• Computers and Concrete
• /
• 제18권6호
• /
• pp.1135-1151
• /
• 2016

For investigating the effect of the pre-existing joints on the initiation pattern of hydraulic fractures, the numerical simulation of circular holes under internal hydraulic pressure with a different pattern of the joint distributions are conducted by using a finite element code, FRANC2D. The pattern of hydraulic fracturing initiation are scrutinized with changing the values of the joint length, joint offset angle. The hydraulic pressures with 70% of the peak value of borehole wall breakout pressure are applied at the similar models. The simulation results suggest that the opening-mode fracture initiated from the joint tip and propagated toward the borehole for critical values of ligament angle and joint offset angle. At these critical values, the crack grow length is influenced by joint ligament length. When the ligament length is less than 3 times the borehole diameter the crack growth length increases monotonically with increasing joint length. The opening-mode fracture disappears at the joint tip as the ligament length increases.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.139-146
• /
• 2015

This is an experimental study on the engineering characteristics of perforated reinforced concrete beams with shells. In the material matter of this study, the water cement ratio put 60%, the ratio of substitution of oyster shells to fine aggregate 30%. And in the structural matter, the form of opening put circle and square, the size of opening as the radius and the length of it changed from one to three times of the beam depth with a change presence and absence of reinforced steel around opening. All thirteen reinforced concrete beam tests composed one standard beam and twelve six beams with the circle and square opening were tested in shear strength under two points loading and compared and analyzed the characteristics of test beams under the same conditions one another. The results of the study showed as followed. 1) The initial crack load value of the opening test beams is similar the standard beam but the maximum load value decreased with increase in proportion of the opening size, in the square opening than the circle opening and in the absence than the presence of reinforced steel. 2) As the difference between the circle opening and the square opening beams is represented 2.17~9.8% in the maximum load value and the load capacity of the square opening suddenly decrease than it of the circle opening, it is judged because of the shortage of concrete section, the concentration of the stress in the corner of the square opening and material influence of shell substitution. 3) The failure figure such as the pattern of the crack and so on is represented brittle failure as the opening size is the bigger and the ratio of substitution is higher because of the lack material properties.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.37-42
• /
• 2011

This Paper aims for analyzing the effect of opening types on wind-driven ventilation performance in basement parking lots of apartment. The scale model of basement parking lot was made, wind tunnel tests conducted. Wind pressure of three opening types was measured, wind pressure coefficient calculated. As the result, it showed that the air flow pattern of stack type opening was strongly changed by wind direction, but it was almost not at scuttle vent type. But, as for the difference of wind pressure coefficient, stack type opening was more than the other two types.

• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.167-181
• /
• 1997

The aim of this study was to investigate the relationship between velocity and factors which could affect the velocity of mandibular movement. For this study, 30 dental students without any masticatory signs and symptoms and 90 patients with temporomandibular disorders(TMD) were selected as the control group and the patients group, respectively. After determining Angle's classification and lateral guidance pattern of occlusion, clinical examination for TMD was perfomed. Velocity and distance of mandibular movements were recorded with BioEGN, reproducibility index of lateral excursions was evaluated by Pantronic(PRI) and BioEGN (BERI) activity in masticatory and cervical muscles were measured with BioEMG, and occlusal contact time and cross-arch unbalance(Total left-right statistics, TLR) on clenching were recorded with T-scan, respectively. The results of this study were as follows : 1. Velocity in the patients was faster than that in the controls in most mandibular movements, but on wide opening and closing movement, result was reverse. 2. Velocity on closing movements were faster than that on opening movements in the control group and a similar tendency was also shown in the patients group. 3. Patients with muscle disorders showed a tendency to have the highest value of velocity of all diagnostic subgroups, while patients with degenerative joint diseases showed a tendency to have the lowest value. 4. Patients with canine guidance showed a tendency to have the highest value of velocity in three subgroups by lateral guidance pattern, while patients with group function showed a tendency to have the lowest value. 5. BERI had a positive correlation with opening velocity on lateral excursion, while TLR had a negative correlation with opening velocity on swallowing. 6. EMG activity on clenching in masticatory muscles had negative correlation with opening velocity on border movements, and on swollowing, while the activity in rest correlated positively with opening velocity on border movements. 7. There were positive correlation between the velocity and the distance in long components of mandibular trajectory.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.617-623
• /
• 2021

The objective of this study is to simulate valve flow coefficient and flow characteristics such as velocity and pressure distribution for butterfly valve. The size of the valve used in this study is 125A. The range of the valve opening angle was α=15°~70°, and it was changed by 5°. At the range of α=15°~30°, the valve flow coefficient K_𝜐 gradually increased, and after α=30°, it increased rapidly. In the range of α=20°~70°, the pressure change in the -2.9cm~+2.9cm region in the pipe greatly depended on the opening angle and the position within the pipe. However, after +2.9cm, the pressure at the rear end of the valve was shown to depend only on the opening angle. At α=20°, Vortex shedding occurred for the first time at time t=0.25sec and continuously occurred in rear end of the valve over time. After α=45°, in the flow pattern at the rear end of the valve, the upward flow at the lower end of the valve and the flow at the upper end met each other to form a mixed flow. This flow phenomenon was shown to form a more intense mixed flow in the rear end region as the opening angle increased. Vortex flow occurred for the first time at α=15°, and the opening angle increased, the occurrence and disappearance of this flow phenomenon occurred periodically according to the certain flow region. The pattern of the pressure distribution in the region at the rear end of the valve showed a tendency to agree well with the results of the vorticity distribution.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.66-71
• /
• 2021

In this study, the shape design optimization of a refrigerator door hinge stopper was performed to reduce the discrepancy in the opening forces of the left and right doors of a double-door refrigerator. A finite element model was constructed and analyzed by quasi-static analyses to evaluate the structural performance of the door hinge stopper. The reaction moment calculated at the hinge axis was used as a measure of the door opening and closing forces. The design objective is to increase the door opening force by 50% while maintaining the door closing force and the maximum stress calculated in the body of the hinge stopper at the current level. A new design concept with a contacting slot was proposed to decouple the door closing and opening forces. Shape optimization was performed to determine the dimensions of the new design of the hinge stopper, and the rib pattern was determined by topological optimization to further increase the door opening force. It was observed that the new design met all design requirements.

• 한국경제지리학회지
• /
• 제22권4호
• /
• pp.576-591
• /
• 2019

본 연구는 경기 이남의 역세권과 구도심에 위치한 '롯데몰 수원점'을 사례로 위계선형-이중차분법을 활용하여 거리 접근성이 권선구 내 주변 아파트가격에 미친 효과를 분석한다. 이에 대한 분석 결과는 다음과 같다. 첫째, 공사 이전에는 거리 접근성 효과가 U자형을 보여주고 있다. 이는 수원역 주변의 소음과 교통 혼잡 등에 따른 부정적 외부효과가 권선구 내 주변 아파트가격에 부정적인 영향을 미쳤다는 것을 시사한다. 둘째, 공사 기간과 개점 이후 등 상이한 시점에 따른 거리 접근성 효과는 후자에서만 통계적으로 유의하며 개점 이전과는 달리 역 U자형을 나타내고 있다. 이는 개점 이후에는 복합쇼핑몰과 근거리 구간에서는 그것이 여가·편의공간으로 인식되는 외부효과가 권선구내 주변 아파트가격에 긍정적인 영향을 미치고 있다는 것을 의미한다. 셋째, 거리 접근성 효과는 약 1.6-1.7km 내외에서 변곡점을 이루고 있다. 공사 이전에는 U자형의 거리조락 현상을, 반면에 개점 이후에는 역 U자형의 패턴을 보여주고 있다. 후자는 복합쇼핑몰과 매우 인접한 권선구 내 아파트들이 상대적으로 적은 정(+)의 외부효과를 향유한다는 것, 즉 이들은 소음과 교통 혼잡의 부정적인 외부효과에 일정 정도 노출되어 있지만 거리가 어느 정도 떨어진 권선구내 아파트들은 이러한 정(+)의 외부효과를 극대화하고 있다는 것을 함의한다. 이러한 분석 결과들은 전체적으로 복합쇼핑몰에 대한 거리 접근성 효과가 입지별로 차별적이라는 것을 시사한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1659-1663
• /
• 2011

Precast concrete slab track is a track structure to be installed by transporting and assembling precast concrete slabs manufactured at the factory. This method can improve concrete quality, provide easy maintenance and reduce construction time, compared with in-situ concrete track. However, the concrete slabs being continuously connected in longitudinal direction, due to the temperature change between summer and winter, the openings at slab joints have occurred. Thus, in this study, to identify the cause of this opening of slab joint, the joint opening caused by temperature drop in the longitudinally continuous precast concrete slab track has been predicted using three-dimensional finite element analysis, and compared with field measurements. Based on the proven model, the slab joint opening, and the stress pattern of concrete slab and steel reinforcement according to concrete slab-base friction properties, concrete-reinforcement bond properties, and prestressing were analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.609-614
• /
• 2000

This paper is an experimental study of the normal strength concrete beam and high strength concrete beam for the analysis of bending and shear behavior. In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling increase construction cost, the good ceiling system such as beam with opening give to economical merits because of a substantial reduction in materials and construction cost. For the analysis on the mechanical behavior of the reinforced high strength and normal strength concrete beams with circular opening in the web, the stress concentration of the circular opening, crack pattern and reinforcing methods were studied. Twenty test pieces with different reinforcing methods and difference concrete strength were tested and their resisting forces and load deflection curves were defined in this study.

• 한국의상디자인학회지
• /
• 제13권3호
• /
• pp.45-54
• /
• 2011

The purpose of this study is to help understanding of east-west culture fusion in fashion since 2000 years, to play a guideline's role in the development on fashion designs study. The methods of this study are academic literatures as well as practical study through case studies about actual works. Tendency of east-west culture fusion in fashion since 2000 years is shape and performance, pattern, accessary. Shape and performance are reinterpreted through east folk fashion transforming on west fashion, pattern shows traditional pattern of each nations, but letters of typical of each nations appears for new pattern which expresses nation identification. Accessary is in the harmony with east -west fashion culture like that without transform. Aesthetic value of east-west culture fusion in fashion since 2000 years is summerised opening, co-ownership, and amusement. First, opening is positiveness of acception and acknowledgment for other. Second, co-ownership turns towards humanism, and proves participating in globalism and really global village. Third, amusement is to express freedom, and to reveal privately emotion concealing in public area.