• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.361-366
• /
• 1986

Fracture of the carpal scaphoid bone is the most common fracture of the carpus. Unfortunately. nonunion are common since the symptoms do not alert patients to seek early medical treatment and the diagnosis is easily missed. Fracture of the scaphoid is a common condition whose management remains controversial. The conservative treatment has many complications, these include inability to work while in plaster, stiffness of the wrist afterwards, muscle wasting, weakness and malunion. So various operative treatments of scaphoid fracture have been developed. Open reduction by use of screws suggested by Maclaughlin first in 1954. In 1984 a new and simple operative technique has been developed to provide rigid internal fixation for all types of fractures of the scaphoid by T.J. Herbert. This involves the use of a double-treaded bone screw which provides good fixation that, after operation, a plaster cast is rarely required and most patients are able to return to work within a few weeks. Authors have experienced 10 cases of scaphoid fracture and accomplished good result in all cases by internal fixation using Herbert screw. The results are as follows : Of these 10 fractures, 2 were fresh fractures and 8 were non unions of scaphoid fracture. In nonunion cases, the time interval between fracture and operation was from 5 months to 5 years. The postoperative immobilization period was average of 4 weeks. Short period of immobilization achieved early functional recovery of the wrist. The bony unions in roentgenogram were seen from 3 months to 9 months after operation. In 2 cases the fracture gap was seen after 9 months. But in these cases the symptoms such as pain and range of motion of wrist were improved.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.53-60
• /
• 2020

The purpose of this paper is to evaluate the image of the Styrofoam Wedge that can minimize the position change by supporting the wrist during the True PA and lateral examination of the wrist. In 50 people, the gap between the distal radius joint facet and the wrist bone was measured after the wrist True PA and lateral images were obtained using a general examination(vertical), tube angle(vertical:10°, lateral:20°) and Styrofoam Wedge(vertical). When joint spacing was measured in the True PA and lateral images of the wrist, general examination(5.54mm, 9.42mm), tube angle(2.05mm, 5.07mm) and Styrofoam Wedge(1.79mm, 5.46mm) were shown to be small. The smaller the joint spacing, the easier it is to observe that is open. Therefore, True PA and lateral imaging of the wrist Styrofoam Wedge can reduce the distortion of the image and thus acquire images of high diagnostic value. In addition, it may be possible to reduce the deviation caused by the change of patient's position during re-projection.

• Journal of The Korean Association For Science Education
• /
• v.40 no.4
• /
• pp.359-374
• /
• 2020

This study is a complex type consisting of survey study and self-study. The former investigated elementary teachers' epistemological beliefs on convergence knowledge and teaching. As a representative of the result of survey study I, as a teacher as well as a researcher, was the participant of the self-study, which investigated my epistemological belief on convergence knowledge and teaching and my execution of convergent science teaching based on family resemblance of mathematics, science, and physical education. A set of open-ended written questionnaires was administered to 28 elementary teachers. Participating teachers considered convergent teaching as discipline-using or multi-disciplinary teaching. They also have epistemological beliefs in which they conceived convergence knowledge as aggregation of diverse disciplinary knowledge and students could get it through their own problem solving processes. As a teacher and researcher I have similar epistemological belief as the other teachers. During the self-study, I tried to apply convergence knowledge system based on the family resemblance analysis among math, science, and PE to my teaching. Inter-disciplinary approach to convergence teaching was not easy for me to conduct. Mathematical units, ratio and rate were linked to science concept of velocity so that it was effective to converge two disciplines. Moreover PE offered specific context where the concepts of math and science were connected convergently so that PE facilitated inter-disciplinary convergent teaching. The gaps between my epistemological belief and inter-disciplinary convergence knowledge based on family resemblance and the cases of how to bridge the gap by my experience were discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.235-245
• /
• 2011

EBooks refer to electronic versions of books which are accessible via internet with forms of digital texts. In recent years, Amazon's Kindle digital eBooks has revealed the possibilities of success of the e-book market, which leads other companies to launch eBook service such as Google's eBook stores and Apple's iPad and eBook service. These reveal that the eBook market is finally showing a substantial amount of growth. Although the issue of technical support of eBook copyright protection emerges from the fast growing eBook marketplace, current technic of commercial DRM for protecting eBook copyright protection still has problems of non-comparability. Therefore, with the current technical status, DRM comparability problems, which have already occurred in music DRM environment, would also happen in eBook environment. This study suggests a standard framework to support eBook DRM comparability. When development of the standard reference software for eBook DRM comparability is completed, the sources will be registered as shareware to be open to public.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.127-136
• /
• 2013

The study of the compatibility of EPUB DRM, granted by the Korea Copyright Commission, as a CT R & D project (Project Title: The Development of the standard reference software technology for International Standard EPUB-based eBook DRM) developed standards such as profile standards for encryption digital signature and authentication certificates and standards for technical terms of rights information. In 2012, these four standards have been established as the Korean Industrial Standards under the names of 'Encryption specification for EPUB DRM,' 'the Digital signature specification for EPUB DRM,' 'the Certificate specification for EPUB DRM,' and 'Definitions of Right Terms for EPUB DRM' through the ODPF(Open Digital Standardization Forum) and the TTA(Telecommunications Technology Association). The research project also proposed standards of ebook DRM license protocols in order for the four standards to practically apply to ebook DRM compatibility. It is necessary for technology standards to require a compatibility standard test process for testing whether implementations which were developed on the basis of the standard specification, comply with standards. This study suggests an automated compatible standard test method and a test model under the ebook DRM standard technical specification.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.166-184
• /
• 1997

The Wondong caldea is a deeply eroded structure that offers spectacular exposures through the core and margins of a resurgent caldera. The Wondong Tuff and the postcollapse intrusions range from medium-silica rhyolite to rhyodacite in composition and the postcollapse lava and tuff, preresurgent and resurgent intrusions also range from medium-silica rhyolite to an-desite, which jump to gap dacite composition. The continuous compositional zonations generally define a large stratified magma system in the postcollapse and resurgent magma chamber. Isotopic and trace element evidence suggest that the compositional zonations might have resulted from the differentiations from crystal fractionations of a parental andesitic magma, accompanying a little contamination from the crustal assimilations near the chamber roof and wall. But chemically and isotopically distinct late intusions might have resulted from emplacement of any different magma batch.

• Journal of agricultural medicine and community health
• /
• v.16 no.2
• /
• pp.97-119
• /
• 1991

Korea has made a rapid economic development since the last three decades. This has helped Korea narrow the gap in health service differences in resource availability and in quality of care. However urban and rural differentials are still remarkable. This study has maintained that health status of rural residents is inferior to that of urban dwellers. Therefore, this study was carried out to develop policy measures for improving health services in rural areas. In order to achieve the objective of this study the authors collaborated closely and made field visits, interviews and conducted an extensive literature review regarding rural health services. The following policy options are recommended as a summary ; First, the quality of rural health personnel is a single most important factor influencing the level of rural health services. An innovative program for public health doctors to the internship and/or residency training program such as specialty board program of family medicine. Second, dissatisfaction regarding employment of public health doctors is problematic. More rational employment and deployment programs are needed to meet their personal desire. One way to do this is to make it wide open and competitive. Third this study shows how to increase physician productivity in the rural public health sector. Incentive system needs to be elaborated for the career development of rural health workers. University linked job opportunity as clinical professor is an example. Fourth, without straightening the function of health centers and subcenters, the future of rural health services is doomed to failure. Straightening primary health care is one way to enrich the program of public health facilities and reactivating the operation of health center/hospital is another. A close linkage of public facilities with private hospitals is a minimum requirement for the operation of health delivery system within a health district. Fifth, some measures are urgently required to enhance hospital services in medically underserved areas. Financial subsidy, tax exemption, long-term public loans and higher priority of health manpower deployment are some of them. Sixth, new health programs should be in tiated to meet changing needs of peoples in rural areas. Home health care program, hospice program, nursing home, residential program for the elderly are recommended.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.433-445
• /
• 2010

The aim of this study was to evaluate the fixation effect by connecting impression copings and to compare the three types of impression trays which were used in open tray impression technique. Experimental groups used 3 types of impression trays which are custom tray, plastic metal combination tray and polycarbonate stock tray. These three groups were subdivided into splinted and non-splinted impression copings group. The total number of experimental groups was six. 10 specimens were made for each group. We used 1-screw test, observing the specimen on which only one side abutment of reference framework was fixated with 20 Ncm. The gap between implant analogue and abutment of the other side was observed by stereo microscope. It was measured at 6 points in each specimen. Measuring value was selected when same result was revealed 3 times. Recorded data were statistically analyzed. Whether impression copings were splinted or not, there was no significant difference among custom tray group, plastic metal combination tray group, and polycarbonate stock tray group. Significant statistical difference in vertical fit discrepancy was found between splinted and non-splinted impression copings group with custom tray, plastic metal combination tray and polycarbonate stock tray (p<0.05).

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2015

Purpose - Several domestic telecommunication companies have made a considerable effort to continuously grow and survive, and they have strived to thrive in the midst of mature market competition. To overcome this challenging situation and to grow continuously, while still meeting customer needs that are becoming more diverse and complicated with the passage of time, extensive support for internal marketing is essential. Without such internal support, companies face serious limitations and market roadblocks. The communication industry is a high-level service industry and a basic communications industry characteristic is its significant dependence on the employees delivering the services. Therefore, entrepreneurs in the information/communications industry, as well as existing competitors, should look to satisfy external customers through critical investment in internal customers (employees). Therefore, it is important for research to examine how internal factors influence technology innovation and service quality, which are the key drivers for companies that are seeking leading market positions. Research design, data, and methodology - The purpose of this study is to analyze the relationship of technology innovation and perceived service quality with the internal marketing factors in the communication industry and to offer suitable and effective internal marketing suggestions. The independent variables of this study are internal communication, education and training, the support of the executives, reward systems, and empowerment. The dependent variables are technology innovation and perceived service quality. Utilizing these, this paper studies the influence of internal marketing factors on technology innovation and perceived service quality. Results - The study results revealed the following. First, the identified internal marketing factors have a positive effect on technology innovation. Among the five internal marketing factors, three had a significant effect on product innovation, empowerment, the support of executives, and education and training, in this order. Second, the internal marketing factors also had a positive effect on the process innovation of technology innovation. The marketing factors, the support of executives, empowerment, internal communication, and education and training, in this order, significantly affect process innovation. Third, technology innovation had a positive effect on perceived service quality. All of the five service quality factors, namely, tangibles, reliability, assurance, responsibility, and empathy, in this order, significantly affect product innovation. Additionally, tangibles, reliability, responsibility, empathy, and assurance, in this order, significantly affect process innovation. Fourth, product and process innovation significantly affect tangibles and reliability in technology innovation. To enhance tangibles and reliability, process innovation should first be enhanced. Fifth, product and process innovation significantly affect responsibility and empathy in technology innovation. To enhance the responsibility and empathy, process innovation should first be enhanced. Sixth, product and process innovation significantly affect assurance in technology innovation. To enhance the assurance, product innovation should first be enhanced. Conclusions - According to the results, a company's internal marketing factors have a positive and significant effect on technology innovation and, further, product and process innovation have a positive and significant effect on the perceived serviced quality.

• Journal of Science Education
• /
• v.37 no.2
• /
• pp.374-388
• /
• 2013

The purpose of this study was to investigate pre-service physics teachers' perceptions on the physics education major curriculum. We surveyed 15 junior, and 13 senior college students of physics education major in an university in southern part of Korea. Among them, 24 participants(86 %) took the physics 1 course in high school and 22 participants(79 %) chose the physics 1 in their Korea Scholastic Aptitude Test. The responses showed that the most necessary part in pre-service students' learning was the understanding of high school level physics(36 %), and the understanding of introductory level physics(29 %). In the wish list of courses to be open, high school level physics course was ranked first among seven options by 61 % of respondents. Also, there was some concurrence among respondents in opinion of the necessity for understanding introductory physics. Students felt difficulties in understanding it especially owing to the lack of problem solving skill and comprehension. They added that the sufficient explanation of core concepts should be the first action in the innovative plan. Most participants of pre-service physics teachers hoped to have the revised major curriculum which could help their understanding of high school level or introductory level of physics. However, there was a gap of opinions between the group of students with completion of the high school physics 1 & 2 course and those with non-completion of them. The approach of changing major curriculum with consideration of learners' needs was recommended because the number of students with completion of the high school physics course would probably be decreasing rapidly under these circumstances such as the application of new national curriculum, the reduction of the number of the elective courses in Korea Scholastic Aptitude Test and so on.