• Journal of the Korean institute of surface engineering
• /
• v.55 no.2
• /
• pp.84-90
• /
• 2022

With the growing interest in energy storage and conversion systems including secondary batteries, capacitors, and water electrolysis, various electrode materials are being developed to improve the energy efficiency. Among them, graphene is regarded as one of the promising candidates owing to its exceptional properties - large surface area, and excellent electrical conductivity. Herein, we report a facile one-step electrochemical approach to synthesize exfoliated graphene/Fe oxide compound. The effect of experimental conditions - the types of applied voltage, kinds of counter electrodes, acidity of electrolyte on the synthesis of graphene/Fe oxide compound is investigated.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.579-583
• /
• 1992

Stereoselective synthesis of farnesol, (2E, 6E)-3,7,11-trimethyldodeca-2,6,10-tiren-1-ol(1), was carried out using 5-bromo-2-methylpent-2-ene(2) as a starting material. After conversion of 5-bromo-2-methylpent-2-ene(2) to the corresponding iodide compound, 5-(4-methylpent-3-enyl)-2,3-dihydrofuran(4) was obtained by alkylation of 5-lithio-2,3-dihydrofuran with 5-iodo-2-methylpent-2-ene. Ni(0)-catalyzed coupling reaction of the dihydrofuran 4 with MeMgI was proceeded to give (3E)-4,8-dimethylnona-3,7-dien-1-ol(5) in 72% yield. The resultant homoallylic alcohol 5 was converted to the (5E)-6,10-dimethylundeca-5,9-dien-2-one(8) in 4 steps. Compound 8 was condensed with dimethylmethoxycarbonylmethylphosponate in benzene follwed by $NaBH_4$ reduction in EtOH to yield (2E, 6E)-3,7,11-trimethyldodeca-2,6,10-trien-1-ol(1). Ni(0)-catalyzed coupling reaction of MeMgI with dihydrofuran 4 was a key step in this synthesis of farnesol(1).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.398-402
• /
• 2012

Synthesis of $Li_2MnSiO_4$ was attempted by the conventional solid-state reaction method, and the phase formation behavior according to the change of the calcination condition was investigated. When the mixture of the three source materials, $Li_2O$, MnO and $SiO_2$ powders, were used for calcination in air, it was difficult to develop the $Li_2MnSiO_4$ phase because the oxidation number of $Mn^{2+}$ could not be maintained. Therefore, two-step calcination was applied: $Li_2SiO_3$ was made from $Li_2O$ and $SiO_2$ at the first step, and $Li_2MnSiO_4$ was synthesized from $Li_2SiO_3$ and MnO at the second step. It was easy to make $Li_2MnSiO_3$ from $Li_2O$ and $SiO_2$. $Li_2MnSiO_4$ single phase was developed by the calcination at $900^{\circ}C$ for 24 hr in Ar atmosphere as the oxidation of $Mn^{2+}$ was prevented. However, the $Li_2MnSiO_4$ was ${\gamma}-Li_2MnSiO_4$, one of the polymorph of $Li_2MnSiO_4$, which could not be used as the cathode materials in Li-ion batteries. By applying the additional low temperature annealing at $400^{\circ}C$, the single phase ${\beta}-Li_2MnSiO_4$ powder was synthesized successfully through the phase transition from ${\gamma}$ to ${\beta}$ phase.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.343-348
• /
• 1999

The iron silicide films were prepared by chemical vapor deposition method using rf-plasma in variations of substrate temperature. rf-power, and ratio of $SiH_4$ and Fe-precursor. While iron silicide films are generally grown by ion beam synthesis (IBS) method of multi-step process, it is confirmed that iron silicide or $\beta$-phase consolidated $Fe_aSi_bC_cH_d$ was formed by one-step process in this study. The characteristics of films is variable because the different amounts of carbon and hydrogen was involved in the films as a function of dilute ratio of Fe-precursors and silane. It was shown that the different characteristics of films in carbon and hydrogen following the ratio of Fe-precursor and silane. The optical gap energy of films fabricated according to substrate temperature was invariant because active site brought in desorption of hydrogen was limiled. When rf-power was above 240 watt, the optical gap energy turned out to have high values because of dangling bonds increased by etching.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.245-250
• /
• 2007

Dense nanostructured $2MoSi_{2}-SiC$ composites were synthesized by the pulsed current activated combustion synthesis (PCACS) method within 3 minutes in one step from mechanically activated powders of $Mo_{2}C$ and 5Si. Simultaneous combustion synthesis and densification were accomplished under the combined effects of a pulsed current and mechanical pressure. Highly dense $2MoSi_{2}-SiC$ with relative density of up to 96% was produced under simultaneous application of a 60 MPa pressure and the pulsed current. The average grain size of $MoSi_{2}$ and SiC were about 120 nm and 90 nm, respectively. The hardness and fracture toughness values obtained were 1350 $kg/mm^{2}$ and 4 $MPa{\cdot}m^{1/2}$, respectively.

• Membrane Journal
• /
• v.30 no.6
• /
• pp.420-432
• /
• 2020

Random copolymers made of both 'polymer of intrinsic microporosity (PIM-1)' and Ellagic acid were prepared for the first time by a facile one-step polycondensation reaction. By combining the highly porous and contorted structure of PIM (polymers with intrinsic microporosity) and flat-type hydrophilic ellagic acid, the membranes obtained from these random copolymers [(PIM-co-EA)-x] showed high CO2 permeability (> 4516 Barrer) with high CO2/N2 (> 23~26) and CO2/CH4 (> 18~19) selectivity, that surpassed the Robeson upper bound (2008) for both pairs of the gas mixture. Incorporation of flat-type ellagic acid into the PIM-1 not only enhances the gas permeability by disturbing the kinked structure of PIM-1 but also increases the selectivity of CO2 over N2 and CH4, due to an increase of rigidity and polarity in the resultant copolymer membranes.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.767-771
• /
• 1999

Poly(ester-imide)(PEI) for the electrical insulation coating was synthesized and evaluated with one-step method as well as two-step method. For the synthesis of poly(ester-imide), imide repeat unit of N,N'-(4,4'-diphenylmethane) bistrimellitimide(DID) was initially made from trimellitic anhydride(TMA) and methylene dianiline(MDA), followed by the second stage reaction of esterification. One-step reaction was performed by reaction of TMA, MDA, dimethyl terephthalate(DMT), ethylene glycol(EG), and 1,3,5-tris-(2-hydroxy ethyl) isocyanurate(THEIC) in m-cresol solvent at a time. The synthesized poly(ester-imide) was cured with xylene, P-5030K(phenol-formaldehyde resin), TK-8(TDI type blocked polyisocyanate) and tetrapropyltitanate(TPT). It was found that the content of hydroxyl group, amount of DMT, and imide repeat unit played important role for the properties of electrical insulation coating film.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2006.11a
• /
• pp.127-130
• /
• 2006

Coenzyme Q10(CoQ10) is a biological quinine compound that is widely found in living organisms including yeast, plants, and animals. CoQ10 has two major physiological activities:(a)mitochondrial electron-transport activity and (b )antioxidant activity. Various clinical applications are also available: Parkinson's disease, Heart disease, diabetes. Because of its various application filed, the market size of CoQ10 is continuously expanding all over the world. A Japanese company, Nisshin Pharma Inc. is the first industrial producer of CoQ10(1974). CoQ10 can be produced by fermentation and chemical synthesis. In several companies, these two methods are used for the production of CoQ10:chemical synthesis - Yungjin, Daewoong, Nishin Parma; fermentation - Kaneka, Kyowa, Yungjin, etc. Researchs in microbial production of CoQ10 have several steps: screening of producing microorganisms, strain development, fermentation process, purification process, scale-up process, plant production. Several strategies are available for the strain development : Random mutation and screening, directed metabolic engineering. For the optimization of fermentation process, various conditions (nutrient, aeration, temperature, culture type, etc.) are considered. Purification is one of the most important step because the quality of final products entirely depends on its purity. The production cost will be reduced and the quality of the CoQ10 will be impoved by continuous researches in strain development, fermentation process, purification process.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2016-2022
• /
• 2013

Ionically modified ${\beta}$-cyclodextrins, which have excellent water-solubility, have been interested in purification technology as well as drug carrier system. The present study summarizes the synthesis and characterization of cationic and anionic ${\beta}$-cyclodextrin (${\beta}$-CyD) products using by polycondensation. The oligo (${\beta}$-CyD)s are synthesized from ${\beta}$-CyD, epichlorohydrin (EP) and choline chloride (CC; for cationic polymer) or chloroacetic acid (CAA; for anionic polymer) through one step polycondenstaion process. Unlike the previous studies, we successfully purified the ionic ${\beta}$-CyD condensation products from the ${\beta}$-CyD reaction mixtures and accomplished a great level of structural analysis. The detailed structural analysis of these ionic ${\beta}$-CyD compounds is done by $^1H$ NMR, MALDI-TOF as well as GPC analysis and confirms the formation of oligomers with a few units of ${\beta}$-CyD. We found that the sequence of reactant addition also could effect on the molecular weight of the resulting product as well as the molar ratio of the reactants. Finally, we used the cationic and anionic ${\beta}$-CyD oligomers for fabricating multilayer films by layer-layer process.

• KSBB Journal
• /
• v.19 no.5
• /
• pp.358-362
• /
• 2004

Characteristics of cell growth and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] synthesis was investigated through flask and batch cultures of Alcaligenes latus and Comamonas acidovorans. The specific growth rate of C. acidovorans increased with yeast extract concentration and decreased with 1,4-butanediol concentration. Optimum glucose concentration for growth of C. acidovorans was 20 g/L. In one-step flask cultures of C. acidovorans, final dry cell weight and PHA content decreased with the ratio of 1,4-butanediol to glucose, while the 4HB fraction in copolymers gradually increased to 100 $mol\%$ with an initial 1,4-butanediol concentration of 20 g/L as single carbon source. The specific growth rate of A. latus decreased with v-butyrolactone concentration and optimum sucrose concentration for growth was 10 g/L. In batch cultures of A. latus, 4HB fraction increased with initial v-butyrolactone concentration. P(3HB-co-4HB) with 19 $mol\%$ 4HB was obtained when the initial ratio of v-butyloractone (g/L) to sucrose (g/L) was 10 : 10.