• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.2
• /
• pp.211-222
• /
• 2007

This paper aims to evaluate the new regional development policy which is entirely focused on the lagging rural regions in Korea. The new regional development, called the shin-hwal-ryuk policy is to reflect the radical change in the idea and philosophy of rural development. Although traditional rural development policies were top-down-based and physical infrastructure-centered, the new rural development policy idea is based on bottom-up and soft infrastructure which is related to the promotion of regional innovation capacities. However, it is revealed that the new rural policy involves a variety of problems in the process of establishing and making progress the policy plan in a local level. In the operating process of the policy plan, the central government has shown too quick-tempered for achieving visible outcomes, while many of local government suffer from the lacks of professional capabilities to carry out the plan. I see that as a result of the mixture of these problems the new policy is regarded as 'passively localized process' by the central government rather than 'actively localizing process' by the region for building regional innovation capacity.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.49-55
• /
• 1997

This study was carried out to investigate radiographical and operating conditions of X-ray units and exposure doses to patients during chest radiography, so that the results could provide basic data used for reducing the exposure dose and for providing the diagnostic information with better quality. The conditions and exposure doses of 100 X-ray units mainly used for chest radiography were examined and also 100 radiological technologists mainly handling those apparatus at 76 medical facilities in Pusan were surveyed using a questionnaire from October 1 to December 31 in 1995. The following results were obtained from the study : 1. It was found that most units were capable of taking a high tube voltage radiography by showing 67% of the units equipped with the maximum tube voltage of 150 kV, 94% with more than 500 mA for the rating capacity and 85% with the full wave type of a signal phase. 2. For actual chest radiographical conditions, however, 80% of the units were operated at $60{\sim}100\;kVp$ and only 14% at 100 kVp and over for the high tube voltage. 3. The average exposure time was less than 0.1 second, and eighty four percent of the units adapted the X-ray tube currents ranging from 200 to 300 mA, 80% the focus-film distances between 180 and 210 cm, and 63% the focus sizes of more than 2.0 mm. 4. Most units(98%) employed additional filters made of aluminum, 75% the thickness of filters less than 2.0 mm, and only 2 units the compound filters. 5. Ortho chromatic system was only adopted in 13% of screen film system for the units, and 73% used the grid ratio at 8 : 1 for the low tube voltage during chest radiography. 6. The average exposure dose of all X-ray units during chest radiography was $371\;{\mu}Sv$ with a difference of about 16 times between the minimum to the maximum, and $386\;{\mu}Sv$ both at hospitals and at health centers, followed by $380\;{\mu}Sv$ at general hospitals and $263\;{\mu}Sv$ at university hospitals without showing any statistically significant differences. In conclusion, since patients during chest radiography at medical facilities in Pusan exposed to high levels of radiation, it is recommended that appropriate added filters and grids necessary for the high tube voltage radiography and high-speed screen systems should be adopted and used as soon as possible in order to reduce exposure dose to the patients.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.85-95
• /
• 2009

Congestion on expressways is increasing in spite of continuous road construction. In enlargement of expressway capacity to lessen congestion, a long period is needed and in the case of traffic congestion, it would be impossible to avoid long periods of traffic congestion. So, it is necessary to cope with traffic congestion through continuous traffic condition monitoring, analysis of the causes of congestion and the development of alternatives before traffic conditions worsen. A congestion index that can express traffic operating conditions measurably is needed to monitor those conditions. Thus, in this research, a new congestion index, the Traffic Condition Index (TCI), is developed. TCI is able to evaluate roads that have different grades (or design speeds) and to judge traffic condition as good, fair and poor (congested). In addition, TCI has merits in that it can strengthen the function of existing Freeway Traffic Management Systems (FTMS) and can be applied to congestion management easily: TCI calculates congestion intensity and severity using data obtained from existing FTMS. In order to validate TCI, it was applied to the Kyungbu Expressway and the Seohaean Expressway. As a result, TCI shows a good performance in the aspect of applicability and ability of presentation of traffic conditions compared with travel speed and Travel Time Index (TTI).

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.474-487
• /
• 2009

The principal objectives of this study were to evaluate the space, equipment, and institution rate by functional area, and to suggest appropriate types, numbers, and equipment capacity by school foodservice size for optimal employee job performance and efficiency. Data were collected and administered by 263 dietitians who attended elementary and middle schools in Gyeonggi Province, and the data were analyzed using SPSS statistical software. Among a total of 72 respondents who provided usable data, 31 (48.6%) respondents were nutrition teachers and 37 (51.4%) were part-time dietitians. The majority of the respondents reported that their foodservices were self-operating types (94.4%), and 8 meals out of 10 meals provided over a 2-week period were served as normal meals, defined as meals consisting of Bab, Kook, Kimchi, and 3 side dishes (73.6%). The mean kitchen space was $186.25\;m^2$ for 500 meals/day, $269.7\;m^2$ for 501 to 1,000 meals/day, $249.1\;m^2$ for 1001 to 1500 meals/day, and $274.87\;m^2$ for 1,500 or more meals/day. The mean space of functional areas was $11.52\;m^2$ for office, $12.63\;m^2$ for storeroom, $9.55\;m^2$ for receiving area, $27.23\;m^2$ for pre-preparation area, $149.9\;m^2$ for cooking area, $18.33\;m^2$ for assembly/service area, $45.50\;m^2$ for dishwashing area, and $17.20\;m^2$ for locker room. Only two pre-preparation and cooking spaces increased significantly with increasing size of school foodservice (p<0.05). Office, cooking area, and locker room were allocated in all foodservices. However, the pre-preparation area (68.7%), receiving area (56.5%), assembly/service area (38.1%), and dishwashing area (37.7%) were lowly installed in the surveyed facilities. Through a focus group meeting discussing the results of this study, appropriate equipment and its dimensions were suggested according to functional areas and foodservice scales. Future studies will be necessary to allocate the appropriate space by functional area with the proposed equipment requirements for optimally efficient decision making in equipment purchasing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.649-653
• /
• 1999

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids (SS) from aquacultural recirculating water, In this study, the effects of operating variables on the characteristics of SS removal were investigated through the test runs using magnetite of 2 $\mu$m mean diameter as magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency as well as the capacity of the equipment. In addition, the SS removal efficiency decreased with an increase in the superficial liquid velocity, but the effect became negligible when the mass ratio of magnetite to the suspended solids was higher than 1.0.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.2
• /
• pp.72-82
• /
• 2021

Purpose: A high anion gap (AG) is known to be a significant risk factor for serious acid-base imbalances and death in acute poisoning cases. The strong ion difference (SID), or strong ion gap (SIG), has recently been used to predict in-hospital mortality or acute kidney injury (AKI) in patients with systemic inflammatory response syndrome. This study presents a comprehensive acid-base analysis in order to identify the predictive value of the SIG for disease severity in severe poisoning. Methods: A cross-sectional observational study was conducted on acute poisoning patients treated in the emergency intensive care unit (ICU) between December 2015 and November 2020. Initial serum electrolytes, base deficit (BD), AG, SIG, and laboratory parameters were concurrently measured upon hospital arrival and were subsequently used along with Stewart's approach to acid-base analysis to predict AKI development and in-hospital death. The area under the receiver operating characteristic curve (AUC) and logistic regression analysis were used as statistical tests. Results: Overall, 343 patients who were treated in the intensive care unit were enrolled. The initial levels of lactate, AG, and BD were significantly higher in the AKI group (n=62). Both effective SID [SIDe] (20.3 vs. 26.4 mEq/L, p<0.001) and SIG (20.2 vs. 16.5 mEq/L, p<0.001) were significantly higher in the AKI group; however, the AUC of serum SIDe was 0.842 (95% confidence interval [CI]=0.799-0.879). Serum SIDe had a higher predictive capacity for AKI than initial creatinine (AUC=0.796, 95% CI=0.749-0.837), BD (AUC=0.761, 95% CI=0.712-0.805), and AG (AUC=0.660, 95% CI=0.607-0.711). Multivariate logistic regression analyses revealed that diabetes, lactic acidosis, high SIG, and low SIDe were significant risk factors for in-hospital mortality. Conclusion: Initial SIDe and SIG were identified as useful predictors of AKI and in-hospital mortality in intoxicated patients who were critically ill. Further research is necessary to evaluate the physiological nature of the toxicant or unmeasured anions in such patients.

• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.39-45
• /
• 2021

Scrubbers that treat hazardous materials at workplaces have high treatment efficiency; however, the design is complex, and pumps need to be operated 24 hours a day, which can be costly. Therefore, to minimize the operating costs, small businesses do not install scrubbers, or operate them while circulation pumps are suspended. Hence, this study investigated the application of low-cost, high-performance scrubbers that can be used economically in small businesses. Low-cost, high-efficiency scrubbers are applied to bubble columns to utilize devices for hazardous chemical absorption treatment purposes, and for the development of these scrubbers, absorption performance was reviewed and the optimal application method was studied under certain conditions. The changes in the absorption performance of hazardous gas were studied in certain environments by varying the physical conditions, and the optimal application methods were analyzed. The results showed that, while it was possible to treat some of the gas flowing into the low cost, high performance scrubber, the treatment capacity was reduced. Performance degradation was prevented by supplying an absorption liquid, and a certain level of absorption was maintained depending on the amount of circulation. Based on this, three types of site application methods of low cost, high performance scrubbers were presented. In addition, the appropriate timing of circulation and anti freezing measures were also discussed.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.