• 제목/요약/키워드: On-line monitoring system

검색결과 761건 처리시간 0.026초

전력선통신 모뎀을 이용한 전력소비감시 및 이상전력 차단해 관한 연구 (The Study On Monitoring of Power Consumption and Breaking of Abnormal Power using Power Line Commnuncation Modem)

  • 윤재식;위정철;임자용;김재헌
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.279-280
    • /
    • 2009
  • 최근 경세성장과 함께 생활수준의 향상으로 인하여 에너지 수요는 매년 증가하고 있으며 그 중에서 하나인 전력수요도 역시 급격히 늘어나고 있는 추세이다. 이와 더불어 투자자원 및 입지확보의 어려움, 환경제약의 문제로 전력 공급의 어려움은 날로 증가되고 있다. 따라서 수요증가를 전력공급 능력의 증진뿐만 아니라 수요관리 측면에서도 필요성이 대두되고 있다. 전력선 통신은 전력선을 매체로 하기 때문에 신규선로의 포설 없이 가전기기 및 정보화 서비스 모뎀들의 네트워크화에 용이할 뿐만 아니라 커버리지 확장에도 뛰어나서 디지털 가전, 원격검침, 전력설비 감시제어, 국가 재난 감시 시스템 등의 기본 통신 방식으로 가장 유력한 기술로써 디지털 가전을 포함한 유비쿼터스 전기설비 네트워크 구성에서 필수적 기술로 채택되고 있기 때문에 지능형 홈 네트워크, 전력IT 부가서비스, 설비감시 네트워크, 유비쿼터스 네트워크 관련 기술에 대한 파급 효과가 매우 크며, 디지털 가전의 기본 통신 방식으로 가장 유력한 기술로써 디지털 가전 구성에서 필수적 기술로 채택되고 있기 때문에 지능형 홈 네트워크 관련 기술에 대한 파급 효과가 매우 크다. 본 연구에서는 전력선통신모뎀을 이용하여 가전기기의 전력 소비를 감지할 수 있는 센서를 내장한 전력선 통신기반의 전력 감시 모듈을 개발하여 실시간 원격 모니터링을 통해 소비전력 패턴을 작성한다. 그리고 전력감시 모듈에 연결된 가전기기의 소비전력 패턴 분석을 통해 전력소비 이상 유무를 감지할 수 있는 알고리즘을 개발, 탑재하여 이상유무를 판단하고 전력소비가 급증할 시 자동으로 전력을 차단하여 화재나 누전의 위험을 방지한다. 이에 본 연구는 전력선통신을 이용하여 전력소비감시 및 이상전력차단에 관한 연구에 관한 것이다.

  • PDF

USN 기반의 화재감시 응용을 위한 센서 데이터 처리 시스템 (A Sensor Data Management System for USN based Fire Detection Application)

  • 박원익;김영국
    • 한국컴퓨터정보학회논문지
    • /
    • 제16권5호
    • /
    • pp.135-145
    • /
    • 2011
  • 오늘날 센서 기술의 발전 및 보급으로 인해 USN 기반의 실시간 모니터링 응용에서의 센서 데이터 처리 시스템에 대한 연구가 활발히 진행 되고 있다. 센서 데이터는 시간에 따라 빠르게 변화하고 연속적인 저수준 상태의 방대한 양의 데이터를 생성하는 특성을 갖는다. 하지만 엔드유저는 상대적으로 고수준 상태의 데이터에 관심이 있기 때문에 빠르게 변화하고 연속적인 대량의 저수준 센서 데이터를 효과적으로 처리하는 시스템이 필수적이다. 본 논문에서는 USN 기반의 화재감시 응용에서 OLAP(On-Line Analytical Processing) 기술을 이용한 다차원 분석 질의 처리 기능과 학습기반 분류기를 통한 이상치 탐지 기능을 제공하는 센서 데이터 처리 시스템을 제안한다. 실험 시나리오를 통해 우리의 센서 데이터 처리 시스템에 대한 타당성을 검증하며 실험에 필요한 다양한 센서 데이터는 자체 개발한 센서 데이터 생성기를 이용한다.

AIS에 의한 선박거동의 실시간 모니터링 (Real-time monitoring of ship's dynamic behavior characteristics by AIS)

  • 이대재
    • 수산해양기술연구
    • /
    • 제44권3호
    • /
    • pp.218-228
    • /
    • 2008
  • This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

ATM-PON의 상향에서 버스트 셀 동기장치의 FPGA 구현 (FPGA Implementation of a Burst Cell Synchroniser for the ATM-PON Upstream)

  • 김태민;정해;신건순;김진희;손수현
    • 대한전자공학회논문지TC
    • /
    • 제38권12호
    • /
    • pp.1-9
    • /
    • 2001
  • APON(ATM Passive Optical Network)에서, 상향 트래픽의 전송은 OLT가 ONU에게 타임슬롯을 할당하여 셀을 보내게 하는 TDMA(Time Division Multiple Access) 방식을 근간으로 한다. 상향은 스트림 모드가 아니기 때문에, 셀 동기 장치는 버스트 모드로 동작해야 한다. 또한, 하나의 광섬유에 여러 대의 ONU가 보내는 셀들 사이에서 충돌을 방지하기 위하여 셀 위상 감시기가 필요하다. 본 논문에서는 G.983.1 기반의 APON에서 상향 셀 전송을 위해 사용될 수 있는 TDMA 버스트 셀 동기장치를 FPGA(Field Programmable Gate Array)로 구현한다. 이 동기장치는 상향 데이터 복구(data recovery) 기능과 위상 감시 (Phase Monitoring)라는 두가지 주된 기능이 있다. 전자는 상향 타임슬롯의 오버헤드에서 preamble을 찾고 비트 및 셀 위상을 시스템 클럭에 정렬함으로써, OLT에서 상향 데이터와 클럭을 복구하기 위한 것이다. 후자는 상향 셀 충돌을 방지하기 위하여 인접 셀 간의 위상편차를 지속적으로 감시함으로써, 각 ONU에게 등화지연(equalization delay)을 보정할 수 있도록 정보를 제공하기 위한 것이다.

  • PDF

ATM-PON의 OLT에서 상향 셀 위상감시를 위한 예측기의 구현 (Implementation of a Predictor for Cell Phase Monitoring at the OLT in the ATM-PON)

  • 문상철;정해;김운하
    • 한국통신학회논문지
    • /
    • 제27권2C호
    • /
    • pp.160-169
    • /
    • 2002
  • ATM PON (Passive Optical Network) 시스템은 OLT (Optical Line Termination)와 다수의 ONU (Optical Network Unit), 그리고 스플리터와 함께 PON을 구성하는 광케이블로 구성된다. 상향 전송에서 셀 충돌을 피하기 위하여, 새로운 ONU가 설치될 때 ranging이라는 정교한 절차를 필요로 한다. 이 절차가 종료된 후에 ONU는 OLT가 제공하는 승인에 따라 상향 셀을 전송할 수 있다. 여러 가지 요인의 변화에 의해 발생할 수 있는 셀 충돌을 예방하기 위하여, OLT는 지속적으로 셀 위상 감시를 수행해야 한다. 이는 OLT가 모든 상향 셀에 대하여 기대되는 도착 시점을 예측하고, 실제 도착하는 시점을 감시하여, 두 시점 간의 오차를 계산하는 것을 의미한다. 따라서, OLT의 TC (Transmission Convergence) 칩에는 현재 제공하는 승인에 대한 셀의 도착할 시점을 계산할 수 있는 예측기가 필요하다. 본 논문에서는 이러한 예측기를 등화왕복지연에 해당하는 길이를 갖는 이동 레지스터를 이용하여 구현한다. 하나의 레지스터는 8 비트로 구성되어, OLT는 어떤 ONU가 어떤 종류의 셀을 보내는지 확인할 수 있다. 또한 TC 칩은 예측기의 기능을 이용하여 ONU의 유효 대역폭을 계산할 수 있다. 타임 시뮬레이션과 구현된 광 보드를 측정하여, 예측기의 동작을 확인한다.

선박운항자 의식 기반 충돌 위험도 모델을 이용한 관제 가이드 라인 개발에 관한 기초 연구 (A Basic Study on Development of VTS Control Guideline by Collision Risk model based on Ship's Operator's Consciousness)

  • 박상원;박영수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2015년도 추계학술대회
    • /
    • pp.20-23
    • /
    • 2015
  • 우리나라 항구 주변에는 입 출항하는 선박으로 인하여 해상교통흐름이 복잡하다. 이러한 선박통항의 안전과 효율성을 증진하기 위해 우리나라에서는 해상교통관제 서비스를 시행하고 있다. 24시간 쉴 틈이 없는 해상교통 관제사들의 노력에도 불구하고 관제구역 내에서의 충돌사고는 지속적으로 발생하고 있다. 하지만 VTS관제에 관한 절차는 없어 VTS관제사의 주관에 의한 관제를 실시하고 있는 실정이다. 이에 본 연구는 부산항관제 VHF채널을 3일간 청취하여, 교신내용을 분석하였다. 부산항관제 교신 중 통항에 관련된 사항을 충돌위험도 모델에 적용하여 위험도로 표현하였으며, 관제사들이 선박에게 권고 지시를 하는 시점의 위험도를 조우상황별, 관제사의 경력별, 주 야간별로 도출하였다. 충돌위험도 모델의 위험도는 관제사가 관제시점의 가이드라인으로 이용될 수 있다.

  • PDF

자궁적출술 환자를 위한 critical pathway 개발과 적용효과 (Critical Pathway Development for the Hysterectomy Patients and its applied Effect)

  • 노기옥;박경숙
    • 여성건강간호학회지
    • /
    • 제6권2호
    • /
    • pp.234-257
    • /
    • 2000
  • At present in the medical care, the study and effort for producing health service to consider efficiency, effectiveness, and quality are urgently called for because of the difficulty in the keen competition according to the inter- nationalization and opening, the operation in the medical institution service testing system, the change in the medical policy of KDRGs, and the lack of the health care cost increasing rate. As an alternative, the case management for the new management system is introduced in the U.S., and the Critical Pathway that is the method designing the contents of activity and its result has been developed and applied in order to anticipate and manage the patient-outcome for the realization of the cost-effective case-management. Thus, this study intended to analyze the effectiveness to obtain by developing the Critical Pathway presented as the method to improve the quality-betterment and cost effectiveness through the continuous and consistent patient management for the hysterectomy patient and applying it to the real practice. As a study method, this author formed a conceptual framework through considering five Critical Pathway used in the current U.S. and three Critical Pathway presented in the literature to develop the Critical Pathway for the hysterectomy patient, and made out the preliminary Critical Pathway through reviewing the old chart. This author made the verified the validity of the expert group about the developed Critical Pathway, and to confirm the possibility of practice application, completed and settled the final Critical Pathway after using the Critical Pathway to the hysterectomy patient from March 1st to 15th, 1997. Finally, to analyze the application-effect of the developed Critical Pathway, this author offered health care service applying the Critical Pathway to the hysterectomy patient from April 15th to August 31th, 1997. The guide for the Critical Pathway was carried out in advance by outpatient setting nurse for outpatient setting visit before the operation, and after hospitalization the primary nurse monitored the execution degree on the every duty. After discharge this author surveyed the complication through phone visiting, and one month after discharge surveyed the patient's reaction about the offered service when outpatient setting visit and analyzed the result. The source for health care cost was obtained by the statistics about the hospital charge which was offered by the General Business Department. The results were as follows. 1. It was decided that the vertical line of the Critical Pathway was made up of eight items such as monitoring/assessment, treatment, line/drains, activity, medication, lab test, diet, patient teaching, and the horizontal line of the Critical Pathway was made up of from hospitalization to discharge. 2. After the analysis of service contents through reviewing the old chart, it was decided that the horizontal line of the preliminary Critical Pathway was made up of from hopitalization to fourth postoperative day, and the vertical line of it was divided into eight items which were the contents to occur with the time frame of the horizontal line. 3. After the verifying the validity of the expert group about the preliminary Critical Pathway, the horizontal line was amended from hopitalization to third postoperative day, and taking their consensus, some contents of the horizontal line was amended and deleted. 4. From March 1st to 15th, 1997, to confirm the clinical suitability, this author offered eight hysterectomy patients the medical service through the Critical Pathway. The result was that three of them could be discharged at the expected discharge day, and the others later than that day. Supplementing the preliminary Critical Pathway through analyzing the cause of that delay- case, this author developed the final Critical Pathway. 5. There were no significant differences between the experimental and the control group in the incidence of complication(P > 0.05). 6. The 92.4% of experimental group was satisfied with the Critical Pathway service. 7. The length of hospital stay of the experimental group offered with the Critical Pathway service was 4.6 days and there was a significant difference that it was 1.3 days shorter than that of the control group(t=-29.514, P=0.000). 8. There wsa a significant difference that the mean medical charge per one patient of the experimental group offered the Critical Pathway service was cheaper \124,150 than that of the control group(t=-9.826, P=0.000). 9. The result that the author assumed and analyzed hospital income with the rate of turning bed was assumed that the increase of hospital income was \63,245,072 for that study, and the income increase was expected with \68,704,864 for a year. The result that this author applied the Critical Pathway to the hysterectomy patient have no differences in the incidence of complication, high satisfaction with that service, and the length of hospital stay decreased in the experimental group, and the mean hospital charge per one patient decreased, but hospital income increased. Suggestions for further study and nursing practice are as follows. 1. The study to apply the Critical Pathway for a year, verify the validity, and measure the effect repeatedly is needed. 2. To apply and manage the Critical Pathway effectively, the study to computerize it is needed. 3. The study to develop hospital-based Critical Pathway about other diseases or procedure, and measure the effect is needed.

  • PDF

흐름주입분석기술을 이용한 생물공정에서 암모니아 농도의 제어 (Control of Ammonium Concentration in Biological Processes Using a Flow Injection Analysis Technique)

  • 이종일
    • KSBB Journal
    • /
    • 제16권5호
    • /
    • pp.452-458
    • /
    • 2001
  • 생물공정에서 암모니아 농도를 제거하기 위해 NN 제어기를 개발하였고 기존의 PID 제어기와 비교하였다. 특히, 생물반응기내 암모니아 농도를 온라인 모니터링하기 위해 암모니아-FIA 장치를 사용하였으며, 이 장치의 분석 오차, 분석 시료의 체류 시간 등의 제어 특성에 대한 영향 computer simulation을 통해 비교, 고찰하였다. 또한 computer simulation에 의해 생물공정에 적합한 인공 신경망 제어구조를 고찰하였고, 3-2-1 구조의 NN 제어기가 PID 제어기보다 우수함을 알수 있었다. 3-2-1 구조의 NN 제어기를 이용하여 모사 생물공정 및 yeast 발효공정에서 암모니아 농도를 제어하여 그 특성을 고찰하였다. 본 연구로부터 미생물의 비선형성장 특성을 가진 생물공정에서 기질의 농도를 제어하기 위해서는 3-2-1 구조의 인공 신경망 제어기가 적합함을 알 수 있었다.

  • PDF

사출성형 공정에서의 통합정비방법에 관한 연구 (An Integrated Maintenance in Injection Molding Processes)

  • 박철순;문덕희;성홍석;송준엽;정종윤
    • 산업경영시스템학회지
    • /
    • 제38권3호
    • /
    • pp.100-107
    • /
    • 2015
  • Recently as the manufacturers want competitiveness in dynamically changing environment, they are trying a lot of efforts to be efficient with their production systems, which may be achieved by diminishing unplanned operation stops. The operation stops and maintenance cost are known to be significantly decreased by adopting proper maintenance strategy. Therefore, the manufacturers were more getting interested in scheduling of exact maintenance scheduling to keep smooth operation and prevent unexpected stops. In this paper, we proposedan integrated maintenance approach in injection molding manufacturing line. It consists of predictive and preventive maintenance approach. The predictive maintenance uses the statistical process control technique with the real-time data and the preventive maintenance is based on the checking period of machine components or equipment. For the predictive maintenance approach, firstly, we identified components or equipment that are required maintenance, and then machine parameters that are related with the identified components or equipment. Second, we performed regression analysis to select the machine parameters that affect the quality of the manufactured products and are significant to the quality of the products. By this analysis, we can exclude the insignificant parameters from monitoring parameters and focus on the significant parameters. Third, we developed the statistical prediction models for the selected machine parameters. Current models include regression, exponential smoothing and so on. We used these models to decide abnormal patternand to schedule maintenance. Finally, for other components or equipment which is not covered by predictive approach, we adoptedpreventive maintenance approach. To show feasibility we developed an integrated maintenance support system in LabView Watchdog Agent and SQL Server environment and validated our proposed methodology with experimental data.

광섬유 센서와 분포형 온도 센싱 시스템을 이용한 실규모 제방 모니터링 실험 (Large-scale Levee Monitoring Experiment Using Fiber-optic Sensor and Distributed Temperature Sensing System)

  • 안명희;배인혁;지운;강준구
    • Ecology and Resilient Infrastructure
    • /
    • 제7권3호
    • /
    • pp.181-188
    • /
    • 2020
  • 본 연구에서는 광섬유를 활용한 온도분포 센싱 방법을 실규모 제방 실험에 적용하여, 제방의 사면과 제체 내부의 변화를 모니터링하는 광역형 제방 모니터링 기술의 적용성을 검토하였다. 실규모 제방에 광섬유를 매립하고 저류지의 수위 변화에 따른 제체 내부의 시간적, 공간적 온도 변화를 측정하였다. 저류지 수위가 증가함에 따라 제방 사면의 온도는 감소하였으며, 침투가 진행되면서는 온도 변화가 나타나는 공간적 위치의 변화가 감지되었다. 제방 침투로 인한 온도 변화는 침투 경과 시간에 따라 차이가 나타났고, 침윤선으로 추정되는 변화를 관찰할 수 있었다. 본 연구를 통해 제방 내부의 온도 변화에 대한 정보는 제방 내부의 상태 변화를 판단하고 상대적으로 취약하다고 판정되는 지점에 대한 정보로 해석될 수 있음을 증명하였다.