• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.113-122
• /
• 1998

The requisite numbers of sample replicates for the population study of soft-bottom benthos were estimated from survey data on the Songdo tidal flat and subtidal zone in Youngil Bay, Korea. Large numbers of samples were taken; two-hundred-fifty 0.02 m$^2$ box corers and fifty 0.1m$^2$ van Veen grabs were taken on the Songdo tidal flat and in Youngil Bay, respectively. The effect of sampler size on sampling efforts was investigated by pooling the unit samples in pairs, fours, eights, etc. The requisite number of sample replicates (n$_r$) was determined by sample variance (s$^2$) and mean (m) function (n$_r$:s$^2$/P$^2$m$^2$), at P=0.2 level, in which s$^2$ and m were calculated from the counts of individuals collected. For example, seven samples of 0.02 m$^2$ corer for the intertidal and two samples of 0.1 m$^2$ van Veen grab for subtidal fauna were required to estimate the total density of community. The smaller sampler size was more efficient than larger ones when sampling costs were compared on the basis of the total sampling area. The requisite number of sample replicates was also predicted ($\^{n}$n$_r$) by substituting $\^{s}$$^2$ obtained from the regression of s$^2$ against m using the Taylor's power law ($\^{s}$$^2$:am$^b$). The regression line of survey data on s$^2$ and m plotted on log scale was well fitted to the Taylor's power law (r$^2$${\geq}$0.95, p<;0.001) over the whole range of m. The exponent b was, however, varied when it was estimated from m which was categorized into classes by its scale. The fitted exponent b was large when both density class and the sampler size were large. The number of sample replicates, therefore, could be more significantly estimated, if regression coefficients (a and b) would be calculated from sample variance and mean categorized into density classes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.183-199
• /
• 2006

This study aims to estimate the nationality of two envoys by examining their dresses and appearances depicted on the wall painting of Afrasiab's Palace in Samarkand with the concentration on the history of the international exchange between three states and the countries in Central Asia. The international exchange between three states and the countries in Central Asia are examined with the concentration on the literature review. And what are related to the dresses during the period of the three states are examined with the concentration on the literature review and the wall painting of Goguryeo tomb. The followings results were identified. The dresses of envoys were comprised of Jowugwan, the soft hat shaped like a peaked hat, the upper garment reaching a hip line with Jikryeong Gyoim and Tongsu, narrow trousers, black belt with a hook, front-pointed shoes and big sword with a round ring. The items of dressing are very similar to those during the Goguryeo period as observed on the wall paintings and excavated articles from the tombs from the Goguryeo period and literature. The next examination is estimated that Goguryeo had the official relationship with the countries in Central Asia before the invasion of Tang in mid-7 century when the wall painting, in our estimation, was produced, and to this end, Goguryeo sent the envoys to those countries. The envoys on the wall painting were estimated to be from Goguryeo as discussed above.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.315-330
• /
• 2017

Halo coronal mass ejections (CMEs) originating from solar activities give rise to geomagnetic storms when they reach the Earth. Variations in the geomagnetic field during a geomagnetic storm can damage satellites, communication systems, electrical power grids, and power systems, and induce currents. Therefore, automated techniques for detecting and analyzing halo CMEs have been eliciting increasing attention for the monitoring and prediction of the space weather environment. In this study, we developed an algorithm to sense and detect halo CMEs using large angle and spectrometric coronagraph (LASCO) C3 coronagraph images from the solar and heliospheric observatory (SOHO) satellite. In addition, we developed an image processing technique to derive the morphological and dynamical characteristics of halo CMEs, namely, the source location, width, actual CME speed, and arrival time at a 21.5 solar radius. The proposed halo CME automatic analysis model was validated using a model of the past three halo CME events. As a result, a solar event that occurred at 03:38 UT on Mar. 23, 2014 was predicted to arrive at Earth at 23:00 UT on Mar. 25, whereas the actual arrival time was at 04:30 UT on Mar. 26, which is a difference of 5 hr and 30 min. In addition, a solar event that occurred at 12:55 UT on Apr. 18, 2014 was estimated to arrive at Earth at 16:00 UT on Apr. 20, which is 4 hr ahead of the actual arrival time of 20:00 UT on the same day. However, the estimation error was reduced significantly compared to the ENLIL model. As a further study, the model will be applied to many more events for validation and testing, and after such tests are completed, on-line service will be provided at the Korean Space Weather Center to detect halo CMEs and derive the model parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.61-65
• /
• 2017

Purpose: The purpose of this study was to determine the correlation and ratio between the calcaneal length and width for predicting the width of calcaneus. Materials and Methods: A total of 190 feet (190 patients) were included based on computed tomography scans. The length of calcaneus (CL) was measured on the line connecting the center of a circle tangent to the cortical margin in the anterior and posterior parts of the calcaneus in a sagittal plane (W1, W2). The width of the calcaneus was defined as the horizontal line of each part (W1, W2, W3) on the same axial plane. The relationship between the measurement was determined through a correlation analysis. The reliability was assessed based on intraclass correlation coefficients. Results: The CL and widths of calcaneus (W1, W2, W3) had a good positive correlation (r=0.848 [W1/CL], r=0.738 [W2/CL], r=0.769 [W3/CL]; p<0.001). The mean CL and widths ratios were 0.33 (W1/CL), 0.37 (W2/CL), and 0.37 (W3/CL). Using these ratios to estimate the widths by multiplying each ratio by the measured calcaneal length, we found a difference between the estimated calcaneal widths and the actual measured calcaneal widths values was 0.25 mm, 0.43 mm, and 0.16 mm. All measurements showed good-to-excellent inter- and intraobserver reliability. Conclusion: This study analyzed the correlation and ratio between the length and width of the calcaneus. The results will help orthopedic surgeons fixate screws in a stable manner to prevent iatrogenic injuries to the medial neurovascular structures of the calcaneus.

• Health Policy and Management
• /
• v.18 no.3
• /
• pp.110-127
• /
• 2008

Expenditures on pharmaceuticals of different concepts were estimated and their functional, financing and providers' breakdowns were examined in line with the OECD's System of Health Accounts (SHA) manual. This study also shows the way such estimates are made. The results are then analyzed particularly from the international perspective. Data from both Household Survey by the National Statistical Office and the National Health and Nutritional Survey by the Ministry of Health and Welfare of Korea were used to estimate pharmaceutical expenditures that. are financed by out-of-pocket payments of the household, while national health insurance data etc. were used for estimation of pharmaceutical expenditures that are financed by public funding sources. The 'per capita expenditure on pharmaceutical/medical non-durables' in Korea stood at 380 US$ PPPs, less than the OECD average of 443 US$ PPPs in 2006, but its share of the per capita health expenditure of 25.9% noticeably outnumbered the OECD average of 17.1%, due partly to low per capita health expenditure as a denominator of the ratio. This indicates that Koreans tend to spend less on health care than an OECD average, while tending to spend more on pharmaceuticals than on other health care services, much like the pattern found in relatively low income countries. An international pharmaceuticals pricing mechanism is most likely responsible for such a tendency. In addition, it is to be noted that the percentage comes down to 21.0%, when expenditures on both medical non-durables and herbal medicine, which is locally quite popular among the elderly, have been excluded.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.71-80
• /
• 2007

The purpose of this study is to suggest the criteria for the damaged mountainous landscape based on the shape, location and ratio of damaged landscape. For the study, the preference and landscape adjectives were analyzed on visual images and simulations. The variables for analysis were the amount of the damaged ratio(10%, 30%, 50%), the location of the damage (upper, middle, lower) and the various forms of the damage(spot, line, area). According to the results of this study, in accordance with the amount of damage, the visual preference recorded its lowest with the a rate of 50%. As for the location of the damage, the lower-ridge of the mountain showed the highest preference, and the upper-ridge was recorded as the lowest. The linear damage type showed the highest preference. On the other hand, the spotted damage type showed lowest. The results indicate that the visual preference increases when there is a lower ratio of damage, as the damage locates at the lower-ridge, and also when there is a presence of linear formation development. The group of linear formation-the lower ridge-10% showed the highest preference, and the group of linear formation-the mid ridge-50% was the lowest with the results of 3-way ANOVA. The group of linear formation-lower ridge-10% in particular had virtually no differences of visual preference when it was compared with the original scene. The damage with the spotted formation, on the mid-upper location and the high ratio of damage were analyzed as factors that give negative influence on the mountainous landscape. The main features of mountainous landscape were reduced into two factors, 'total estimation' and 'spatial scale' by the factor analysis with total variance of 65.96%.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.2
• /
• pp.20-25
• /
• 1988

This study is to explain the characteristic of excess attenuation on the ground through the outdoors experiment about noise propagation and the reduced model experiment of acoustic. The outdoors experiment on the attenuation of noise propagation was tried with the small engine that had large acoustic output, and then it was conformed that there was relationship between the excess attenuation calculated by measurement from distance attenuation and Log(D/(Hs+Hr)). As a result, it was found that the attenuation of noise propogation depended upon the direction of the wind and frequency and was regressed in a straight line. And the numerical values of excess attenuation on the ground could be calculated by regarding Log(D/(Hs+Hr)) as a parameter with an airing resistance $\sigma$. It was found that when the mean square error between the excess attenuation calculated by measurement and the value calculated by a fomula $L=-20Log\mid1+(r_1/r_2)Qexp(ik, \bigtriangleup r)\mid$ about optional $\sigma$ was least, the optimal decision of u was made. As the characteristic of model is the model experiment on a reduced scale of 1 to 40, It was conformed that it corresponds enough with the measurement value with measuring the distance attenuation in the large anecoic chamber.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.7-15
• /
• 2008

This research is significant in terms of estimating the validity by setting evaluation items in view of integrating not only original beauty and visual areas but also natural ecological areas based on questionnaire. The results are as follows. 1) According to literature study, 17 items such as variety, the character of sites in terms of landscape, the beauty of landscape, visibility, and ratio of green visibility are selected. Also, 21 items such as variety of animals and plants species, size of green area, and ecological naturalness are selected in the area of landscape ecological resources. 2) As a result of questionnaire of the group of landscape experts, animals and plants ecological areas show 5.6341, the highest in importance analysis according to assessment areas. Also, as a result of importance analysis on items in each area, for example, in the area of visual resources, the item of skyline analysis is 6.0488, the highest. 3) As a result of corelation of item meaning on landscape effect assesment, for example, meaningness of psychological assessment item and landscape site item indicate 0.710, the highest coefficient correlation. 4) As critical assessment items per unit project, items such as damage minimization of original land features for project in terms of point, ratio of green visibility, variety of animals and plants species marked above 8.0 as high important medium. The project in terms of line, minimization of original land features, preservation of worthy biotope showed high point and the character of sites in terms of landscape, minimization of original land features, the size of green area, and analysis of skyline marked above 8.5 as high importance points. On the contrary, items for climate and soil showed relatively low points.