• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.235-241
• /
• 2012

The efficiency tests of automatic positioning transmitter (APT) using satellite on life jacket were carried out to minimize casualties of fishermen and to make system optimization for effective SAR (Search and Rescue) operation. As the result of the tests, average position was equaled on the comparison between SPOT using low earth orbit satellite and DGPS (Differential Global Positining System), but standard deviation of DGPS for latitude and longitude were 66.4% and 46.3% smaller than those of SPOT. The position precision of SPOT was almost two times lower than LGT using geostationary satellite to compare 95% circular error probability. However, the success rate of receiver for SPOT was revealed as 86.5~94.1% on the experiments in the South Sea and the West Sea and it was 4.5 times higher than LGT. Therefore, SPOT is expected to contribute greatly to the rapid rescue of victim.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.603-610
• /
• 2001

Industrial processes are normally operated by skilled humans who have the cumulative and logical information about the system. Fuzzy control has been investigated for many application. Intelligent control approaches based on fuzzy logic have a chance to include human thinking. This paper represents modeling approach based upon operators knowledge without mathematical model of the system and optimize the controller. The experimented system is constructed for sending a ball to the goal position using wind of two DC motors in the predefined path. A vision camera to mimic human eyes detects the ball position. The system used in this experiment could be hardly modeled by mathematical methods and ould not be easily controlled by conventional manners. The controller is designed based on the input-output data and experimental knowledge obtained by trials, and optimized under the predefined performance criterion. And this paper shows the data adaptation for changeable operating condition. When the system is driven in the abnormal condition with unconsidered noise, the new optimal operating parameters could be defined by adjusting membership functions. Thus, this technique could be applied in industrial fields.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.162-167
• /
• 2005

The purpose of this paper is to improve the hysteresis characteristics of a stack type piezoelectric actuator using system identification and tracking control. Recently, several printing methods that are cost less and faster than previous semiconductor processes have been developed for the production of electric paper and RFID(Radio Frequency IDentification). The system proposed in this study prints by spraying the molten metal. And this system consist of a nozzle, heating furnace, operating actuator and an XYZ 3-axis stage. As an operating system, the piezoelectric(PZT) actuator is a very useful tool for position control of the metal printing system. However, the PZT actuator has a hysteresis nonlinearity due to the ferroelectric characteristics of the PZT element. This hysteresis causes problem position control characteristics in the system and deteriorates the performance of the system. In this study, an investigation was conducted to improve the hysteresis characteristics of the PZT actuator that has an output displacement for the input voltage. In order to reduce the hysteresis nonlinearity of the PZT actuator, this proposed a inverse hysteresis model and a mathematic modeling method that can express the geometric relationship between voltage and displacement. In addition, system identification and PID control methods were examined. Also, it was confirmed that the proposed control strategy gives good tracking performance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.679-687
• /
• 2019

This paper presents the autonomous swimming technology developed for an Autonomous Underwater Vehicle (AUV) operating in the underwater jacket structure environment. To prevent the position divergence of the inertial navigation system constructed for the primary navigation solution for the vehicle, we've developed kinds of marker-recognition based underwater localization methods using both of optical and acoustic cameras. However, these two methods all require the artificial markers to be located near to the cameras mounted on the vehicle. Therefore, in the case of the vehicle far away from the structure where the markers are usually mounted on, we may need alternative position-aiding solution to guarantee the navigation accuracy. For this purpose, we develop a sonar image processing based underwater localization method using a Forward Looking Sonar (FLS) mounted in front of the vehicle. The primary purpose of this FLS is to detect the obstacles in front of the vehicle. According to the detected obstacle(s), we apply an Occupancy Grid Map (OGM) based path planning algorithm to derive an obstacle collision-free reference path. Experimental studies are carried out in the water tank and also in the Pohang Yeongilman port sea environment to demonstrate the effectiveness of the proposed autonomous swimming technology.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2325-2327
• /
• 2003

This thesis is concerned with the control of Arago's disk system using CAN(Controller Area Network). CAN protocol is used widely for the real time control in networked control systems(NCS). A networked control system using CAN is constructed to perform position control of Arago's disk. The mathematical model, of overall system is derived to design an appropriate controller analytical1y. Various operating points of the Arago's disk system in the real time control are chosen as stable region ($45^{\circ}$), marginal1y stable region($90^{\circ}$) and unstable region($120^{\circ}$), and the experiment for the position control of arago's disk system is done for each operating point. The performance of the suggested NCS is verified by experiments. It is shown that the NCS using CAN has stability and excel1ency in real time control.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.261-265
• /
• 2019

We analyze the failure rate change of a conventional bidirectional converter and a modified one which moves an output capacitor towards propulsion battery. We analysis of the circuit structural homogeneity and the difference between both converters, and confirm that the capacitor working voltage is reduced by changing the capacitor position. After obtaining the capacitor failure rate according to voltage stress factor and operating temperature, it is applied to the fault-tree of the bidirectional converter to obtain the overall failure rate of the converter. We analyzes the advantages and disadvantages of design changes by comparing and analyzing the failure rate and mean time between failures (MTBF) according to operating temperature and capacitance value.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.527-538
• /
• 2021

The purpose of the study is to determine the efficiency, position, and partner selection of securities companies via the negative super-SBM model used in data envelopment analysis (DEA). This model utilizes a variety of inputs, including current assets, non-current assets, fixed assets, liabilities, owner's equity and charter capital, and outputs including net revenue, gross profit, operating profit, and net profit after tax collected from the financial reports (Vietstock, 2020) of 32 securities companies, operating during the period from 2016 to 2019, negative data are collected as well. Empirical results determined both efficient and inefficient terms, and then further determined the position of each securities firm under consideration of every term. The overall score arrived at discovered a large performance change realizing a maximum score able to reach 20.791. In the next stage, alliancing inefficient companies was carried out based on the 2019 scores to seek out optimal partners for the inefficient companies. The tested result indicated that AAS was the best partner selection when its partners received a good result after alliancing, as with FTS (11.04469). The partner selection is deemed as a solution helpful to inefficient securities companies in order to improve their future efficiency scores.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1118-1128
• /
• 2015

In the midst of the advancement of global economic trade restrictions, the internationalization of domestic agriculture, which has occurred at a time of crisis in the industry, has presented an opportunity for Korea's agricultural products to be exported overseas. In particular, from 2015, after favorable outlooks for Korean rice, it is expected that the domestic agricultural industry is in a strong position to play a major role in export markets. Due to this, among existing measures targeting the import of rice, increasing domestic measures to boost rice exports and establish an effective operating plan are being pursued. However, until now, appropriate measures targeting domestic rice markets have not been found. In addition, domestic grain piers, which are currently used exclusively for the import of grain, do not have sufficient capacity to handle export operations. Therefore this paper will examine the current status of domestic grain piers, and will suggest a operating plan in grain terminal for the export of grain in order to successfully bring domestically produced rice to foreign markets. The conclusions drawn from this paper are designed to be used as a basic application for the operational plan of grain piers for the purpose of increasing domestic rice exports.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.49-60
• /
• 2021

The Core Protection Calculator System (CPCS) is vital for plant safety as it ensures the required Specified Acceptance Fuel Design Limit (SAFDL) are not exceeded. The CPCS generates trip signals when Departure from Nucleate Boiling Ratio (DNBR) and Local Power Density (LPD) exceeds their predetermined setpoints. These setpoints are established based on the operating margin from the analysis that produces the SAFDL values. The goal of this research is to create a simplified CPCS that optimizes operating margin for I-SMRs. Because the I-SMR is compact in design, instrumentation placement is a challenge, as it is with Ex-core detectors and RCP instrumentation. The proposed CPCS addresses the issue of power flux measurement with In-Core Instrumentation (ICI), while flow measurement is handled with differential pressure transmitters between Steam Generators (SG). Simplification of CPCS is based on a Look-Up-Table (LUT) for determining the CEA groups' position. However, simplification brings approximations that result in a loss of operational margin, which necessitates compensation. Appropriate compensation is performed based on the result of analysis. FPGAs (Field Programmable Gate Arrays) are presented as a way to compensate for the inadequacies of current systems by providing faster execution speeds and a lower Common Cause Failure rate (CCF).

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.435-448
• /
• 2013

The aim of this study is to investigate and develop the extended models for Economic Cash Amount(ECA), Cash Break Even-Point(BEP), and Cash Flow Statement(CFS) by referencing systematic literature review in the field. The study develops three extended models to determine the optimal cash amount: ECA model with interest opportunity cost, financing transaction cost and financing fail cost, ECA model with daily cash supply and interest opportunity cost, ECA model with financing fail cost and interest opportunity cost. Earnings Before Interests, Tax, Depreciation and Amortization(EBITDA) is obtained by subtracting noncash depreciation costs from Earning Before Interest and Tax(EBIT), which is efficient metric to evaluate operating cash flow. The research also develops two extended Cash BEP models, considered as interest and corporate tax, in order to indentify the break-even point as EBITDA equals zero. Furthermore, this paper proposes the modified version of CFS by introducing the reclassification of operating and financing accounts in the statement of financial position. In addition, the study also present the reclassification of five types of profit, such as gross profit, EBIT, ordinary profit, special profit, and net profit within the statement of comprehensive income. In order to provide a better understanding of the proposed cash flow models, numerical examples, such as two-sample t test and Analysis of Variance(ANOVA), are presented to demonstrate the statistical significance according to the industrial types for net working capital(i.e cash-to-cash), net profit, operating cash flow and free cash flow.