• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.92-94
• /
• 2003

In superconductive digital logic circuits, D2 cells can be used to compose a decoder an important component of an Arithmetic Logic Unit (ALU). In this wor, we simulated D2 cell by using WRspice. D2 cell has one input, one switch input, and two outputs (output1 and output2). D2 cell functions in such way that output1 follows the input and output2 is the complement of the input data, when the switch input is "0, ". However, when there is a switch input "1, " the opposite output signals are generated. In this paper, we optimized a D2 cell by using WRspice, and obtained the minimum margin of 26%. Our optimized D2 cell will play a key role in the ALU fabrication.the ALU fabrication.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.123-126
• /
• 2003

RSFQ (Rapid Single Flux Quantum) circuits are used in many practical applications. RSFQ DFFC (Delay Flip-Flop with complementary outputs) circuits can be used in a RAM, an ALU (Arithmetic Logic Unit), a microprocessor, and many communication devices. A DFFC circuit has one input, one switch input, and two outputs (output l and output 2). DFFC circuit functions in such way that output 1 follows the input and output 2 is the complement of the input when the switch input is "0." However, when there is a switch input "1."the opposite output signals are generated. In this work, we have designed an RSFQ DFFC circuit based on 1 ㎄/$\textrm{cm}^2$ niobium trilayer technology. As circuit design tools, we used Xic, WRspice, and Lmeter After circuit optimization, we could obtain the bias current margins of the DFFC circuit to be above 32％.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.285-286
• /
• 2015

In this letter, a simple control method of the HB LLC converter with one additional switch and capacitor in the primary side is proposed for wide-input-voltage applications with the hold-up time conditions. At nominal input, since the proposed method enables the HB LLC converter to operate with large transformer magnetizing inductance, it can reduce the conduction and switch turn-off losses in the primary side, which makes a high efficiency. On the other hand, during the hold-up time, since the proposed method increases the resonant capacitance by turning on one additional switch, the HB LLC converter can obtain high voltage gain.

• 대한전자공학회논문지TC
• /
• 제48권1호
• /
• pp.97-101
• /
• 2011

개인 휴대통신의 서비스 대역에 대응하는 4중 대역 p-HEMT SP6T 스위치를 구현하였다. 낮은 삽입손실과 높은 격리특성을 달성하기 위하여, 트랜지스터 단위소자의 최적화를 통해 On-Off간 상호 보완적 관계를 고려하였으며, 특히 송수선간 격리 특성의 경우, 큰 커패시터 삽입을 통하여 우수한 격리 특성을 달성하는 동시에 단일의 전압제어와 백비아를 사용한 접지를 통해 소형화를 달성하였다. 구현된 SP6T 스위치는 $950um{\times}100um$의 크기를 가지며 공정상 게이트 우물의 오류를 감안할 때, 각 주파수 대역에서 우수한 삽입손실 및 격리특성을 확인 할 수 있었다.

• ETRI Journal
• /
• 제31권6호
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.397-403
• /
• 2016

Generally, an electrical distribution configuration is a radial system with one-way current in a distribution management system (DMS). All feeders in a DMS have tie-switches to make radial system. Sometimes, DMS should change a tie-switch for operation. In that case, the tie-switch has to be closed first; then a switch is opened as another tie-switch in order to prevent blackout for customers. At the moment when the tie-switch is closed, distribution system is operated in a loop state, not radial. Before the loop operation, DMS operator has to check any expected events for stable distribution system operation; and the most important event is a mis-operation of a protection relay. In addition, DMS operator should check voltage profile violation but a calculation method of section voltages had not been used. Thus, this paper proposes a calculation method of section voltages at a loop operation in a DMS. The proposed calculation algorithm is verified by Matlap Simulink.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.157-165
• /
• 2006

본 논문에서는 출력 버퍼형 탠덤크로스포인터 멀티캐스트 ATM 스위인 MTCOS 스위치를 제안한다. MTCOS 스위치는 라우팅 구조가 간단한 다수의 크로스포인터 스위치 패브릭으로 구성된 TCSF와 효율적 멀티캐스팅을 위한 집중화기 출력 버퍼로 구성된다. TCSF는 셀프 라우팅 크로스바 스위치가 갖는 셀 지연 편차 문제를 개선하고, 또한 하나의 입력에서 다수 출력 포트들로 다수의 동시 경로를 제공하며, 간단한 소프트웨어적 설정을 통해 다중 채널 스위칭을 제공하며, 확장성, 고성능, 모듈화 특성을 갖는다. MTCOS에서 제공되는 공유 트래픽 집중화 및 출력 큐잉 방식은 다양한 멀티캐스트 트래픽에 대해 낮은 셀 손실율과 낮은 지연시간을 보인다. 또한 동일 Knockout 집중화율을 달성하기 위해 SCOQ와 Knockout 멀티캐스트 스위치 보다 낮은 하드웨어 복잡도를 갖는다. 해석적 및 컴퓨터 시뮬레이션을 통해 임의의 트래픽에 대해 제안된 스위치가 높은 성능을 달성할 수 있음을 보였다.

• 인터넷정보학회논문지
• /
• 제8권5호
• /
• pp.161-170
• /
• 2007

본 논문은 데이터 메모리 평면과 스위칭 평면을 분리하여 패킷 데이터의 저장과 메모리 주소 포인터의 스위칭이 병렬적으로 처리 가능하며 IP 패킷의 가변 길이 스위칭이 가능한 새로운 스위치 구조를 제안한다. 제안한 구조는 기존 VOQ방식의 복잡한 중재 알고리즘이 필요 없으며 출력 큐 방식의 스위치에서만 적용되고 있는 QoS를 입력 큐에서 고려한다. 성능분석 결과 제안한 구조는 기존의 공유 메모리 기반의 구조들에 비해 상대적으로 낮은 평균 지연 시간을 가지며 스위치의 크기가 증가하더라도 일정한 지연 시간을 보장함을 확인하였다.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.626-634
• /
• 2018

These days, widespread use of sensitive loads and distributed generators makes static transfer switch (STS) an essential component in power circuits to achieve a good power quality for AC Grids. In case of a short-circuit fault, previous STS cannot break the fault current. However, the proposed STS has the capability of breaking it quickly as a circuit breaker. Also if there are power quality problems such as Sag/Swell, the proposed STS can quickly transfers the load to the good quality source. Furthermore it is proved that the transfer time of the proposed STS is within one half of period of 3-phase source frequency regardless of the type of load. It is anticipated that the proposed STS may be utilized to realize many stable and reliable AC grid systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.31-37
• /
• 2004

In this paper, the analysis result of the switching surge in substation including GIS(Gas Insulated Switchgear) has been described using the EMTP(Electro Magnetic Transient Program) program. After performing the modeling of the input data, we have reviewed the energization overvoltages of GCB(Gas Circuit Breaker) without closing resistor in 345kV network, according to the conditions of simultaneously operating switch and statistically operating switch. Firstly, it can be known that the energization overvoltage of single line is higher than that of parallel energized line. Secondly, the maximum energization overvoltage obtained in statistics switch is higher than one in simultaneous switch. From these results, it can be known that the phase-to-earth energization overvoltages of $\alpha$-$\beta$ section are less than 2.2 p.u when closing resistor is eliminated. Therefore, it is possible to consider the circuit breaker eliminated the closing resistor in $\alpha$-$\beta$ section.