• 한국측량학회지
• /
• 제37권2호
• /
• pp.91-97
• /
• 2019

In automatic map generalization, the formalization of cartographic principles is important. This study proposes and evaluates the selection method for road network generalization that analyzes existing maps using reverse engineering and formalizes the selection rules for the road network. Existing maps with a 1:5,000 scale and a 1:25,000 scale are compared, and the criteria for selection of the road network data and the relative importance of each network object are determined and analyzed using $T{\ddot{o}}pfer^{\prime}s$ Radical Law as well as the logistic regression model. The selection model derived from the analysis result is applied to the test data, and road network data for the 1:25,000 scale map are generated from the digital topographic map on a 1:5,000 scale. The selected road network is compared with the existing road network data on the 1:25,000 scale for a qualitative and quantitative evaluation. The result indicates that more than 80% of road objects are matched to existing data.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.65-76
• /
• 2000

To measure the fuel consumption rate of a vehicle, a car is tested on chassis dynamometer following given driving mode. But the fuel consumption rate measured by this method may be somewhat different from that measured in on-road driving conditions. It may be due to not considering road grade in driving modes. In this study, new driving modes which include road grade are proposed, and the simulation program to estimate the real driving fuel consumption rate of a vehicle is developed. On-road car tests to verify the simulation program are carried out and the results of the simulation are analysed and compared with those of the experiments.

• 한국도로학회논문집
• /
• 제8권3호
• /
• pp.155-162
• /
• 2006

시험도로 줄눈 콘크리트포장에 대하여 48시간 동안 시간에 따른 처짐의 변화를 측정하였고 이를 이용하여 컬링거동의 보정방안을 도출하였다. 임의 시간 슬래브의 중앙 처짐/줄눈 처짐이 임의 시간 중앙 처짐/기준 시간 중앙 처짐 사이의 관계를 회귀분석을 통해서 얻어내었다. 임의시간에 측정된 처짐으로부터 하루 가운데 최소 처짐이 나타나는 기준시간 처짐으로의 변환은 회귀곡선을 통해 추정 하였고 데이터 축적을 통해 컬링거동 보정 방안의 하나로 제시 할 수 있을 것으로 판단되었다.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.1-8
• /
• 2016

PURPOSES : This study evaluates the reliability of the patterns of changes in the road surface temperature during winter using a statistical technique. In addition, a flexible road segmentation method is developed based on the collected road surface temperature data. METHODS : To collect and analyze the data, a thermal mapping system that could be attached to a survey vehicle along with various other sensors was employed. We first selected the test route based on the date and the weather and topographical conditions, since these factors affect the patterns of changes in the road surface temperature. Each route was surveyed a total of 10 times on a round-trip basis at the same times (5 AM to 6 AM). A correlation analysis was performed to identify whether the weather conditions reported for the survey dates were consistent with the actual conditions. In addition, we developed a method for dividing the road into sections based on the consecutive changes in the road surface temperature for use in future applications. Specifically, in this method, the road surface temperature data collected using the thermal mapping system was compared continuously with the average values for the various road sections, and the road was divided into sections based on the temperature. RESULTS : The results showed that the comparison of the reported and actual weather conditions and the standard deviation in the observed road surface temperatures could produce a good indicator of the reliability of the patterns of the changes in the road surface temperature. CONCLUSIONS : This research shows how road surface temperature data can be evaluated using a statistical technique. It also confirms that roads should be segmented based on the changes in the temperature and not using a uniform segmentation method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.269-276
• /
• 2013

Information and communication technology (ICT) is a promising solution for mitigating road traffic congestion. ICT allows road users and vehicles to be managed based on real-time road status information. In Tanzania, traffic congestion causes losses of TZS 655 billion per year. The main objective of this study was to develop an optimal approach for integrating real-time road information (RRI) to mitigate traffic congestion. Our research survey focused on three cities that are highly affected by traffic congestion, i.e., Arusha, Mwanza, and Dar es Salaam. The results showed that ICT is not yet utilized fully to solve road traffic congestion. Thus, we established a possible approach for Tanzania based on an analysis of road traffic data provided by organizations responsible for road traffic management and road users. Furthermore, we evaluated the available road information management techniques to test their suitability for use in Tanzania. Using the floating car data technique, fuzzy logic was implemented for real-time traffic level detection and decision making. Based on this solution, we propose a RRI system architecture, which considers the effective utilization of readily available communication technology in Tanzania.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.211-219
• /
• 2003

The main study experiments to obtain engine torque of the vehicle during performance test of the recent automobile. Torque was measured through the engine dynamometer to produces engine torque of the vehicle but the research method calculated engine torque of the vehicle without the engine dynamometer. The performance of the vehicle receive various running resistance. The study certificates performance of certification before a certification of used vehicle didn't carry out and certificate. This way evaluated on road test and chassis dynamometer The result of the study shows that it is much possible to apply the test. After comparing the engine torque of road driving with that of chassis dynamometer, the results are approximately the same. When rapidly speeded up, the road-load vehicle can pitch in some degrees, which may result in the fluctuations of acceleration, and then affect on the engine torque. Therefore it is confirmed that this method is easier way to measure the performance of vehicles.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.192-197
• /
• 2003

The ‘AEIPR’(Accelerometer Established Inertial Profiling Reference) method has been applied to measure the road profile. The dynamic road profiling method using AEIPR has the advantages of cost effectiveness, measuring speed and relatively high reliability. However, it is required to improve the double integration algorithm to get the measurement results with the accuracy of hither level. In the first part of this paper, the effective double integration algorithm is suggested and the ‘Road Profiler’ software is developed on the basis of the algorithm. Road profiling tests are performed using the developed ‘Road Profiler’ system on the specially designed tracks for the durability tests and the various types of pubic roads. Test results are shown and evaluated by the international road evaluation indicies and classification.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.266-271
• /
• 2009

Electronic equipments and a missile carried by heavy trucks are often subjected to vibration and shock excitation during their transportation. Electronic equipments are so vulnerable to vibration and shock input that it is necessary to know in advance the vibration level of the truck which cause the damage of equipments. Road tests of a heavy truck carrying a canister on different road conditions such as paved road, unpaved road, and washboard are performed and the effect of road conditions on the vibration characteristics are analyzed. Vibration levels were measured at various locations of the truck along the path through which vibration was transmitted. This study reveals that the velocity of the truck as well as the road surface conditions are main factors which affect the vibration levels of the truck. The power spectrum density of the measured vibration signal and the factors affecting the PSD are also analyzed in this paper.

• 대한토목학회논문집
• /
• 제28권1D호
• /
• pp.35-43
• /
• 2008

본 연구는 지난 4년간 한국도로공사 시험도로 아스팔트 포장의 주요 손상인자의 정량화와 그 변화를 다루고 있다. 포장상태조사 장비인 ARAN(Automatic Road Analyzer)을 이용하여 준공 직후인 2002년 12월부터 2006년 10월까지 총 5차례에 걸쳐 아스팔트 전단면에 대해 노면상태를 측정하고 소성변형, 균열손상, 그리고 종단평탄성을 중심으로 그 결과를 분석하였다. 실내시험을 통해 시험도로의 아스팔트 혼합물의 온도와 하중 재하속도에 대한 선형점탄성 거동을 비교하고, 표층용 혼합물인 ASTM 19mm에 대해서는 동탄성계수에 미치는 공극률의 영향도 검토하였다. 일반 밀입도 표층 단면의 차륜부에서 추출한 시편의 공극률을 측정하여 시험도로 포장의 다짐도 변화를 추정하였으며 이를 바탕으로 다짐도-포장 손상의 관계를 검토하였다. 교통하중과 포장 손상과의 연관성 분석 결과 소성변형과 균열을 포함한 노면 손상의 증가는 교통하중이 재하되는 시기와 바로 일치하지는 않았으며 오히려 온도와 같은 환경에 더 영향을 받는 것으로 관측되었다. 반면에 노면 평탄성은 공용년수가 증가 하면서 교통하중에 민감하게 반응하였으며 환경인자와의 상관성은 매우 낮은 것으로 나타났다.

• 조명전기설비학회논문지
• /
• 제24권3호
• /
• pp.1-7
• /
• 2010

To find an appropriate illuminance range for the disability glare caused by the road lighting system installed on guardrails, the influence of the disability glare was evaluated in comparison with the road lighting system of a streetlight. To test the disability glare, an indoor laboratory was constructed and a variation of luminance contrast threshold was evaluated. As a result, when the retinal illuminance was increased and glare sources existed within the narrow visual field, the luminance contrast threshold was increased. Although the road lighting luminaire was installed as low as the height of the guardrail on the road, when out of sight, the influence of the disability glare was small in comparison with the conventional road lighting system such as a streetlight.