• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.462-468
• /
• 2009

Purpose: The liposuction has been generalized & undergone in the field of plastic surgery and it has had a great influence on fat graft. But despite of liposuction and fat injection being performed widely, we did not focus on complication associated with donor site. So we reported satisfactory result with the intraoperative sustained limited expansion & direct closure to donor site tissue necrosis after liposuction and analyzed the cause & measures of donor site necrosis with the literature investigation Methods: From November 2007 to June 2008, we treated four cases of tissue necrosis and infection surrounding the thigh and forearm. Necrosis after liposuction was 1 case, donor site necrosis after fat injection were 3 cases and MRSA was detected in 2 cases. first, we debrided the necrotic tissue and treated with potadine gauze soaking dressing & susceptible antibiotics. After confirmation of healthy granulation tissue, we used intraoperative sustained limited expansion and closed directly of defect & observed the results. Results: The patient was displeased and worried with the unexpected damage concerning the donor site and the procedure concerning time and financial exhaustion, but after confirming no contracture of the scar tissues and only a thin or slightly widened line of scar, showed satisfaction. Conclusion: Because it is fastidious to avoid donor site complication after liposuction & fat injection, enough explanation and understanding on possible complication to donor site are necessary and careful surgery procedure & materials are required. But if donor site necrosis were occurred although close consideration of possible causes of necrosis, we should think about not only wound healing process but also the sequela like scar contracture & cosmetic effect and treat the most adequate method to satisfying both concerns.

• Computers and Concrete
• /
• v.9 no.3
• /
• pp.195-213
• /
• 2012

This paper presents the investigation of the stochastic responses of seismically isolated bridges subjected to spatially varying earthquake ground motions including incoherence, wave-passage and site-response effects. The incoherence effect is examined by considering Harichandran and Vanmarcke coherency model. The effect of the wave-passage is dealt with various wave velocities in the response analysis. Homogeneous firm, medium and soft soil conditions are selected for considering the site-response effect where the bridge supports are constructed. The ground motion is described by filtered white noise and applied to each support points. For seismic isolation of the bridge, single and double concave friction pendulum bearings are used. Due to presence of friction on the concave surfaces of the isolation systems, the equation of motion of is non-linear. The non-linear equation of motion is solved by using equivalent linearization technique of non-linear stochastic analyses. Solutions obtained from the stochastic analyses of non-isolated and isolated bridges to spatially varying earthquake ground motions compared with each other for the special cases of the ground motion model. It is concluded that friction pendulum systems having single and double concave surfaces have important effects on the stochastic responses of bridges to spatially varying earthquake ground motions.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.118-122
• /
• 2007

In this work, experimental investigation is carried out in order to design and fabricate the UHF sensor that is able to detect the partial discharges produced from 10 artificial defects introduced into the real scale 70kV GIS mock-up under high voltage within a well shielded room. As well, in order to verify the on-site applicability of our method, the newly proposed CAPD (chaos analysis of partial discharge) is combined with spectral analysis for identifying the nature of 10 artificial defects under investigation. The PD pattern recognition of each defect has been fulfilled by applying our ANN software. The result indicates that the recognition rate reaches up to 80% by the newly proposed method while the traditional PRPD analysis method allows us to obtain 41%. In consequence, it can be pointed out that the proposed method seems likely to be applicable to the real GIS at the site.

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.161-166
• /
• 2008

This study is focused on the welding performance of automatic gas pressure welding machine adapted to korean construction site by external appearance investigation. As gas pressure welding is more economical and has good performances compared with other steel bar jointing methods, as arc welding and mechanical joint etc, in Japan, the gas pressure welding is one of the typical connection of steel reinforcement when connecting the D29 and thicker steel bars, But in Korea, gas pressure welding joint method is not widely used caused by the shortage of skilled workers. so to activate the gas pressure welding in Korea, the automatic gas pressure welding machine is developed. In this study, the welding performances of gas pressure welding joint samples using korean automatic gas pressure welding machine are measured by external appearance investigation - blown diameters, blown length, welding face disagreement, central axis eccentric ratio, bending, sag and crack. The results of welding performances on the gas pressure welding joint samples show that samples are satisfied with the standard value regulated in KS D 0244 and JIS Z 3120.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.2
• /
• pp.65-80
• /
• 2011

This is to find out geomorphological environment of optimum location for the object of dwelling site of Bronze Age (hereinafter called dwelling site) of total 177 unit confirmed in Yongducheon basin and Onyangcheon basin (hereinafter called investigation-object basin) in Asan-si Chungnam. To do this, hill of investigation-object basin where dwelling sites were confirmed was divided into 11 units of hillslope geomorphological and this was combined with the grade of 5 units of gradient and again subdivided into total 55 units of micro-landforms of Hillslope. Based on this, in the viewpoint of 'gradient of each of micro-landforms' analyzed 'number of dwelling sites' and 'dwelling site distribution density (unit: number of dwelling sites/1000m2)'. As the result, the optimum geomorphological environment where dwelling sites were located was largely confirmed be 5 units(① semi-gentle slope land of crest slope ②gentle slope land of crest slope ③ slope of upper sideslope ④ flat land of crest slope ⑤ flat land of crest flat). It is thought that this analysis data will be used in the future as basic data for the study of predicting distribution of dwelling sites in Bronze Age which might have been buried in the investigation-object basin.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.705-708
• /
• 2009

For the Gas hydrate Research and Development in Korea, the prospect area I & II was surveyed and drilled during the first phase. At the result, we succeeded to discovering gas hydrate real sample at BSR reflection and vent structure. This expedition processing contributes to developing the offshore seismic survey technologies and data processing of Korea. But Korean gas hydrate test production research, in spite of activating test production at other countries, is such a limitation about technician, GH production technologies and E&P processing. First of all, there is no exist in Korea to application site for the their production research results. In this paper, we have studied the gas hydrate reservoir selection technics of the DOE & BPXA for the ANS test production. And this result will helpful to preparation of gas hydrate test production in Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.137-144
• /
• 1992

This paper reports a case study of dynamic consolidation. The objective of the study is to evaluate the effectiveness of ground improvement at the site for Hyundai Petrochemical Compound constructed at Daesan-Myeon, Seosan-Gun in the western shores of Korea. The site ground was prepared by filling on the existing soft marine deposit which consists of a loose granular soil layer and a medium stiff clay layer. For the stabilization of site ground, the compaction was executed in three different procedures with same pounder weigh, drop height and imprint spacing. The post investigation showed that the object was successfully achieved indicating a significant increase of bearing capacity of the treated ground. In this study the effectiveness of dynamic consolidation is evluated for various factors the applied energy, temping sequences, the radial distance from the imprint location and the depth of bed rock.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.31-44
• /
• 2015

Local governments in Korea are involved in three types of online shopping sites : 'direct operation', 'outsourced operation', and 'sales agency.' They are different in terms of the site operator and the charging mechanism among a local government, the site operator, and local producers. This study analyzes their differences in site traffic, local producers' participation, promotion, and partnership. The results from the investigation of 72 shopping sites are the following. First, shopping sites of the 'direct operation' type and the 'outsourced operation' type show significantly higher participation of local producers. Second, the 'marketing agency' type has significantly higher number of promotional activities than the 'oursourced type' which has significantly higher number than the 'direct operation' type. Third, the number of partnerships in the 'marketing agency' type is the highest. The 'direct operation' type is the second and significantly higher than the 'outsourced type.' On the basis of the analysis results, this paper suggests an incubation ecosystem model as a better way of involvement by local governments in online shopping sites.