• 자원ㆍ환경경제연구
• /
• 제30권1호
• /
• pp.107-128
• /
• 2021

우리나라 전력시장에서 한계비용 기반의 가격결정메커니즘에 관한 논의가 이루어질 때 마다 한계발전기의 수익 감소는 가장 큰 장애물로 인식되었다. 하지만 수익감소는 한계비용 기반의 가격결정메커니즘의 한계점이 아니라 시장개설 초기 CBP체제의 단기 운영 계획, 발전계획프로그램의 기능 부재, 성능시험의 구조적 결함이 결합된 문제이다. 다조합 복합발전기에 운전조합별 비용함수를 적용할 경우 고출력구간에서 한계비용이 평균비용을 초과할 수 있으며, 이것은 비용함수를 산정하는 방식에 따라 가격결정메커니즘 제도개선을 가로막았던 구조적인 장애물을 극복할 수 있는 기회를 제공할 수 있다. 실시간 시장, 계통운영보조서비스 시장 등 재생에너지 확대를 수용하기 위한 전력시장 개선 및 DR, ESS 등 새로운 자원들의 시장참여 확대 등 향후 전력시장의 복잡성은 더욱 증가할 것으로 전망된다. 전력시장이 복잡해질수록 합리적인 가격신호를 제공하는 것이 바로 전력시장의 가장 중요한 역할이며 한계비용 기반의 가격결정메커니즘이 바로 전력시장 선진화의 출발점이 될 것이다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.477-481
• /
• 2007

In this article we present a new, reference model based, unified strategy for engine control. Three main modes are considered: first is the driver control mode where the driver controls the engine via the pedal position; second is the dashpot mode, that is, when the driver takes his foot off the pedal; and, lastly is the idle speed control mode. These modes are unified so that seamless transitions between modes now becomes possible. The unification is achieved due to the introduction of a reference model for the engine speed whereby only the desired engine speed is different for different modes while the structure of the control system remains the same for all the modes. The scheme includes an observer that estimates unknown engine load torque. A proof of robustness with respect to unknown load disturbances both within the operating modes and during intermode transitions is given.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.991-996
• /
• 2010

본 논문에서는 IEEE 1284 동작 모드를 사용하는 병렬 I/O 제어 시스템을 제안하고 인터넷 환경하에서 원격제어 통신을 실현하였다. IEEE 1284 표준은 다수의 특정한 동작 모드와 호환성이 있는 인터페이스를 정의하며 PC의 병렬 포트에 대해 보다 개선된 성능을 제공한다. 병렬 포트 장치는 Device/ID 식별 절차를 갖는 병렬 포트에 대해 PnP 기능을 제공하게 되는 새로운 운영체제 때문에 시스템 구성과 인터페이스 절차가 간단하게 된다. 이러한 성능 증대로 병렬 I/O 포트는 더욱 저가격, 실용이 간편한 I/O 포트로 가능하게 된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.267-271
• /
• 1990

This paper describes a 3-Phase Quasi-Resonant DC Link Inverter (3-phase QRI), which has two operating modes, ie. inverting mode and rectifying mode. First the 3-Phase QRI is simplified and the resonant circuit is analyzed in comparison with two resonant DC-to-DC converters. This analysis shows that the maximum voltage of resonant capacitor is limited to twice the input voltage irrespective of operating modes. A new simple control method in rectifying mode is suggested, which does not require any other element in power circuit. The characteristic of 3-Phase Quasi Resonant Inverter has been verified by simulation using the proposed control method.

• International Journal of Automotive Technology
• /
• 제2권4호
• /
• pp.147-155
• /
• 2001

Analysis of the thermodynamic cycle of IC engine from the point of view of economy and emissions was carried out. From this analysis potential capability of engine development was derived. This potential capability is lean-burn engine, fuelled with homogeneous mixture with $\lambda \geq$ 1.4. Several different modes of fuelling were proposed and tested on one-cylinder test engine from the point of view of extending lean operating limit of the engine, emissions and fuel economy. Among them were: fuelling with evaporated preheated gasoline, with gas (LPG evaporated) and with liquid butane. From these modes, fuelling with liquid butane injected to inlet port was selected and finally tested. This novel system of fuelling offered better than standard engine performances and emissions at lean operating limit. These results were validated on full-scale two-cylinder engine.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.40-48
• /
• 2019

Hybrid electric propulsion systems (H-EPSs) are an intermediate step for integrated full electric propulsion warships. H-EPSs are a dynamic combination of mechanical and electrical propulsion systems to achieve the required mission performances. The system modes could adapt to meet the requirement of the various operation conditions of a warship. This paper presents a configuration and operating modes of H-EPSs considering the operation conditions of a destroyer class warship. The system has three propulsion modes, namely, motoring mode, generating mode [power take off (PTO) mode], and mechanical mode. The PTO mode requires a careful fuel efficiency analysis because the fuel consumption rate of propulsion engines may be low compared with the generator's engines depending on the loading power. Therefore, the calculation of fuel consumption according to the operating modes is performed in this study. Although the economics of the PTO mode depends on system cases, it has an advantage in that it ensures the reliability of electric power in case of blackout or minimum generator operation.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.86-93
• /
• 2018

In this work, control methods and operating modes are proposed to manage standalone microgrid. A standalone microgrid generally consists of two sources, namely, battery energy storage system (BESS) and diesel generator (DG). BESS is the main source that supplies active and reactive power regardless of load conditions, whereas DG functions as an auxiliary power source. BESS operates in a constant voltage constant frequency (CVCF) control, which includes proportional-integral + resonant controller in a parallel structure. In CVCF control, the concept of fundamental positive and negative transformation is utilized to generate a three-phase sinusoidal voltage under imbalanced load condition. Operation modes of a standalone microgrid are divided into three modes, namely, normal, charge, and manual modes. To verify the standalone microgrid along with the proposed control methods, a demonstration site is constructed, which contains 115 kWh lead-acid battery bank, 50 kVA three-phase DC - AC inverter, and 50 kVA DG and controllable loads. In the CVCF control, the total harmonic distortion of output voltage is improved to 1.1% under imbalanced load. This work verifies that the standalone microgrid provides high-quality voltage, and three operation modes are performed from the experimental results.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.358-364
• /
• 2018

In this study, the theoretical methodology is presented for estimating cost function based on operating modes for Combined Cycle Power Plant. The proposed method has estimated cost functions using the relationship between the gas turbine heat input and the output ratio of the steam turbine. In order to verify the proposed method, a regression analysis was performed using the single cost function estimated by the existing performance test method and the cost function for each operating mode estimated by the proposed method. The results of case studies using the 2016 generator input and output data are presented to show the effectiveness of the proposed method.

• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.63-69
• /
• 1998

회전축계가 거동시 지진하중을 받을때의 응답 거동을 조사하였다. 지진과 기동으로 인하여 회전축계가 불안정하다면, 과다한 진동이 발생할 뿐만 이니라 회정지계의 회전자가 고정자와 부딪혀 기계 성능을 발휘하지 못하게 할 것이다. 그래서 면진장치를 갖춘 기초에 지진동이 작용할 때에, 회전축계의 응답을 모사하였다. 거동시 회전축계의 과도 응답을 얻기 위하여 우선 회전축계의 운동방정식을 유도 하였다. 유도한 운동방정식은 비선형이어서 Runge-Kutta 수치해석법을 이용하여 응답을 계산하였으며, 기동 운전모드에 따른 거동뿐만 아니라 면진스프링의 강성을 매개변수로 취하여 회전축계의 응답거동을 고찰하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.162-163
• /
• 2023

As the development of the 4^th industiral revolution in the maritime industry has progressed, the technical development of autonomous ships, and the development of international regulations have been accelerated. In particular, the IMO Maritime Safety Committee(MSC) has established a road-map for the development of the non-mandatory goal-based MASS instrument(MASS Code) and started developing a non-mandatory MASS Code at MSC 105^th meeting. Many countries are actively participating in the Correspondence Group on the development of MASS Code, and the development of detailed requirements for MASS functions in the MASS Code is underway. Especially, the concept of "Mode of Operation" for MASS functions was mentioned in the Correspondence Group for the first time, and it is expected that discussions on these modes will be conducted from the IMO MASS JWG meeting to held in April 2023. The concept of "Mode of Operation" will be useful in explaining MASS and MASS functions and will be discussed in the future for the development of MASS Code. This paper reviews the contents of the IMCA M 220 document, which provides guidelines on operating modes, to conduct research on the benchmark for setting the operating modes of MASS.