• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.147-152
• /
• 2001

This study investigated one-dimensional vertical infiltration to an unsaturated residual soil by numerical solutions, FDM. In order to estimate the parameters needed for numerical analysis, tire soil-water characteristic curve(SWCC) of Shinnae-dong soil, one of the most typical residual soils in Korea, were experimentally obtained. Then, the statistical analysis for obtaining the SWCC was performed. The numerical solution to the linearized governing equation for unsaturated groundwater flow provides the infiltration characteristics for the unsaturated residual soil represented by transient pressure profiles and water contents profiles.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.199-204
• /
• 1989

The purpose of this study was to observe the anodic polarization curve from 4 kinds of low copper amalgam (Fine cut alloy, Spheralloy, Aristalloy and Amalcap) and 4 kinds of high copper amalgam (Dispersalloy, Sybraloy Orosphere and Tytin) obtained by using the potentiostat. The specimen made as the direction of manufacturer was stored at room temperature for about 7 days. The standard surface preparation was routinely carried out. The 0.9% saline solution was used as electrolyte in pH 6.8-7.0 at $37^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of specimen. The scan rate was 1mV/sec and the surface area of amalgam exposed to the solution was 0.785$cm^2$ for each specimen. All potentials reported are with respect to Ag/AgCl eelctrode. The following results were obtained. 1. The corrosion potential of high copper amalgams was higher than one of low copper amalgams, and the current density of high copper amalgam was lower than one of low copper amalgams. 2. The low copper amalgams had the similar pattern of polarization curve, but the high copper amalgams had the different pattern one another. 3. The polarization curve of Orosphere amalgam which is the admixed type was similar to one of low copper amalgam.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.600-603
• /
• 2002

In this study, Automatic design program creates 3D solid models and constructs them. The method of making assembly model is two. One assembles the element made in automatic design program with hand, the other develops the automatic design program fur creating assembly model. Automatic design program improves the convenience of user. In creating gears, involute curve and Trochoidal fillet curve are made by mathematical development.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.293-296
• /
• 2007

Gamma curve is one of the most important optical performance characteristics of a liquid crystal display. we present investigations on the relationship between gamma and polarizer. The gamma curve is affected by the angle of the polarizer absorption axis. When the crossed angle between the two polarizers turns larger, gamma values will decrease. The gamma variation caused from each polarizer variation could be improved by monitoring and controlling the axial direction of the polarizers.

• 대한인간공학회지
• /
• 제27권2호
• /
• pp.59-65
• /
• 2008

Product usability consists of many attributes such as learnability, efficiency, memorability, and so on. In particular, learnability is one of the most important attributes in product usability. Therefore, many people consider the primary criterion for a good user interface to be the degree to which it is easy to learn. Learnability represents the degree of how much can easily learn the usage of a product. It concerns the features of the interactive system that allow novice users to understand how to use it initially and then how to attain a maximal level of performance. In this study, we studied on the application of learning curve to evaluate product learnability. In order to validate the applicability, we carried out simple experiment using mobile phone. We got task completion times through the experiment and predicted the times using learning curve model. And then, we compared prediction times to task completion times. Finally, we identified that learning curve could apply to predict and compare product learnability.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.96-101
• /
• 1999

This study suggests an algorithm for tooth profile generation of free from curve involute gear, a special gear of which the pitch line is a free curve instead of a circular one. For the first, a methodology for calculation of the tooth curve is developed and formulated Then the formulated algorithm, is programmed for manufacturing and verified by computer graphics. Next the calculated results as changed in to NC codes to apply to wire electric discharge machine(WEDM). Finally, the machined gear is examined in engagement with a standard involute gear.

• 상하수도학회지
• /
• 제10권3호
• /
• pp.64-72
• /
• 1996

The one of the most important factors we shoud consider in designing the processes using porous media such as activated carbon adsorber is the prediction of the breakthrough curve. In this study, the breakthrough curve of BAC process for the treatment of refractory pollutants was evaluated by simplified engineering analysis. Through the experiments, the slope of the breakthrough curve can be determined by retardation factor, R and apparent dispersion coefficient, $D_{app}$ which is determined by hydrodynamic dispersion, mass transfer effects and isotherm. Estimated concentration of effluent was agreed with the experimental values. Also, it is possible to use this method for predicting the breakthrough curve of the pollutants removal and tranport of pollutants in porous media.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.23-29
• /
• 2008

본 연구는 사망률이 높은 도로 곡선부를 대상으로 도로설계요소를 기반으로 안전도 판단지수를 설정하고 이로부터 사고율을 산정하는 모듈과 곡선부와 곡선부 진입전 직선부에서의 속도차를 추정하는 모형을 개발하고 이로부터 곡선부의 안전도를 판단하는 등 두 개의 모듈을 제시하고 있다. 그리고 이러한 두 개의 모듈을 통합한 통합모델을 통해 곡선부의 안전도를 등급화 할 수 있도록 하는 것을 목적으로 한다.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.60-67
• /
• 1998

In this study, the J-Resistance Curve and material tearing modulus of SA508-C3 steel, which is one of the used nuclear pressure vessel steel, are measured ar room temperature, $200^{circ}C$ and $300^{circ}C$ according to load ratio analysis and ASTM E813, ASTM E1152, respectively. It is observed that J-R curve and Tmat value decrease as the temperature level increase. Applicability of $T_j$ proposed by Paris et al as instability parameter for ductile material is investigated. It is concluded that results are the $T_j$ parameter may be used as a crack instability parameter.