• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.913-922
• /
• 2016

This study attempted to measure molecular weight (MW) of melamine-urea-formaldehyde (MUF) resins prepared by two different synthesis methods: the one-step MUF resins were synthesized in one batch procedure, while the two-step MUF resins were prepared by a physical mixing of urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized in a separate procedure. The properties of medium density fiberboard (MDF) panels bonded with two types of MUF resins were also investigated. MWs of these MUF resins were measured using gel permeation chromatography (GPC). In addition, this study measured the MWs of one-step MUF resin during its synthesis procedure. The performance of two types of MUF resins was evaluated by determining properties of MDF panels prepared in laboratory. As the synthesis procedure progressed, both number average MW ($M_n$) and weight average MW ($M_w$) of one-step MUF resin gradually increased, while the polydispersity index (PDI) decreased. And low Mw species of the resin predominantly decreased as the synthesis step progressed. The one-step MUF resin showed greater $M_n$ and $M_w$ than those of the two-step ones even though the PDI values of both resins were very similar each other. As expected, the one-step MUF resin resulted in better properties of MDF panels than those of two-step resins. In particular, the one-step MUF resin provided better internal bond (IB) strength and thickness swelling (TS) with MDF panels than those of two-step ones, indicating better water resistance of the one-step resin. These results suggest that the preparation method of MUF resins have a great impact on the MW and final panel properties.

• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.254-256
• /
• 1989

Synthesis of spiro 1, 4-dihydropyridines by a novel and facile one step method is reported. Structures and reaction are also reported with a support by another synthetic routes.

• Journal of Powder Materials
• /
• v.8 no.4
• /
• pp.231-238
• /
• 2001

We combined Field-Activated Combustion Synthesis(FACS) with mechanical pressure to produce dense WC-20 vol.%Co composite in one step. The hardness, the fracture toughness and the relative density of the dense WC-20 vol.%Co were investigated. Under the application of 60 MPa pressure and 3000A current on the reactants, the relative density of WC-20 vol.%Co composite was 99.4%. The fracture toughness and hardness were $9.4 MPa.m^{1/2}$ and $1672kg\textrm{mm}^2$ respectively. The fracture toughness and hardness of WC-20 vol.%Co composite produced by FAPACS were lower than that of nanostructured composite, but similar to commercial ones. Therefore we concluded that the FAPACS method which can produce WC-20 vol.%Co within several minutes in one step is superior to conventional ones.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.253-253
• /
• 1999

Dense WC-10 vol.%Co composite was simultaneously synthesized with field-activated and pressure-assisted combustion synthesis (FAPACS) within several minutes in one step from elemental powders of W, C and Co. Combustion synthesis was carried out under the combined effect of an electric field and mechanical pressure. Under the application of 60MPa pressure and 3000A current on the reactants, the relative density of WC-10 vol.%Co composite was 98.4%. The fracture toughness and hardness of WC-10 vol.%Co were 8.6 MPa·$m^{1/2}$ and 1900 kg/mm², respectively.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2011

This study surveyed on the synthesis of one-step type hydrophilic non-porous PU resin and the physical property of the coated fabric for the garment. Three kinds of chain extender such as MEG, 1,4-BD and NPG were used for the preparation of one-step type hydrophilic non-porous PU resin in order to examine the effect of chain extender on the physical properties of PU-coated fabric. And the effects of isocyanate on the physical properties of PU coated fabric were surveyed by mixing with various TDI and MDI ratios. In addition, the physical properties of the coated fabric treated with one-step type hydrophilic non-porous PU resin were examined according to the pre-treatment conditions such as cire finishing. Finally, the washing durability of the coated fabrics was assessed. The coated fabrics treated with PU resin synthesized with PEG1000, MEG and TDI/MDI (6/4) showed the best physical properties. Considering the pre-treatment conditions, best performance of hydraulic pressure, water vapor permeability, and water repellency were obtained with top roller rotation ratio of 150% under 50 ton pressure at $170^{\circ}C$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.268-269
• /
• 2014

나노입자 담지 탄소소재는 촉매재료로써 다양하게 응용되고 있으며, 이들 재료의 공정수를 획기적으로 줄이고자 솔루션 플라즈마라는 새로운 공정을 이용하여 One-Step으로 합성하는데 성공하였다. 합성된 재료의 경우 1~3nm의 미세한 나노입자가 탄소소재위에 균일하게 분산되어 있는 것을 확인 할 수 있었고, 촉매 활성 역시 매우 뛰어남을 확인 할 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.95-99
• /
• 2008

This paper proposes a new minimal resource high-level synthesis algorithm for low power design automation. The proposed algorithm executes an efficient approach to minimize the power consumption of the functional units in a circuit during the high level synthesis. In this paper, we visit all control steps one by one to reduce the switching activity in CDFG. The register sharing algorithm determines the minimum register after the life time analysis of all variable. According to property of input signal for functional unit, the proposed method visits all control step one by one and determines the resource allocation with minimal power consumption at each control step in a greedy fashion. The effect of the proposed algorithm has been proved through various filter benchmark to adopt a new scheduling and allocation algorithm considering the low rover.

• Journal of the Korean Chemical Society
• /
• v.60 no.4
• /
• pp.245-250
• /
• 2016

An improved protocol on the synthesis of thiazolo[3,2-a]pyrimidine-6-carboxylate derivatives are reported. Previously, the thiazolo[3,2-a]pyrimidine-6-carboxylate derivatives were prepared in a two-step procedure. Under the improved procedure, the thiazolo[3,2-a]pyrimidine-6-carboxylate derivatives was readily prepared in a one-step reaction. This procedure was found to be more efficient than the previous protocol and also compared to the ultrasound bath and conventional heating methods in terms of yield and reaction time.

• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.108-117
• /
• 2003

WC and dense WC-10 vol%Co materials with grain size of~1${\mu}m$ were synthesized by high-frequency induction heated combustion synthesis (HFIHCS) method in one step from elemental powders of W, C and Co within several minutes. Simultaneous combustion synthesis and densification were accomplished under the combined effects of an induced current and mechanical pressure. In the absence of cobalt additive, WC can be formed, but its relative density was low (about 73%) under simultaneous application of a 60 MPa pressure and the induced current. However, in the presence of 10 vol.%Co, the relative density increased to 99% under the same experimental condition. The percentages of the total shrinkage occurring before and during the synthesis reaction of WC-10 vol.%Co were 5% and 51%, respectively. The fracture toughness and hardness values of WC-10 vol.%Co were 10 MPa . m$^{1/2}$ and 1840 kg/$mm^2$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.475-476
• /
• 1995