• Tunnel and Underground Space
• /
• v.30 no.5
• /
• pp.473-483
• /
• 2020

This paper examines the vertical stress change concentrated on mine pillar which occurs due to the stress disturbance from opening excavation at room and pillar mine by FLAC3D, a finite difference method (FDM) software. The mesh size combination is decided with a careful consideration of relative error and run-time, then its performance is verified. A series of numerical analyses is conducted and the vertical stress at central pillar was observed for the test cases of 1×1 to 11×11 mine pillars, 40 m to 320 m depth with 40 m difference. The results show that the vertical stress of pillar approaches to the similar value with the value estimated by tributary area theory(TAT) when the development area (N_P) is increased or the height of overburden (H_OB) is decreased, while it is overestimated in the opposite case. Furthermore, it also represents that the vertical stress factor (VSF) converges to a specific value when the depth is increased whille keeping the development area identical.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.231-238
• /
• 2012

The rockbolt functions as a main support, which restricts enlargement of the plasticity area and increases stability in the original ground around tunnels, and prevents a second deformation of an excavated surface by supplementing vulnerability arising from opening of the excavated surface. System bolting is generally applied if ground conditions are bad. System bolting is generally installed perpendicular to the excavation direction in every span. If a place is narrow, or it is difficult to insert bolts due to construction conditions, it may be connected and used with short bolts, or installed obliquely. In this study, laboratory model tests were performed to analyze the effect of the ground being reinforced by inclined bolts, based on a bending theory that assumes that the reinforced ground is a simple beam. In all test cases, deflections and vertical earth pressures induced by overburden soil pressure were measured. Total of 99 model tests were carried out, by changing the installation angle of bolts, lateral and longitudinal distance of bolts, and soil height. The model test results indicated that when the installation angle of bolts was less than $75^{\circ}$, deflections of model beams tended to increase rapidly. Also, the relaxed load that was calculated by earth pressure was rapidly increased when the installation angle of bolts was less than $75^{\circ}$. However, the optimum installation angle of inclined bolts was judged to be in the range of $90^{\circ}{\sim}75^{\circ}$. Also, as might be expected, the reinforcement effect of bolts was increased when the longitudinal and lateral distance of bolts was decreased.

• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.89-99
• /
• 2016

Objectives : This study was performed to develop objective methods for evaluating facial palsy sequelae using a 3D Facial Scanning System. Methods : Fifty-eight patients with facial palsy sequelae were selected. Their medical records were reviewed to collect demographic data, facial palsy sequelae evaluation, Facial Disability Index questionnaire, and test results (3D Facial Scanning System). Five different facial expressions (at rest, eye closure, eyebrow elevation, smiling, and whistling) were photographed. Sunnybrook Scale was associated with distances between predetermined facial points. Results : The average Sunnybrook composite score was $58.88{\pm}17.31$. Secondary movements (mouth to eye synkinesis, contracture of eye, and contracture of mouth) showed significant difference according to the Sunnybrook Scale. In voluntary movements, eyebrow height at eyebrow elevation, length between mouth angle and central line while whistling, and eyelid width at maximum eye opening showed significant difference. Facial palsy Sequelae Index (FSI) was correlated with Sunnybrook sub-scales (resting symmetry, voluntary movement, and synkinesis). Conclusion : These results demonstrate that a 3D Facial Scanning System is useful for evaluating facial palsy sequelae. This method may facilitate objective evaluation for facial palsy sequelae and it could be applied in clinical trials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.201-207
• /
• 1979

The stow net now used in the Yellow Sea, are traditional bag net with the opening held by a lighter upper and a weighted lower beams standing against the current. Such bag net anchored at the bottom are known in many countries, particularly in the estuaries of large rivers, but more rarely in sea fisheries, because they are too much affected by the weather, moreover a permanent strong current is necessary. Some scientists intended to improve this fishing gear, using the shearing devices instead of a lighter upper and a weighted lower beams in order to widen mouth of the stow net however they are unsuccessful. One-fortieth scale model net of the stow net was tested in a circular water tank with an effective volume of $5.67m\times1.76m\times1.00m$ of observing the configuration and tension of the net. Experiments were carried out under the various combination including water velocity, spherical floats and elevating floats with the shearing hoods instead of the upper beam. We found those devices offered a very low resistance per net area to current compared with the spherical floats or upper beam, and had a fairly good shearing power at any velocity and direction of the current. The total resistance (R) of the model net to which shearing hoods and floats are attached can be induced by the following formula under the condition of 0.25m/sec to 0.5m/sec, $$R(kg)=3.11V^{1.54}$$ The height (h) of the improved model net (m-B) is higher than traditional model net(m-A) with upper and lower beams, m-A: h(cm)=89.22-2.42(V-15). $V\geqq15,\;cm/sec$ m-B: h(cm)=89.20-0.78V (V:cm/sec) The catch efficiency of improved model net is 1.5 times traditional model net.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.115-126
• /
• 2016

Objective: The purpose of this study was to investigate plantar foot pressure and static balance according to the type of insole in the elderly. Methods: Thirteen elderly (mean age: $67.08{\pm}2.25years$, mean height: $159.63{\pm}9.64cm$, mean body weight: $61.48{\pm}9.06kg$) who had no previous injury experience in the lower limbs and a normal gait pattern participated in this study. Three models of insoles of the normal, 3D, and triangle types were selected for the test. The Pedar-X system and Pedar-X insoles, 3.3 km/h of walking speed, and a compilation of 20 steps walking stages were used to analyze foot-pressure distribution. Static balance test was conducted using Gaitview AFA-50, and balance (opening eyes, closing eyes) was inspected for 20 s. One-way ANOVA was conducted to test the significance of the results with the three insoles. p-value of less than .05 was considered statistically significant. Results: The mean foot pressure under the forefoot regions was the lowest with the 3D insole during treadmill walking (p<.05). The mean value under the midfoot was the highest with the 3D insole (left: p<.05, right: p<.01). The mean value under the rearfoot was the lowest with the 3D insole (p<.001). The maximum foot pressure value under the foot regions was the lowest on both sides of the forefoot with the 3D insole. A statistically significant difference was seen only in the left foot (p<.01). The maximum value under the midfoot was the highest with the 3D insole (p<.001). No statistically significant difference was detected on the values under the rearfoot. In the case of vertical ground reaction force (GRF), statistically significant difference was seen only in the left side rearfoot (p<.01). However, static balance values (ENV, REC, RMS, Total Length, Sway velocity, and Length/ENV) did not show significant differences by the type of insole. Conclusion: These results show that functional insoles can decrease plantar pressure and GRF under the forefoot and rearfoot. Moreover, functional insoles can dislodge the overload of the rearfoot and forefoot to the midfoot. However, functional insoles do not affect the static balance in the elderly.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.132-141
• /
• 1994

In order to study the effects of silage additive on the quality and in preventing aerobic deterioration, reed canarygrass silages were made with various levels of formic acid, caproic acid and a mixture of the two acids. Preparation of silages cutted into about 1.5 cm length with the forage cutter and packed in vinyl bags(50 kg of capacity, 0.1 mrn of thickness), and it also divided nine types of experimental treatments. Aerobic deterioration in the silages were investigated for 7 days of aerobic exposure periods, and the plastic vessel of diameter 25 cm, a height 30 cm used as a tool. The results obtained from this experiment are summarized as fellow. 1. Crude protein and NFE contents at the time if opening were increased in the silage with mixture of formic and caproic acids(P<0.01). Crude fiber and ADF contents during the 7 days of aerobic exposure periods were the decreased in the sslages with mixture of two acods treatment(P<0.01). 2. Temperature of the silage treated with fromic acid alone during the 2 days of aerobic exposure period reached$34.4^{\circ}C$, while that of the silage with caproic acid and mixture formic and caproic acids were not rapidly increased resulting by reduced aerobic deteriorarion. 3. The pH of silages treated with formic acid alone during 7 days of aerobic exposure was not effectively changed, while solages treated with caproic acid were effectively stabilized. 4. The ratio of amminia nitrogen to total nitrogen was significantly decreased in silages with formic acid>caproic acid>mixture of both in the order(P<0.01). 5. Microbiological population of the silage were positively changed during the 7 days of aerobic exposure period. Solages with formic acid were deteriorated at ensiling observed, while applicarion of 1.2% caproic acid was partially reduced deteriorarion by precenting of the growth moulds.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.41-47
• /
• 2010

Purpose: The purpose of this study was to compare the functional abilities of the low bulb obturators with those of high bulb obturators in terms of patients' evaluation. Material and methods: This study included 11 maxillectomy patients who underwent postoperative prosthodontic rehabilitations. Two obturators of the same design except for different bulb heights, were fabricated for each of the maxillectomy patient. After two months of alternate use, the functions of the obturators were measured by investigating the patients' subjective evaluations in terms of convenience, speech, nasality, leakage, and mastication and identifying their preferred prostheses. Wilcoxon signed rank test was used as a statistical method (P < .05). Results: There were no significant differences in patient evaluations of low and high bulb obturators (P >.05). And patients' preferences varied. Conclusion: In extreme situation such as in mouth opening limitation, the use of low bulb obturators can be recommended and result in comparable speech function to that of obturators with high lateral walls.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.691-704
• /
• 2007

Between 1997 May and 2007 May, One hundred and seventeen patients were treated. There were 129 cases of sinus elevation using a lateral window opening procedure and 258 implants placed simultaneously or delayed. The cumulative survival rate of the implants calculated. The implants were evaluated according to surgical site, quality and quantity of bone, graft material, membrane used, the length and diameter of the implant and complications. 1. The 10-year cumulative survival rate of the implants by sinus augmentation using lateral window approach was 96.90%. 2. There was no difference in the survival rate between the implant placed simultaneously with sinus elevation (one stage) and the procedure performed in the delayed procedure (two stage). 3. There was no difference in the survival rate according to the type and amount of graft materials. 4. There was no difference in the survival rate according to the implant site, bone quality and quantity. 5. There was no difference in the survival rate when the $CollaTape^{(R)}$ or Gore-Tex was placed in the window of the lateral wall. 6. There was no difference in the survival rate of the implant length and diameter. 7. The survival rate was as low as 75.00% when there were more than two complications. Implant placement with sinus augmentation using the lateral window approach is a predictable treatment method. Although the vertical height of residual ridge is insufficient and the quality of bone is poor, the normal survival rate of the implants would be expected if an appropriate graft material and membrane is used with greater effort to prevent complications.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.152-155
• /
• 2012

A new Saxifraga fortunei 'Pinkle' was bred by crossing 'Juno' with 'Hongoan', both with light pink (RP-N66A)-colored petals. The selection of promising lines and characterization of flowers were conducted from 2004 to 2008 year in greenhouses of the Highland Agriculture Research Center, NICS, RDA. The flowering of 'Pinkle' starts on October 7 and lasted for 27 days. The number of flowers per plant is 99.7 with many flowering habits. The flower show mixed dark pink (R-P N66C) colors at opening. The flower have 5.0 petals, each have the size is 2.9 cm in width and 3.2 cm in length. Mean plant height is 15.8 cm and number of leaves are 44.3 ea. 'Pinkle' can be used as a pot flower. Fifty percent shading of the sunlight is recommended and soft rot disease occurs caused by over-irrigation. 'Pinkle' was registered as a new cultivar in Korea Seed and Variety Service in April 2011.