• Journal of Fashion Business
• /
• v.7 no.6
• /
• pp.85-91
• /
• 2003

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers cannot touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purposes of this study were to analyze factors of texture image, and to investigate the differences of consumer sensibility on texture image of apparel products based on different marketing channels (on-line/off-line). Two types of questionnaires for on-line and off-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected based on the previous literatures. 202 returned questionnaires for each type (on-line/off-line) were analyzed by t-test, mean and standard deviation with SPSS 10.0. The result of this study was showed that there were partially significant differences on consumer sensibility on texture image of apparel products between on-line and off-line. In case of corduroy, consumers perceived more high-class image under on-line than off-line. In case of taffeta, consumers perceived more thin and dense image under off-line (traditional marketing channel) than on-line (e-commerce). In case of denim, consumers perceived more thin and natural image under off-line than online. In case of organza, consumers perceived more natural image under on-line than off-line. In case of satin, consumers perceived more natural image under on-line than off-line. In case of chiffon, consumers perceived denser image under on-line than off-line. In case of velvet, consumers perceived thinner image, higher-class image, and more natural image of texture sensibility under on-line than off-line. In case of single jersey, consumers perceived higher-class image, and denser image of texture under on-line than off-line.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.129-134
• /
• 2016

Today, natural ventilation systems are widely applied in multi-family housing. However, studies using the wind data trend line of the blower door test are insufficient. Purpose: Through this study, we will propose a computational method about ventilation performance of natural ventilation systems by conducting blower door test. Method: First, we sealed the gaps between the main systems including the natural ventilation system and conducted the blower door test. Next, the natural ventilation system was opened, the blower door test was conducted, and the difference in air flow rate between when closed and when opened was checked. Blower door test was carried out with a pressure difference of 50 Pa. Result: Therefore, the ventilation performance of the natural ventilation system was checked by drawing a trend line using the data to calculate the air flow rate at 2 Pa of the natural ventilation equipment standard pressure difference.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1527-1576
• /
• 2002

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers can: t touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purpose of this study is to investigate the differences of consumer's texture sensibility of apparel products based on marketing channels (on-line/off-line). Two types of questionnaires for on-line and of f-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected in regard to the previous literatures. 205 questionnaires for each type (on-line/off-line) were distributed. Statistical devices were t-test, mean and standard deviation with SPSS10.0. The result of this study was showed that there were partially significant differences on consumers' texture sensibility on apparel products between on-line and off-line. Under on-line environment, consumers perceived corduroy as warm, strong, and sandy. taffeta as warm, sandy, and glossy, denim as sandy, and warm, organza as sandy, and thin, satin as sandy, dense, and modern, chiffon as sandy, and flat, velvet as warm, and soft, single jersey as warm, soft, and comfortable. Therefore, apparel firms cooperating based Mass-Customization in e-business have to pay attention to the differences on consumers’ texture sensibility of on-line apparel products from those of off-line.

• Journal of the Korean Society for Railway
• /
• v.4 no.4
• /
• pp.131-137
• /
• 2001

The dynamic behavior of high speed train is very important because of its safety and passengers' ride comfort. The railway vehicle is composed of many suspension components, such as 1st springs, 1st dampers, 2nd springs and 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes and the track geometry affect the dynamic behavior of high speed train. This paper reviews the dynamic behavior of KHST in the KTX test line. The VAMPIRE program is used for this simulation. The simulation results are within the limits of safety criteria. Thus the KHST can operate safely at 350 km/h in the KTX test line.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.215-216
• /
• 2005

To decrease and remove of much noises that is detected in PD (partial discharge) measuring test. we forced on detection of those. We made W-LC filter for measuring PD. which adapted that to field test. We tested after design laboratory circumstances like field line. and then the phase change properties of detected signal in UHF sensor were measured by Lemke Probe and oscilloscope (TDS-3054. Tektronix). Eventually we checked decrement of noises from experimental result. Also from experimental result at the joint box of 22.9[kV] distribution line. we obtained reasonable data which enable noises to decrease. Hereafter those results will be adapted at ultra-high voltage for trouble prevention and on-line cable watch. diagnosis of those.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.176-180
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers is designed, which has been installed inside the oil tank of transformer in a substation by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.999-1006
• /
• 2004

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition corves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). In Korea, the service run of the high speed train has been made since the 1st of April, 2004. The commercial high-speed trains must be run on the compound lines which are composed of high-speed line and conventional line. The high speed lines in both Kyoungbu line and Honam line have 57.5％ and 33.8％, respectively In this Paper, the ride comfort has been reviewed by the various experimental methods when the high-speed trains are operated on both Kyoungbu line and Honam line. The results show that the high-speed train has no problems from the viewpoint of the comfort ride during the operation on the high speed line and conventional line.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.69-75
• /
• 2005

In order to improve the reliability of high voltage rotating machines and mold transformers, it is necessary to understand the breakdown mechanism and life assessment of the high voltage winding parts. Especially the on-line PD test provides the ability to monitor effects, such as slot discharge, internal discharge, and end-winding discharge without interrupting the electrical machines, this method has been proven the major testing technology. Capacitive couplers have been the most widely used sensors for the on-line partial discharge detection in rotating machines nowadays. This paper deals with the electrical characteristics and long-term reliability of a ceramic coupler(CC), which can be easily mounted into high voltage input terminal part, has been developed and tested to continuously measure PD activity during operating condition. This paper presents electrical characteristics (dielectric loss angle, capacitance, PD inception level, breakdown voltage, and frequency response bandwidth) and long-term life test result of the developed 6.6 kV class on-line ceramic coupling sensor. It was found that this sensor had good electrical characteristics to detect PD activity during the operating condition with its detection frequency band is between several and several tens MHz. Also, the voltage life of the 6.6kV class ceramic coupler was calculated over 60 years.

• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.80-86
• /
• 2015

The purpose of this study is to establish the predictive method of the angular distortion caused by the line heating process with high frequency induction heating. In order to do it, the heat input model for the high frequency induction heating system was established through comparing the temperature evaluation results obtained by both FEA and experiment. The critical heating conditions to prevent the degradation of the work piece with various thicknesses were identified by FEA and microstructure test results. Under the critical heating conditions, the extensive line heating tests were performed. According to the test results, it was found that the angular distortion behavior of the heated plates could be defined as the function of heat intensity and the rigidity of heated plate. In addition, it was clarified that the angular distortion strongly depended on the size of test specimen such as the length and the width of the heated plate. Based on these results, the predictive equation for the angular distortion was established with the function of heat intensity, bending rigidity and size of heated plate.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.4
• /
• pp.31-37
• /
• 1980

In this paper, we are concerned with the problems of fault- detection for combinational logic networks. The method which we can obtain the complete test sets using propagation of primitive test sets is presented by considering the relation between test sets of each line. A new method is proposed that can detect the fault through the observation of the output variance by applying only the test sets equivalent to the number of inputs We found that the method is much improved compared to the conventional fault detecting procedure that requires applying the complete test sets to the logic networks.