DOI QR코드

DOI QR Code

주방식 광산의 패널 광주 수직응력 추정을 위한 수치해석 연구

Numerical Study on Vertical Stress Estimation for Panel Pillars at Room and Pillar Mines

  • 윤동호 (서울대학교 에너지시스템공학부) ;
  • 송재준 (서울대학교 에너지시스템공학부)
  • Yoon, Dong-Ho (Department of Energy Systems Engineering, Seoul National University) ;
  • Song, Jae-Joon (Department of Energy Systems Engineering, Seoul National University)
  • 투고 : 2020.10.21
  • 심사 : 2020.10.28
  • 발행 : 2020.10.31

초록

본 연구에서는 3차원 유한차분법(FDM) 프로그램인 FLAC3D를 이용하여 주방식 채광장을 모사하고 채굴적 형성에 의한 현지응력 교란으로 광주에 집중되는 수직응력의 변화를 분석하였다. 오차율과 해석시간을 고려하여 적절한 조합의 요소망 크기를 선정하고 지류론 암반을 모사하여 요소망 조합과 개발 심도에 따른 해석 성능을 검증하였다. 본 해석에서는 개발 영역 내에 1개(1×1)~ 121개(11×11)의 패널 광주가 생성되도록 채굴적을 형성하여 가장 높은 수준의 응력집중이 발생하는 중앙부 광주의 상부 수평단면에 작용하는 수직응력을 측정하였다. 40 m~320 m까지 40 m 단위로 굴착심도를 변경하여 동일한 과정을 반복 수행하였다. 해석 결과, 개발 규모(NP)가 클수록, 개발심도(HOB)가 작을수록 중앙부 광주의 수직응력 값이 지류론 추정값에 가까워지는 것을 확인하였다. 또한, 개발 규모가 작고 대심도인 경우에는 지류론에 의한 추정 시 수직응력이 과대평가될 수 있으며, 동일한 개발규모인 경우 심도가 증가할수록 수직응력계수(VSF)가 일정한 값으로 수렴하는 경향이 있음을 확인하였다.

This paper examines the vertical stress change concentrated on mine pillar which occurs due to the stress disturbance from opening excavation at room and pillar mine by FLAC3D, a finite difference method (FDM) software. The mesh size combination is decided with a careful consideration of relative error and run-time, then its performance is verified. A series of numerical analyses is conducted and the vertical stress at central pillar was observed for the test cases of 1×1 to 11×11 mine pillars, 40 m to 320 m depth with 40 m difference. The results show that the vertical stress of pillar approaches to the similar value with the value estimated by tributary area theory(TAT) when the development area (NP) is increased or the height of overburden (HOB) is decreased, while it is overestimated in the opposite case. Furthermore, it also represents that the vertical stress factor (VSF) converges to a specific value when the depth is increased whille keeping the development area identical.

키워드

참고문헌

  1. Chang, S.H., Lee, C., Choi, S.W., Hur, J. and Hwang, J., 2014, Design of Unsupported Rock Pillars in a Room-and-Pillar Underground Structure by the Tributary Area Method and the Pillar Strength Estimation, Tunnel and Underground Space, Vol. 24, No. 5, 335-343. https://doi.org/10.7474/TUS.2014.24.5.335
  2. Esterhuizen, G.S., Dolinar, D.R. and Ellenberger, J.L., 2011, Pillar strength in underground stone mines in the United States, International Journal of Rock Mechanics and Mining Sciences, Vol. 48, No. 1, 42-50. https://doi.org/10.1016/j.ijrmms.2010.06.003
  3. Ghasemi, E., Ataei, M. and Shahriar, K., 2014, An intelligent approach to predict pillar sizing in designing room and pillar coal mines, International Journal of Rock Mechanics and Mining Sciences, Vol. 65, 86-95. https://doi.org/10.1016/j.ijrmms.2013.11.009
  4. Hauquin, T., Deck, O. and Gunzburger, Y., 2016, Average vertical stress on irregular elastic pillars estimated by a function of the relative extraction ratio, International Journal of Rock Mechanics and Mining Sciences, Vol. 83, 122-134. https://doi.org/10.1016/j.ijrmms.2015.12.004
  5. Jang, M.H. 2018, Probabilistic Evaluation of the Panel Life Time Using Steel Beam for Panel Mining in Soft Rock, Tunnel and Underground Space, Vol. 28, No. 4, 325-342. https://doi.org/10.7474/TUS.2018.28.4.325
  6. Jang, M.H. and Lee, S.E., 2017, Possibility and Countermeasures of Subsidence according to Mining Method and Current Status in the Operation Mines, Tunnel and Underground Space, Vol. 27, No. 6, 366-376. https://doi.org/10.7474/TUS.2017.27.6.366
  7. Kim, J.W., 2015, Influence of pillar width on the stability of twin tunnels using scaled model tests, Tunnel and Underground Space, Vol. 25, No. 5, 423-434. https://doi.org/10.7474/TUS.2015.25.5.423
  8. Kim, W.B., Yang, H.S. and Ha, T.W., 2012, An assessment of rock pillar behavior in very near parallel tunnel, Tunnel and underground space, Vol. 22, No. 1, 60-68. https://doi.org/10.7474/TUS.2012.22.1.060
  9. Poulsen, B.A., 2010, Coal pillar load calculation by pressure arch theory and near field extraction ratio, International Journal of Rock Mechanics and Mining Sciences, Vol. 47, No. 7, 1158-1165. https://doi.org/10.1016/j.ijrmms.2010.06.011
  10. Yoon, D.H. and Song, J.J., 2019, Review on Design of Underground Mine Openings in Korea and Overseas, Tunnel and Underground Space, Vol. 29, No. 1, 30-37. https://doi.org/10.7474/TUS.2019.29.1.030