• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.160-168
• /
• 2017

In the past 10 years, the accidents caused by drowsy driving have occupied about 23% of all traffic accidents in Korea expressway network and this rate is the highest one among all accident causes. Unlike other types of accidents caused by speeding and distraction to the road, the accidents by drowsy driving should be managed differently because the drowsiness might not be controlled by human's will. To reduce the number of accidents caused by drowsy driving, researchers previously focused on the spot based analysis. However, what we actually need is a segment (link) and occurring time based analysis, rather than spot based analysis. Hence, this research performs initial effort by adapting link concept in terms of drowsy driving on highway. First of all, we analyze the accidents caused by drowsy in historical accident data along with their road environments. Then, links associate with driving time are analyzed using digital tachograph (DTG) data. To carry this out, negative binomial regression models, which are broadly used in the field, including highway safety manual, are used to define the relationship between the number of traffic accidents on expressway and drivers' behavior derived from DTG. From the results, empirical Bayes (EB) and potential for safety improvement (PSI) analysis are performed for potential risk segments of accident caused by drowsy driving on the future. As the result of traffic accidents caused by drowsy driving, the number of the traffic accidents increases with increase in annual average daily traffic (AADT), the proportion of trucks, the amount of DTG data, the average proportion of speeding over 20km/h, the average proportion of deceleration, and the average proportion of sudden lane-changing.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.168-176
• /
• 2005

Vibrio vulnificus, one of the marine bacterial pathogens causing septicemia, was detected using molecular methods, namely, PCR and/or Southern hybridization, and real-time PCR. Extracted and purified total DNAs by using commercial kits were used as templates for PCR. Multiplex-PCR was conducted by employing three sets of primers for the genes, hemolysin (vvhA), phosphomannomutase (pmm), and metalloprotease (vvpE), for V vulnificus virulence. The presence of DMSO ($5\%$) and BSA ($0.1\%$) in PCR reaction mixture improved a detection efficiency by higher PCR band intensities. TaqMan real-time PCR was carried out by using gene segment of vvhA as a target. Detection limit of PCR/Southern hybridization without enrichments was to be around $10^2\;cells\;g^{-1}$ of sample. However, those three methods using the enrichment at $35^{\circ}C$ in APW showed high sensitivity ($2\~10\;cells\;g^{-1}$ of sediments). Highly sensitive detection of V vulnificus by real-time PCR was achieved within $5\~6$ hr, whereas the detection by PCR/Southern hybridization required about 36 hr. Thus, it was evident that real-time PCR is the most rapid and efficient method for detecting V vulnificus in tidal flat sediments.

• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.281-286
• /
• 2009

Rhodiola sachalinensis is one of the most popular oriental medicines in East Asia. It is a perennial herb, belonging to the family Crassulaceae, which is mainly distributed in mountains at the altitudes of 1700-2500 m in Baek-Du mountain. Cultivation of this species for the production of medicine materials is not easy in nature, because of restrict habitats. In vitro production of roots can be applicable for the production of medicinal materials. Here, we investigated the optimal conditions for induction and proliferation of adventitious roots in in vitro culture system. Leaf, stem and root segments from R. sachalinensis were cultured on Murashige and Skoog(MS) medium supplemented with the various concentrations of IBA(Indole-3-butyric acid)(0.5, 1.0, 3.0, and 5.0 mg/L) and sucrose(10, 30, 50, and 100 g/L). The optimal explant for adventitious root induction was leaf segment. Induction of adventitious roots was highest on MS medium supplemented with 5.0 mg/L IBA and sucrose 30 g/L. In liquid culture, fresh weight of adventitious roots was highest(15.65 g) on 1/3 strength MS liquid medium supplemented with 5.0 mg/L IBA with 30 g/L sucrose. These results revealed the first attempt for the production of adventitious roots in R. sachalinensis.

• The Journal of Fisheries Business Administration
• /
• v.39 no.1
• /
• pp.87-114
• /
• 2008

The cultured tuna production which has suddenly expanded at the short time and the demand for it attract attention. Farming mode, distribution transactions, change of the market (domestic and international) and the price trend are reviewed from the Japan's position which is the biggest consuming country. This paper tries to describe the current status of the food system related to the cultured tuna. Japanese government began the development of the tuna culture technology in 1970. It was by the Fisheries Agency's project. Kinki University which is the large scale private university in Japan participated in the project. After that, 32 years have passed. Kinki University established the full farming of the bluefin tuna in August, 2002. On the other hand, in 1974, one Japanese private enterprise began its tuna farming business in Canada. Kinki University gave this company technical cooperation. Also, in the early stages of the 90s, as for the policy of the overseas fishery cooperation foundation, it supported the tuna farming business in Australia. It is very clear to understand that the long-term technological-development has supported the take-off scene of the tuna culture business not only in foreign countries but also in Japan. The total shipment scale of the cultured tuna expanded very much within about 10 recent years. However, the decrease of the wild tuna catch, the reinforcement of the fisheries regulation and the tuna body to dwarf are remarkable now. Under the condition as the mentioned above, Japan's tuna consumption, especially, in the market at the fatty meat of tuna of the cultured tuna is building up firm status. At present, the Mediterranean Sea coastal countries, Australia, Mexico and Japan have the tuna farming sites. Australia farms the southern bluefin tuna. The others do the bluefin tuna. About for 3 years, Japan farms the juvenile of the tuna. The global production areas are as follows. 8 coastal countries of the Mediterranean Sea; 18,000 tons (61 % of the cultured tuna quantity in foreign countries), Mexico; 4,500 ton (15%), Australia; 7,000 tons (24%). In 2003, Japan has 32 managements and 39 offices for tuna farming. In Japan, Kyushu and Okinawa district, the share shows itself as 80 % of the domestic production quantity. Especially, the share of Amami-oshima Island in Kagoshima Prefecture exceeds 60 %. Therefore, this island has the maximum production scale of Japan. The amount of supply of BT and SBT was 56,000 tons in 2004. In Abroad, the tuna farming business forms a fixed connection between the importer and the wholesaler which have their office in Japan. In the field of the capital composition, the payment in advance, transaction and the way of settlement, each maintains their fixed relation. The market conditions of the cultured tuna are supported by "the decline of price level" and "the expansion of the general public consumption segment". These lead a team merchandising, and it is supported by the fixed business connection of each. This makes the profit of each business which are on the cultured tuna distribution. However, they have competition on the power balance among them.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.755-768
• /
• 2002

We investigate the effect of the data skew of join attributes on the performance of a pipelined multi-way hash join method, and propose two new hash join methods with load balancing capabilities. The first proposed method allocates buckets statically by round-robin fashion, and the second one allocates buckets adaptively via a frequency distribution. Using hash-based joins, multiple joins can be pipelined so that the early results from a join, before the whole join is completed, are sent to the next join processing without staying on disks. Unless the pipelining execution of multiple hash joins includes some load balancing mechanisms, the skew effect can severely deteriorate system performance. In this paper, we derive an execution model of the pipeline segment and a cost model, and develop a simulator for the study. As shown by our simulation with a wide range of parameters, join selectivities and sizes of relations deteriorate the system performance as the degree of data skew is larger. But the proposed method using a large number of buckets and a tuning technique can offer substantial robustness against a wide range of skew conditions.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.450-462
• /
• 2009

So far, many methods for segmenting single images or video have been proposed, but few methods have dealt with multiple images with analogous content. These images, which we term consistent scene images, include concurrent images of a scene and gathered images of a similar foreground, and may be collectively utilized to describe a scene or as input images for multi-view stereo. In this paper, we present a method to segment these images with minimum user input, specifically, manual segmentation of one image, by iteratively propagating information via multi-level cues with adaptive confidence depending on the nature of the images. Propagated cues are used as the bases to compute multi-level potentials in an MRF framework, and segmentation is done by energy minimization. Both cues and potentials are classified as low-, mid-, and high- levels based on whether they pertain to pixels, patches, and shapes. A major aspect of our approach is utilizing mid-level cues to compute low- and mid- level potentials, and high-level cues to compute low-, mid-, and high- level potentials, thereby making use of inherent information. Through this process, the proposed method attempts to maximize the amount of both extracted and utilized information in order to maximize the consistency of the segmentation. We demonstrate the effectiveness of the proposed method on several sets of consistent scene images and provide a comparison with results based only on mid-level cues [1].

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.397-402
• /
• 1996

A clinical study of 36 cases of pulmonary tuberculosis that had had a surgical resection during the period of 13 years from January 1979 to December 1992 was performed in the Department of Thoracic and Cardiovascular Surgery, Chonbuk National University Hospital The ratio between male and female was 3.5 1 and the age of peak incidence was in the 2nd and 3rd decades. The common prodromal symptoms were chest pain (38.9 %) and hemoptysis or blood tinged sputum (36.1 %). Preoperative diagnostic examination of sputum positivity for AFB stain despite antituberculosis chemotherapy was noticed in 22.8 oyo . Surgical indications were destroyed lobe or segment with or without cavity (58.3 oyo), mass unable to differentiate from lung cancer (16.7 %), total destroyed lung (13.9 %), bronchostenosis with atelectasis and distal bronchiectasis (11.1 %). Types of resection were pneumonectomy in 16.7%, lobec omy and segmentectomy 2.7%, lobectomy 50 %, segmentectomy 27.8%, and wedge resection 2.7%. Postoperatively, pulmonary function Improved compared to the preoperative examination, although these changes were not statistically significant. One patient died of ulcerative colitis due to drug hypersensitivity, and the postoperative complications were remnant dead space in 11.1 %, spreading of tuberculosis in 5.5%, and empyema with BPF in 5.5%.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.2
• /
• pp.237-247
• /
• 2020

Objective : Fixation of the C1-2 segment is challenging because of the complex anatomy in the region and the need for a high degree of accuracy to avoid complications. Preoperative 3D-computed tomography (CT) scans can help reduce the risk of complications in the vertebral artery, spinal cord, and nerve roots. However, the patient may be susceptible to injury if the patient's anatomy does not match the preoperative CT scans. The intraoperative 3D image-based navigation systems have reduced complications in instrument-assisted techniques due to greater accuracy. This study aimed to compare the radiologic outcomes of C1-2 fusion surgery between intraoperative CT image-guided operation and fluoroscopy-guided operation. Methods : We retrospectively reviewed the radiologic images of 34 patients who underwent C1-2 fusion spine surgery from January 2009 to November 2018 at our hospital. We assessed 17 cases each of degenerative cervical disease and trauma in a study population of 18 males and 16 females. The mean age was 54.8 years. A total of 139 screws were used and the surgical procedures included 68 screws in the C1 lateral mass, 58 screws in C2 pedicle, nine screws in C2 lamina and C2 pars screws, four lateral mass screws in sub-axial level. Of the 34 patients, 19 patients underwent screw insertion using intraoperative mobile CT. Other patients underwent atlantoaxial fusion with a standard fluoroscopy-guided device. Results : A total of 139 screws were correctly positioned. We analyzed the positions of 135 screws except for the four screws that performed the lateral mass screws in C3 vertebra. Minor screw penetration was observed in seven cases (5.2%), and major pedicle screw penetration was observed in three cases (2.2%). In one case, the malposition of a C2 pedicle screw was confirmed, which was subsequently corrected. There were no complications regarding vertebral artery injury or onset of new neurologic deficits. The screw malposition rate was lower (5.3%) in patients who underwent intraoperative CT-based navigation than that for fluoroscopy-guided cases (10.2%). And we confirmed that the operation time can be significantly reduced by surgery using intraoperative O-arm device. Conclusion : Spinal navigation using intraoperative cone-beam CT scans is reliable for posterior fixation in unstable C1-2 pathologies and can be reduced the operative time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1102-1107
• /
• 2004

Fingerprint Recognition System is made up of Off-line treatment and On-line treatment; the one is registering all the information of there trieving features which are retrieved in the digitalized fingerprint getting out of the analog fingerprint through the fingerprint acquisition device and the other is the treatment making the decision whether the users are approved to be accessed to the system or not with matching them with the fingerprint features which are retrieved and database from the input fingerprint when the users are approaching the system to use. In matching between On-line and Off-line treatment, the most important thing is which features we are going to use as the standard. Therefore, we have been using “Delta” and “Core” as this standard until now, but there might have been some deficits not to exist in every person when we set them up as the standards. In order to handle the users who do not have those features, we are still using the matching method which enables us to make up of the spanning tree or the triangulation with the relations of the spanned feature. However, there are some overheads of the time on these methods and it is not sure whether they make the correct matching or not. Therefore, I would like to represent the more correct matching algorism in this paper which has not only better matching rate but also lower mismatching rate compared to the present matching algorism by selecting the line segment connecting two minutiae on the same ridge and furrow structures as the reference point.