• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.265-277
• /
• 1996

The aim of this study was to investigate the electromyographic(EMG) activity of masticatory and cervical muscles according to chewing pattern in coronal plane during gum chewing. 70 patients with temporomandibular disorders and 30 dental students without any signs and symptoms of the disorders participated in this study. We measured the activity of masseter (MM), anterior temporalis(TA), sternocleidomastoideus(SCM) and trapezius muscle and recorded the chewing patterns using Biopak system synchronously. Chewing pattern was classified into S- or L-pattern by the midline opening path and short or long type by the lateral distance from midline. Obtained data were analyzed with SAS/STAT Program. The obtained results were as follows : 1. Generally, there was tended to be higher activity in the control group than in the patients group. 2. When comparing EMG activity according to preferred side, the muscle activity was tended to higher on the preferred chewing side than on the contralateral side. However, this difference is insignificant statistically 3. In unilateral affected patients, there was no difference in muscle activity between affected chewing side and unaffected chewing side except for the EMG of the temporalis anterior muscle. 4. Despite the varietal in each of the following variables, there mere no differences in EMG activity during gum chewing: chewing pattern in coronal plane and lateral distance of chewing. 5. The activity of SCM in chewing side was higher than that in contralateral side (p<0.001), but there was no difference in trapezius muscle. 6. In all of the control group, there was appeared L-chewing pattern than not involved the midline during preferred side chewing.

• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3660-3665
• /
• 2012

For blind equalization, it is necessary to open an eye pattern quickly in the early stage of equalization, after that it is important to lower an error level of equalizer output signal. This paper discusses coarse error estimation using signal points specifically determined and fine error estimation using original signal constellation, and proposes two suggestions for how to take advantage of the two error estimation methods. The two error estimates, respectively, are effective to quickly open an eye pattern in the state of eye pattern closed, or to lower the level of an error in the steady-state after the eye pattern opening. Two blind equalization algorithms are proposed and their performances are compared, which select one of the two error estimates depending on the state of convergence of the equalizer, or combine two errors weightedly according to the relative reliabilities of the two error estimates, and calculate the new error.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.267-276
• /
• 2019

This study develops 3D-printed-garment collections for a fashion show presentation. A design concept using traditional patterns that consisted of garments regarding the limitation of the printing technology was investigated in order to develop the collection. The structures of the connecting joints of the textile parts which could be easily and sturdily interconnected were invented. Wearability as garments that could be naturally worn on the human body were sought. As a result, four 3D-printed-garments were developed. The 1st garment composed of objects based on a 'Yeon-Dang-Cho'-pattern was constructed as a geometric robe style using a FDM 3D printer and transparent TPU filaments. The 2nd and 3rd 3D-printed-garments composed of an object based on a 'Boe-Sang-Hwa'-pattern was constructed as a distorted one-piece exaggerating the silhouettes of shoulders and waist parts as well as a straight asymmetric tunic style that used the same printer and material as the 1st garment. The last garment composed of an object based on a 'Boe-Sang-Hwa'-pattern printed using a SLA 3D printer and flexible-liquid-resin was constructed attaching the objects on the fabric material by the hot-press machine. The four developed garments were presented in the opening fashion show of 'the 6th International 3D-printing Korea Expo'. This study provides a basic case for related studies to adapt 3D-printing technology in textile pattern development of garment construction.

• Journal of the Korean Home Economics Association
• /
• v.43 no.8 s.210
• /
• pp.69-81
• /
• 2005

The purpose of this study is to design high school boy's uniforms, which fit well and express the traditional aesthetics of Korean clothing. Korean traditional clothing is getting ground for the use as active wear as well as formal wear such as wedding or special holiday clothing. This is partly due to the introduction of western clothing in Korea because of the practical nature of this type of clothing. This study was carried out as follows: 1. First, 197 high school boys from 5 different high schools were surveyed. All of these schools use Korean style school uniforms. The survey asked the students about their satisfaction with the current designs, problems and design preferences for Korean style high school uniforms. In general, the boys are not satisfied with the aesthetic and fashionable aspects of their uniforms. 2. The second survey dealt with design preferences from a variety of design options of Korean-style school uniforms. The design options were presented to the students as in the form of 10 different types jackets and 6 different types of pants. Using the results of the second survey as a guideline, the designs of Korean style school uniforms were developed. 3. In order to make the test garments, a block bodice pattern for the Korean style school uniforms was developed. Using the developed bodice block pattern, 6 designs were made of wool. The 6 test designs consisted of 3 different types of jackets and 3 different types of pants. 4. Incorporating the most preferred design features, school boy Korean style school uniform designs were developed. The characteristics of the design include neck line opening and its finishing, AH and sleeve shape, embroidered traditional patterns and fastenings. In this study we were able to develop comfortable clothing, which expressed the traditional aesthetics of Korean clothing.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.1
• /
• pp.27-34
• /
• 2007

Objective : On the magnetic resonance image (MRI) of the infiltrating brain tumor, enhancement is usually higher in malignant tumor than in benign tumor, and tumor cells can invade into the peritumoral area without definite enhancement. In various pathological conditions, the blood brain barrier (BBB) becomes changed to pathological condition, allowing various materials extravasating into the interstitial space, and degree of enhancement is depend on the pathology. Authors performed dynamic MRI on enhancing and surrounding edematous area in order to evaluate the degrees of opening of BBB, to differentiate tumor from non-tumorous condition, and to determine its relationship with the recurrence of the tumor. Methods : Dynamic MRI was performed in 25 patients. Dynamic scans were done every 15 seconds after administration of Gd-DTPA on the enhancing and surrounding area for maximum 300 seconds, and the patterns of enhancement were ana lysed. The enhancement curve with initial steep increase followed by slow decrease was defined as "N pattern", those with initial steep increase followed by additional slow increase as "T pattern", and those with initial steep increase followed by plateau as "E pattern". Histopathological findings were compared with the dynamic scan. Results : The graphs taken from enhancing area showed "T pattern" regardless of pathology. In the surrounding area, "T pattern" was noticed in the malignant tumors, but "E pattern" or "N pattern" was noted in low-grade or benign tumors and non-tumorous condition. "T pattern" in the surrounding area was related to the malignant with tumor cell infiltration and recurrence. Conclusion : The results suggest that the malignant tumor infiltration changes the condition of BBB enough to extravasate the Gd-DTPA. Enhancement pattern in the surrounding edematous area may be a useful information to differentiate the malignant glioma with the low-grade and benign tumors or other non-tumorous conditions.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.377-382
• /
• 2006

In this paper, two methods based on the use of morphology and pattern matching prior to detect classified defects automatically on the back light unit which is a part of display equipments are proposed. One is the template check method which detects small size defects by using closing and opening method, and the other is the block matching method which detects big size defects by comparing with four regions of uniform blocks. The TC algorithm also can detect defects on the non-uniform pattern of BLU by using revised Otsu method. The proposed method has been implemented on the automatic defect detection system we developed and has been tested image data of BLU captured by the system.

• Journal of architectural history
• /
• v.13 no.3
• /
• pp.37-50
• /
• 2004

Presentation is the way of revealing regionality that is hidden into the inner world. The expression of regionality has to be based on the origin and at the same time created newness as always suitable for the present through combination of 'familiarity' and 'unfamiliarity'. Regionality that has been maintained even under the application modern trends, spirits, technologies and materials should be now disclosed. Creating new forms that reflect regionality is possible only when a keen sense(emotion) always focusing on the essence of the earth works together with foresight(imaginative power) clarifying global pattern changes, under high tensions between both of them. Kim Su-Keun succeeded in reinterpreting traditional spaces, but failed in communicating patterns of life, ultimately revealing stiffness with no tension and no creativity. Kim Jung-Up could not draw out a whole meaning of relations among traditional fragments or relations between them and the present. He only borrowed such fragments from the view of formative art. For 'disclosed abstract', 'familiarity' and 'unfamiliarity' are repeated circularly and cope with pattern changes, continuously creating new forms and showing unity as a complete calmness(rest). In "YangDuk Catholic Church" by Kim Su-Keun provides a simultaneous reactivation of various images through continuous cross-weaving rather than being inclined to either the earth or the world. Based on the technique of 'disclosed abstract', "YangDuk Catholic Church" created a new form and space never seen before.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.519-527
• /
• 1996

Most operation related to the application granular agrochemicals in korea are manual and labour consuming. As a multipurpose granular applicator, a pneumatic granular applicator that can be attached to conventional ride -on machines for paddy field was designed in this study. Experiments and simulations were carried out for determine in the design factors with one fertilizer (DongBu 21-17-17) and one pesticide (SamKong Ivi). The maximum terminal velocity of granular chemicals was estimated as 14.2m/s. A better distribution pattern was obtained at the diffuser having only deflectors without dividing guides. The diffuser spacing 1.0m for the fertilizer and the diffuser spacing 0.8m for the pesticide at the boom height over 0.80m were acceptable for the uniform distribution. In the case that the forward speed of ride-on machines was 0.7m/s, the groove opening and the roller speed of the selected metering device were13mm -15mm at 2 rps for the fertilizer, and 9 mm-11mm at 0.25rps or the pesticide. This study suggested a method of developing a pneumatic applicator for granular agrochemicals.