• Journal of Wind Energy
• /
• v.14 no.2
• /
• pp.5-13
• /
• 2023

As offshore wind farms are developed, the importance of cooperation with stakeholders such as fishermen from the initial phase is gradually increasing. This study developed a methodology that can promote the involvement of fishermen in the site feasibility review process. The spatial scope is Gunsan City, which is establishing an initial offshore wind project strategy. A survey was conducted for representatives of 12 fishing villages on the location preference for offshore wind farms. As a result, fishermen suggested negotiable or absolute opposite locations by examining a local sea map. Location preference seems to depend on the degrees of vitalization of fisheries using vessels. This study shows that fishermen can have reasonable opinions according to the location, not unconditionally, in initial discussions on offshore wind power. Investigating stakeholders with various positions is essential, and adjustments are needed for conflicting points in the future.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.83-89
• /
• 2013

When applying web hacking techniques and methods it needs to configure the integrated step-by-step and run an information security. Web hackings rely upon only one way to respond to any security holes that can cause a lot. In this study the diagnostic process of cross-site scripting attacks and web hacking response procedures are designed. Response system is a framework for configuring and running a step-by-step information security. Step response model of the structure of the system design phase, measures, operational step, the steps in the method used. It is designed to secure efficiency of design phase of the system development life cycle, and combines the way in secure coding. In the use user's step, the security implementation tasks to organize the details. The methodology to be applied to the practice field if necessary, a comprehensive approach in the field can be used as a model methodology.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.57-63
• /
• 2021

The launch vehicle (LV) separation detection interface of the satellite, which is designed to initiate the launch and early operation phase (LEOP) for S-band data transmission and the solar array deployment after the LV separation, is one of the hazard items at the launch site. Therefore, this interface should satisfy the single-fault tolerance requirement for the range safety. In this paper, we discuss the LV separation detection interfaces for two different satellite launch configurations and propose a method to guarantee for the satellite to start the LEOP even under the emergency case such as a partial separation from the LV. Furthermore, the proposed method meets the range safety requirement of the launch site. As this method only changes the external harness configuration of the satellite, it increases the reliability of the satellite early operation without any modification of the existing internal logics to detect the separation event.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.91-97
• /
• 2000

Once a response spectrum is estimated for the site, if there is a need of generating realistic earthquakes time histories considering seismic sources and path effects, one alternative is to use statistical phase characteristics based on real earthquake records other than assuming arbitrary duration and envelope curves. In this study, statistics of group delay times derived from Japanese strong earthquake data were used for phase generation to fully capture the stochastic property of earthquakes. The result shows that simulated earthquake time histories can be generated according to earthquake magnitude and distances with target response spectrum.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1223-1228
• /
• 2007

Since KHSL 2nd phase was adapted as a main track design, the interests of concrete slab track system have been gradually increased in the division of rail track engineering and many engineering companies have been trying to adapt a concrete slab track system at this moment. Advantages of this system proved in advanced country, japan and Germany etc. are excellent maintenance, track stability and increasing of buckling resistance This developed turnout is same with the KHSR 1st phase's design and applications rules, components and signaling system since it observes KTX specification. Comparing it with the former turnout, High-elasticity pad, lubrication-free roller slide plate and Rheda2000 PC sleeper are only different. The purpose of this study is the development of high speed turnout on concrete slab track and its application on site. Now these studies are going to show the verification and confidence about the interface between ballast-track and concrete slab track by finding and solving the possible problems when it is installed on site and to make these turnouts applied perfectly and completely on concrete slab track. Its first trial construction in korea had been successfully completed at Sangju-station on July 20th ,2007 thanks to KORAIL and KR. Hereunder Sampyo E&C trys to introduce all of turnout technologies on concrete slab track system with Rheda 2000 sleeper

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.612-615
• /
• 2015

In this work, on-site corrosion behavior of heat resistant tubes of T91, used as components of a superheater in a power plant for up to 25,762 h, has been investigated using scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy (EDS), and electron backscattered diffraction(EBSD), with the objectives of studying the composition, phase distribution, and evolution during service. A multi-layer structure of oxide scale was found on both the steamside and the fireside of the tube surface; the phase distribution was in the order of hematite/magnetite/spinel from the outer to the inner matrix on the steamside, and in the order of slag/magnetite/spinel from the outer to the inner matrix on the fireside. The magnetite layer was found to be rich in pores and cracks. The absence of a hematite layer on the fireside was considered to be due to the low oxygen partial pressure in the corrosion environment. The thicknesses of the hematite and of the slag-deposit layer were found to exhibit no significant change with the increase of the service time.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.4 s.18
• /
• pp.153-164
• /
• 2005

This study aims at establishing JIT production management system to enable manage the resources input into from procurement through construction based on correct identification of the process, an analysis on the amount of input materials and information sharing. This study has focused on the process control and working process of rebar work in domestic apartment house construction where the overall scope of Process from the planning phase to the construction phase has been analyzed in this study. Also construction phase was selected for the application of a sample case. A basic model for JIT production was generated with these processes. Furthermore A questionnaire and the on-site survey with process, checklist and control data were prepared and performed for the application of JIT production management model into rebar work. The governing scopes of JIT production management system include process management, material management, yard loading and moving management and inventory control, and the operation of each control item

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.76-77
• /
• 2015

In construction industry, management of construction factors such as cost, schedule, quality and safety is the most important key for delivering successful projects. According to the Smart Market Report, a magazine specialized in construction industry, recently said 'Off-site Prefabrication' is a significant trend related with construction productivity in global construction industry. It is a kind of practice shift from On-site to Off-site. A lot of general contractors in oversea have been using 'Multi-trade MEP Ceiling Rack Prefabrication' method for getting benefits such as decreased cost & schedule and increased labor productivity. Thus, in this paper, critical management factors at each phase from design to installation was derived by researching case studies. Forwardly, it can be a basic guideline for applying Multi-trade MEP Ceiling Rack Prefabrication in Korea construction industry.

• 보존과학연구
• /
• s.16
• /
• pp.123-128
• /
• 1995

For establishing the plan of scientific conservation on the Kyongch′onsa and site of Won-gaksa 10 floors pagodas, the investigation on the rocks consisting these pagodas has been made on the rock phase and weathering characteristics. The Kyongch′onsa pagoda consists of fine grained pale graylimestone containing abundant fossils of shell and fragments of organisms. The site of Won-gaksa pagoda is composed of marble of pale gray, white and/or light brown color, which is intercalated with thin mica schist. The marble, the recrystallized limestone, consists mainly of recrystallized calcite accompanied with minor amount of muscovite. Especially carbonate rocks are somewhat different in chemical weathering from such granitic rocks. The field survey and laboratory experiment using polarizing microscope had been done during 30 days from Feb, 13 to March, 31, 1995. The rocks equivalent to that of the site of Kyongch′onsa were identified from the Myobong limestone formation and taken samples around the road from P′yongch′ang to Mitan, P′yongch′ang-gun. The rocks similar to that of the site of Won-gaksa pagoda were distributed around Pan-un-ri, Chunch′on-myon, Yong-wol-gun. The rocks of the Silluksa pagoda consisting of white recrystallized limestone with banded structure are similar to the marble of the Hyangsan-riformation distributed around Suanbo, Ch′ungch′ongbuk-do.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.21-30
• /
• 2014

Waste landfill site which is the facility usually rejected by communities is generally perceived as one of the serious social problems. It causes serious conflicts between interested parties from the beginning of the site selection process and produces various difficulties throughout the installation process. This study suggests the systematization and standardization of the landfill site selection process to reduce those problems and to objectify the process. The study process and results are as follows. First, the landfill site selection process was divided into 4 general phases rather than more specific fragmented phases and the requirements for each phase were suggested accordingly. This can make the process clearly organized and bring the standardization of the process by increasing the applicability of each phase for various situations. Second, the utilization of GIS(Geographic Information System) and PAPRIKA (Potentially All Pairwise RanKings of all possible Alternatives) among the various MCDA(Multi-Criteria Decision Analysis) methods was suggested as the objective and scientific method. Third, the hypothetical case study on the landfill site selection process of Cheongju city was conducted based on the information above and the results show the practicability and objectivity of the newly defined landfill site selection process in this study.