, may have a difficulty in understanding the directive by a patient, so that the accuracy of execution cannot be secured. In the sense, it is needed to implement a legal device in order to solve such problems. In summary, it is urgently required to understand the limitations and explore desired alternatives to overcome the relevant problems in advance, which must contribute to successfully adopting and effectively operating the advance directive system in Korea.

• Journal of Chest Surgery
• /
• v.24 no.2
• /
• pp.123-134
• /
• 1991

Twenty eight patients had undergone repair of an isolated complete atrioventricular septal defect between April 1986 and September 1990 in Seoul National University Children`s Hospital. The group comprised 13 male and 15 female patients. They ranged in age from 2 months to 8 years[mean 18.6months] and in weight from 3. 4kg to 23kg[mean 9.0$\pm$4.6kg]. They were analysed as Rastelli type A in 17 patients, Rastelli type B in 2 patients, and Rastelli type C in 9 patients. Seven patients had concomitant Down`s syndrome. All patients had large left-to-right shunt[mean pulmonary to systemic flow ratio 3.5 $\pm$2.2 ranging from 0.68 to 10.0] and high pulmonary systolic pressure[mean 74$\pm$18.8mmHg, ranging from 35 to 110]. In 11 patients, one patch technique was used to close the atrial and ventricular septal defect and 16 patients were undergone by two patch technique. We urgently managed only one patient by pulmonary artery banding whose anatomy was Rastelli type C and severe mitral regurgitation was identified. Postoperative complete A - V block was noted in 3 patients, two of whom were dead in operating room due to combined LVOTO and myocardial failure, and one patient with Rastelli type C was undergone by VVI type permanent pacemaker insertion 1wk later after two patch technique, but we had to manage him by modified Konno operation and total correction due to LVOTO and VSD leakage and severe mitral regurgitation 3 years later. Another two reoperation cases due to severe mitral regurgitation after two patch technique were undergone, one of whom we managed by mitral annuloplasty 3 months later but aggravated mitral regurgitation made us to control him by MVR 3 months later. Another one case of VSD leakage and tricuspid regurgitation was managed by total correction but she died of respiratory insufficiency 14 days later. We experienced pulmonary hypertensive crisis in 3 patients, who were dead in two cases comparing with one control case. So operative mortality is 9/27[33.6%], in one patch group of 3/11[29.2%] comparing with two patch group of 6/16[37.5%]. In summary, causes of death were pump weaning failure, myocardial failure and low cardiac output syndrome and pulmonary hypertensive crisis, resp. failure, complete AV block. Mean follow up period is 15.8$\pm$10.7 months[ranging from 3months to 37 months]

• Journal of Chest Surgery
• /
• v.20 no.1
• /
• pp.30-38
• /
• 1987

Sixty-eight consecutive patients have been subjected to total corrective surgery of tetralogy of Fallot at the Hanyang University Hospital between August 1975 and December 1984. Of these, the pressure of chambers and great arteries were measured, before and immediately following an operation in 39 of the survived group and 11 of the expired group. The values of postoperative peak pressure were correlated with the outcome of the operation. The result are as followings; 1] Compared to the average peak pressure of right atrium in the survived group, 14.46*4.16 mmHg, that in the expired group, 19.36*8.19 mmHg, was significantly lower, 2] Compared to the average systolic pressure of right ventricle in the survived group, 56.72z16.37 mmHg, that in the expired group, 70.45*15.26 mmHg, was significantly lower. 3] Compared to the average systolic pressure of pulmonary artery in the survived group, 33.26*12.95 mmHg, that in the expired group, 37.55*11.63 mmHg, was higher. But the difference was not significant. 4] Compared to the average peak pressure of left atrium in the survived group, 17.41*6.90 mmHg, that in the expired group, 31.18*12.47 mmHg, was significantly higher. 5] Compared to the average systolic pressure of left ventricle in the survived group, 103.82~12.83 mmHg, that in the expired group, 90.55*20.02 mmHg, was significantly lower. 6] Compared to the average value of the right ventricle-pulmonary artery systolic pressure gradient [RV-PA] in the survived group, 24.95a15.44 mmHg, that in the expired group, 35.09*17.01 mmHg, was significantly higher. 7] Compared to the average value of the right ventricle to left ventricle systolic pressure ratio [RV/LV] in the survived group, 0.55*0.15, that in the expired group, 0.80a0.20, was significantly higher. 8] Compared to the average value of the pulmonary artery-left atrium peak pressure gradient [PA-LA] in 15.85x12.29 mmHg that in the expired group, 4.18x6.00 mmHg, was significantly lower. It is, therefore, suggested that in the operating room, PA-LA is as valuable as RV - PA, RV/LV in making important surgical decision and predicting the prognosis.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.847-851
• /
• 2008

The handling and processing of agricultural products in Korea is done manually. Small plastic boxes, nets, and corrugated cardboard boxes are used as containers during harvesting, sorting and other product handling operations. However, these practices are labor-intensive, time-consuming, require various kinds of packing materials, and are expensive because of high operating costs. To overcome these problems, the use of pallet bins with pre-cooling and storage features for handling and processing bulk farm products was investigated. The airflow resistances through bulk potato, onion and mandarin stocks were measured, and the pallet bins and a pressure pre-cooling device were manufactured. The opening ratio, bed depth and airflow rate through bulk potato, onion and mandarin in the pallet bin were defined with regression equations. The cooling rates of bulk potato, onion and mandarin were 0.8C/h ($21.7{\rightarrow}0C$, 14.5 h), 0.4C/h ($15.4{\rightarrow}.0C$, 32.2 h) and 0.7C/h ($13.7{\rightarrow}C$, 18.8 h), respectively, with the pressure pre-cooling system. Temperature deviances for storage of bulk potato, onion and mandarin were 0.12C, 0.12C and 0.17C, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.833-842
• /
• 2020

The purpose of this study is to analyze the economic feasibility of technology developed by the National Institute of Animal Science used to shorten the raising term of Hanwoo cattle. This technology can address the increasing proportion of feed cost to operating expenses in the industry. The technology maintains quality by high nutrition breeding during the growing period while shortening the fattening period compared to conventional methods for castrated cattle. Our analysis employs the partial budget method, and results are as follows. First, we found that the ratio of shipment in age of less than 29 months has been increasing. Second, the statistical test finds that both the reduction in age of the months for shipment and the increase in dressed weight annually are significant. Third, the benefit of introducing the technology with the self-manufactured TMR accounts for 467,990 won per head/time. This result is strong evidence for prioritizing and extending pilot projects. In order to further expand this technology in the future, problems, limitations, and obstacles to introduction should be additionally disclosed for participating and non-participating farms after conducting the pilot project.