• Clean Technology
• /
• v.28 no.4
• /
• pp.316-322
• /
• 2022

The flow pattern at the inlet of the catalyst layer in a selective catalytic reduction (SCR) system is one of the key parameters influencing the performance of the denitrification process. In the curved diffusing parts between the ammonia injection grids and the catalyst layers, guide vanes are installed to improve flow uniformity. In the present study, a numerical simulation has been performed to investigate the effect of the geometrical configuration of the guide vanes on the aerodynamic characteristics of a denitrification facility. This application has been made to the existing SCR process in a large-scaled coal-fired power plant. The flow domain to be solved covers the whole region of the flow passages from the exit of the ammonia injection gun to the exit of the catalyst layers. ANSYS-Fluent was used to calculate the three-dimensional steady viscous flow fields with the proper turbulence model fitted to the flow characteristics. The root mean square of velocity and the pressure drop inside the flow passages were chosen as the key performance parameters. Four types of guides vanes were proposed to improve the flow quality compared to the current configuration. The numerical results showed that the type 4 configuration was the most effective at improving the aerodynamic performance in terms of flow uniformity and pressure loss.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2022

In recent years due to the development of urban and underground space, the number of ground disasters is increasing, and it is also leading to social problems. To solve the problem, a grouting method is generally used. However, the grouting method has material (grout) limitations in permeability, gelation properties and tensile resistance. Therefore, research on grout materials mixed with fibers is actively carried out to improve the problems. However, in the actual ground injection process, many difficulties have been faced causing the blockage of the inlet port and the injection tube. In this study, 'CNT-mixed grout material' was developed using CNT powder that can reinforce the tensile strength of soils. The uniaxial compressive and tensile strength tests were performed to obtain the optimal content and mechanical properties of the CNT Powder-mixed grout. It was found that the optimal CNT powder content is 0.5% that gives the average maximum strength. A one-dimensional injection test and the bulb formation test were carried out, and it was identified that the injection rate and bulb form could be controlled by pressure and mixing ratio. Field application of the CNT-Mixed grout is simulated using numerical analysis of slopes, foundations, and tunnels reinforced in several types. The positive effect of reducing plastic ranges and settlements was confirmed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.211-221
• /
• 2022

Recently, the demand for the cultivation of upland soil has been increasing, and the rate of conversion of paddy soil into upland soil is also increasing. Theincrease in uneven precipitation due to climate change has resulted in dramatic effects of waterlogging stress on upland crops. Therefore, the present study was conducted to investigate the changes in growth characteristics and the expression patterns of proteins at the two-leaf stage of adzuki beans. The domestic cultivar, Arari (Miryang No. 8), was used to test waterlogging stress. At the two-leaf stage of adzuki beans, plant height slightly decreased androot fresh weight showed significant changes after 3 days of waterlogging treatment. Chlorophyll content was also significantly different after 3 days of waterlogging treatment compared to its content in control plants. Using two-dimensional gel electrophoresis, more than 400 protein spots were identified. Twenty-one differentially expressed proteins from the two-leaf stage were analyzed using linear trap quadrupole-Fourier transform-ion cyclotron resonance mass spectrometry. Of these 21 proteins, 9 were up-regulated and 12 were down-regulated under waterlogging treatment. Protein information resource (https://pir.georgetown.edu/) categories were assigned to all 49 proteins according to their molecular function, cellular component localization, and biological processes. Most of the proteins were found to be involved in the biological process, carbohydrate metabolism and were localized in chloroplasts.

• Journal of Service Research and Studies
• /
• v.11 no.4
• /
• pp.21-42
• /
• 2021

This study was conducted to derive a Korean model that can permanently maintain and develop Korea. After analyzing Korean society, especially modern Korea, which was the foundation of the founding of the Republic of Korea, a Korean model that can lead Korean society as a sustainable society in human society was derived. The situation of Korea and Koreans was analyzed from a fundamental level. We analyzed the root causes of deepening division and conflict and vague concepts of freedom and justice, and presented a Korean model of the Republic of Korea based on the founding ideology and constitutional spirit of the Republic of Korea to solve these problems. The necessary conditions for being a Korean were derived from the founding ideology and constitutional spirit of the Republic of Korea, the indigenous ideology of Korea, and the fashion and lifestyle of Koreans, derived. In addition, basic axioms for the Korean model were presented, and the structure of the Korean model was designed based on this. The Korean model is presented so that Korean society can lead the human society and be happy for a long time. Reflecting the results of in-depth analysis of the ideological foundations of modern Koreans, a new long-term sustainable structure for Koreans with various ideologies to live well together was proposed. The new Korean model was named the service-oriented Korean model. This is because it is a model centered on thorough checks and balances between all opponents, because it is a multidimensional dynamic Korean model rather than a simple linear one-dimensional Korean model, and because it is a Hwajaengtaeguk model that accurately expresses the identity of Koreans. It was proposed as a model for the sustainable development of Korean society. A follow-up study on specific Korean education programs is needed in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3B
• /
• pp.315-321
• /
• 2008

Recently, in the light of environments and utilization, countermeasures to preserve beaches in coastal area are required without depending on such as jetties and breakwaters. The necessity of integrated sand management including not only coastal sediment but also sediment discharge from hinterland rivers is increased so as to establish long-term counterplan for sediment transport. In this regard, the following subjects are examined in this study; efficient ways for discharged sand to be transported from a river to the neighboring coast, the river terrace occurrence and its growth at the river delta, measures to improve storage efficiency of the discharged sand and measures to prevent the sand resources from being discharged into the deep sea during flooding. In recent, A jetty of 260 m length was constructed at Namdae River mouth in the year of 2005 as a countermeasure against the occurrence of sand-bar at river mouth and its close. In this study, a series of numerical experiments were carried out to investigate the characteristics of sediment transport and morphological change due to the construction of jetty at the entrance of Namdae River mouth. Firstly, The sand discharge from Namdae River is quantified by one-dimensional numerical analysis assuming the mixed sand of three different particle diameters. Then, in order to understand the transport behavior of the sand discharge from river and river mouth phenomena the numerical experiments were then conducted to examine the flow behaviors of river efflux and wind generated circulations in coastal area. And, after establishing the numerical model system, which predicts the sea bed changes obtained from the flux model combining with the wave propagation, wave-induced currents and sediment transport models, the sediment transport in the vicinity of Namdae River mouth is analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1C
• /
• pp.43-52
• /
• 2006

Despite several constitutive models have been proposed and applied, it is still difficult to choose a suitable model and to estimate adequate analysis parameters. Furthermore, a cyclic shear behavior under the volume change caused by the seepage is more complex. None of the constitutive model is available at present in the expression of the cyclic behavior of soil under an additional volume change condition by seepage. Therefore, a new geotechnical hybrid simulation system which can control the pore water immigration was developed. The system enables a quantitative evaluation of the residual deformation such as lateral spreading and settlement caused by the liquefaction. The seismic responses in a one-dimensional slightly inclined multilayered soil system are taken into consideration, and the soils are governed by both equation of motion and the continuity equation. Furthermore, the estimation and the selection of the soil parameter for the representation of the strong nonlinearity of the material are not required, because soil behaviors under the earthquake motions are directly introduced instead of a numerical soil constitutive model. This paper presents the concept and specifications of the system. By applying the system to an example problem, the permeability effect on the seismic response during cyclic shear is studied. The importance of the volume change characteristics of sandy soil during and after cyclic shear is shown in conclusion.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Korean Journal of Radiology
• /
• v.22 no.3
• /
• pp.464-475
• /
• 2021

Objective: This study aimed to evaluate the tumor doubling time of invasive lung adenocarcinoma according to the International Association of the Study for Lung Cancer (IASLC)/American Thoracic Society (ATS)/European Respiratory Society (ERS) histologic classification. Materials and Methods: Among the 2905 patients with surgically resected lung adenocarcinoma, we retrospectively included 172 patients (mean age, 65.6 ± 9.0 years) who had paired thin-section non-contrast chest computed tomography (CT) scans at least 84 days apart with the same CT parameters, along with 10 patients with squamous cell carcinoma (mean age, 70.9 ± 7.4 years) for comparison. Three-dimensional semiautomatic segmentation of nodules was performed to calculate the volume doubling time (VDT), mass doubling time (MDT), and specific growth rate (SGR) of volume and mass. Multivariate linear regression, one-way analysis of variance, and receiver operating characteristic curve analyses were performed. Results: The median VDT and MDT of lung cancers were as follows: acinar, 603.2 and 639.5 days; lepidic, 1140.6 and 970.1 days; solid/micropapillary, 232.7 and 221.8 days; papillary, 599.0 and 624.3 days; invasive mucinous, 440.7 and 438.2 days; and squamous cell carcinoma, 149.1 and 146.1 days, respectively. The adjusted SGR of volume and mass of the solid-/micropapillary-predominant subtypes were significantly shorter than those of the acinar-, lepidic-, and papillary-predominant subtypes. The histologic subtype was independently associated with tumor doubling time. A VDT of 465.2 days and an MDT of 437.5 days yielded areas under the curve of 0.791 and 0.795, respectively, for distinguishing solid-/micropapillary-predominant subtypes from other subtypes of lung adenocarcinoma. Conclusion: The tumor doubling time of invasive lung adenocarcinoma differed according to the IASCL/ATS/ERS histologic classification.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.1
• /
• pp.20-28
• /
• 2020

Objectives : The aim of this study was to compare psychosocial characteristics of the functional gastrointestinal disorders FGID group, non-FGID group, and control group and determine factors affecting the QOL of patients with FGID. Methods : 135 patients diagnosed with FGID were selected. 79 adults had no observable symptoms of FGID (control group) and 88 adults showed symptoms of FGID (non-FGID group). Demographic factors were investigated. The Korean-Beck Depression Inventory-II, Korean-Beck Anxiety Inventory, Korean-Childhood Trauma Questionnaire, Multidimensional Scale of Perceived Social Support, Connor-Davidson Resilience Scale, Patient Health Questionnaire-15 and WHO Quality of Life Assessment Instrument Brief Form were used to assess psychosocial factors. A one-way ANOVA was used to compare differences among groups. Pearson correlation test was performed to analyze the correlation of psychosocial factors and QOL of the FGID group. Further, a hierarchical regression analysis was conducted to determine factors affecting the QOL of the FGID group. Results : Between-group differences were not significant in demographic characteristics. Depression (F=48.75, p<0.001), anxiety (F=14.48, p<0.001), somatization (F=24.42, p<0.001) and childhood trauma (F=12.71, p<0.001) were significantly higher in FGID group than in other groups. Social support (F=39.95, p<0.001) and resilience (F=17.51, p<0.001) were significantly lower in FGID group than in other groups. Resilience (β=0.373, p<0.01) was the most important explanatory variable. The explained variance was 47.2%. Conclusions : Significantly more symptoms of depression, anxiety, childhood trauma, and somatization were observed for the FGID group. This group also had less social support, resilience, and quality of life than the non-FGID and control groups. The key factor for quality of life of the FGID group was resilience.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.3 no.1
• /
• pp.51-75
• /
• 2023

Relying on disciplinary competitions to enhance college students' innovation and entrepreneurship is one of the specific paths to explore the reform of innovation and entrepreneurship education in colleges and universities. This paper conducts an empirical study on the practice of disciplinary competitions among Chinese university students, the problems of innovation and entrepreneurship education in Chinese universities and the impact of disciplinary competitions on innovation and entrepreneurship among Chinese university students, using university students in Chinese universities as the respondents. The data collected online and offline were analysed using SPSS26 statistical software. The results of the analysis show that Chinese university students show a high level of interest in innovation and entrepreneurship competitions and that there are some differences in the level of interest in innovation and entrepreneurship competitions among university students of different academic levels. More than half of Chinese university students have participated in innovation and entrepreneurship competitions and the initiative of participating in innovation and entrepreneurship competitions varies by grade. The biggest problem facing innovation and entrepreneurship education in schools is the lack of professional innovation and entrepreneurship teachers, followed by the lack of guidance on innovation and entrepreneurship-related policies, and the unreasonable reward system, which makes teachers and students less motivated to innovate and entrepreneurship. Through one-dimensional linear regression analysis, it is found that the degree of attention to innovation and entrepreneurship among college students affects college students' entrepreneurial awareness and entrepreneurial practice; the degree of initiative of college students' innovation and entrepreneurship competition affects college students' entrepreneurial effect; and the degree of initiative of college students' innovation and entrepreneurship competition affects college students' entrepreneurial practice.