• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 부모자녀건강학회지
• /
• 제5권1호
• /
• pp.38-49
• /
• 2002

The purpose of this study was to investigate the needs of a mother when getting the information from the child care web sites. The subjects of this study were collected through on-line and off-line and constituted of 157 mothers who had neonates and infancy. All the mothers could use the internet. On-line subjects were 135 mothers who were the members of "Child Rearing" circle of internet portal site, Daum (www.daum.net) and off-line subjects were 22 mothers who visited the pediatric outpatient department. The instrument had 15 items about needs for information of the child care web sites. 12 items were multiple choice-questions and 3 items were open questions. In data analysis, SPSSWIN 10.0 program was utilized for descriptive statistics. The results were as follows. 1. The most useful web content that mothers represented was food and nutrition(24.4%) and the other rated as following order; growth and development(21.1%), supports among parents(16.8%). 2. The most great web problem that mothers represented was depth of content(43 people) and the other rated as following order; objectivity, specialty and reliability of content(29 people), no problems (23 people), too much advertisements(17 people), obligation on member(4 people). 3. Mothers represented the highest information needs about play and education(65 people) and the other rated as following order; nutrition(44 people), managements of common health problems(39 people), experiences of other parents(10 people), child caring methods (38 people), exchanges of things(7 people). 4. Mothers represented the highest consultation needs about common health problem (62 people) and the other rated as following order; growth and activity(60 people), play and education(30 people), nutrition(22 people), child caring methods(9 people).

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권2호
• /
• pp.76-84
• /
• 2002

On-line conversion estimation of enzymatic esterification reactions in solvent-free media was investigated. In principle, conversion to ester can be determined from the amount of water produced by the reaction, because water is formed as a by-product in a stoichiometric manner. In this study, we estimated the water production rate only from some measurements of relative humidity and water balances without using any analytical methods. In order to test the performance of the on-line conversion estimation, the lipase-catalyzed esterification of n-capric acid and n-decal alcohol in solvent-free media was performed whilst controlling water activity at various values. The reaction conversions estimated on-line were similar to those determined by offline gas chromatographic analysis. However, when the water activity was controlled at higher values, discrepancies between the estimated conversion values and the measured values became significant. The deviation was found to be due to the inaccurate measurement of the water content in the reaction medium during the initial stages of the reaction. Using a digital filter, we were able to improve the accuracy of the on-line conversion estimation method considerably. Despite the simplicity of this method, the on-line estimated conversions were in good agreement with the off-line measured values.

• Journal of Plant Biology
• /
• 제23권2호
• /
• pp.55-60
• /
• 1980

The quantity of heavy metals (As, Cd, Cu, Pb, Zn) contained in marine algae collected in Onsan-myon on the east coast of Korea from March to December 1978 was determined as a part of the environmental base line survey of the Onsan Industrial Base. In general, green algae have a higher Cu content than either brown or red algae, and brown algae have higher As and lower Cu contents, while red algae have a higher Zn content. Significant differences between algal species in either Cd or Pb content were however not found.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권11호
• /
• pp.5843-5848
• /
• 2012

Aim: Developing antitumor drugs from natural products is receiving increasing interest worldwide due to limitations and side effects of therapy strategies for the second leading cause of disease related mortality, cancer. Methods: The antiproliferative activity of a methanolic extract from the aerial parts of Marrubium persicum extract was assessed with the MCF-7 breast cancer cell line using the MTT test for cell viability and cytotoxicity indices. In addition, antioxidant properties of the extract were evaluated by measuring its ability to scavenge free DPPH radicals. Moreover, the total phenolic and flavonoid content of the extract was determined based on Folin-Ciocalteu and colorimetric aluminum chloride methods. Results: The findings of the study for the antiproliferative activity of the methanolic extract of M. persicum showed that growth of MCF-7 cells was inhibited by the extract in a dose and time dependent manner, where a gradual increase of cytotoxicity effect has been achieved setting out on 200 ${\mu}g/mL$ concentration of the plant extract. The antioxidant assay revealed that the extract was a strong scavenger of DPPH radicals with an $RC_{50}$ value of 52 ${\mu}g/mL$. The total phenolic and flavonoids content of the plant extract was 409.3 mg gallic acid equivalent and 168.9 mg quercetin equivalent per 100g of dry plant material. Conclusion: Overall, M. persicum possesses potential antiproliferative and antioxidant activities on the malignant MCF-7 cell line that could be attributed to the high content of phenolics and flavonoids, and therefore warrants further exploration.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.85-90
• /
• 2010

In this paper the effects of a Static Synchronous Series Compensator, which is constructed with a 48-pulse inverter, on the power demand from the grid are studied. Extensive simulation studies were carried out in the MATLAB simulation environment to observe the compensation achieved by the SSSC and its effects on the line voltage, line current, phase angle and real/reactive power. The designed device is simulated in a power system which is comprised of a three phase power source, a transmission line, line inductance and load. The system parameters such as line voltage, line current, reactive power Q and real power P transmissions are observed both when the SSSC is connected to and disconnected from the power system. The motivation for modeling a SSSC from a multi-pulse inverter is to enhance the voltage waveform of the device and this is observed in the total harmonic distortion (THD) analysis performed at the end of the paper. According to the results, the power flow and phase angle can be controlled successfully by the new device through voltage injection. Finally a THD analysis is performed to see the harmonics content. The effect on the quality of the line voltage and current is acceptable according to international standards.

• 한국육종학회지
• /
• 제41권1호
• /
• pp.1-8
• /
• 2009

This study was carried out to breed and develop high quality and functional nutrient tomato with multi disease resistance as well as a stable growing adaptation for fresh market usage under protected plastic houses cultivation. The materials were used 5 inbred lines and their 6 hybrids of large tomato group, which have been bred and developed from 1999 to 2007 in Division of Plant Resource Department of Chungnam National University. Fruit weight showed hybrid vigor effect that $F_1$ hybrids weighed more than their parent lines, fruit shape formed three type of oblate, deep oblate and globe shape, in firmness and pericarp thickness have got a high significant correlation, inbred DN611 line was measured the most firm fruit with 6.04 mm pericarp thickness. In fruit color at maturity, pink color crossed to red color appeared all red fruit color in the $F_1$ hybrids, it means red skin color is a dominant gene compared to pink skin color is a recessive gene in tomato, while between fruit skin color and shoulder part color showed no any co-relationship. The sugar content and titratable acid of $F_1$ hybrids inherited an intermediate data of their parent lines, the flavor of KP543 inbred line and the hybrid (JB535 x KP543) revealed the better taste with high brix and proper titratable acid content$^{*}$. In beta carotene content DN611 line showed 2~3 times higher than other materials so that its 3 hybrids contained an increased level of beta carotene, lycopene content was not so much difference among inbred lines and $F_1$ hybrids, of them MD508 contained higher of 8.72 mg and hybrid (JB535 x JA517) had 8.05 mg lycopene content per 100 g fruit, overall pink skin color and red skin color measured a higher lycopene content than yellow and orange skin color at ripe stage. In disease resistance test by PCR marker for Fusarium race2 (I2), Nematode (Mi1), ToMV ($Tm2^2$), Cladosporium (Cf9), (JB535 x JA517) hybrid have got multi-resistance with homozygote band in Nematode, ToMV, Cladosporium and heterozygote band in Fusarium race2. Through this breeding program we could select high quality and functional nutrient with multi resistant $F_1$ hybrids and inbred lines in tomato which are two best hybrids (JB535 x MD508), (JB535 x JA517), additionally developed high beta carotene inbred line DN611 and increased the level of lycopene inbred line MD508. These results will be very useful to make a high quality tomato variety continuously.

• 한국생활과학회지
• /
• 제18권5호
• /
• pp.1063-1075
• /
• 2009

This study intends to provide foundational data for enhancing the welfare of customers purchasing digital products through analyzing the notes from written on-line reviews. The data used for the analysis are 6,342 on-line reviews for cell phones and digital cameras released from November, 2007 until April, 2008, which was posted on Naver Knowledge Shopping from November, 2007 until June, 2008. Through the on-line reviews, this article analyzed the evaluations on the digital products' hardware, software, design, service, price, and other criteria and the customers' emotional experience in the process of purchase, use, and possession. According to the results of the analysis, negative evaluation and emotional experience were originated from the company's information provision methods and purchase process. In addition, insufficient information searches in the process of online purchases, consumers' low right consciousness, and impolite on-line reviews were also problematic. Customers' evaluations and emotional experiences on digital products were conducted in a complex way. Based on that, this research makes suggestions in the company's marketing, customer education, and theoretical aspect.

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.93-104
• /
• 1995

Liquid crystal-polymer composite(LCPC) films promising new materials for both projection displays and vision product. LCPC films consist of a continous liquid crystal phase embedded in a three- dimensional network of polymer matrix. The liquid crystal in these LC phases can be elecrtrically switched giving rise to an opaque scattering off-stats and a transparent, non-scatting on- stats. In this work. a premixture is composed of LC, UV-curable monomer and photonitiator. LCPC films are formed by photopolymerization induced phase separation from this premixture. In conclusion, structure and electro-optical properties of LCPC films strongly depends on the selection of monomer, LC content and curing rate.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.591-596
• /
• 2014

Augmented reality is a novel human-machine interaction that overlays virtual computer-generated information on a real world environment. It has found good potential applications in many fields, such as training, surgery, entertainment, maintenance, assembly, product design and other manufacturing operations. In this study, a smartphone-based augmented reality system was developed for the purpose of monitoring and managing injection molding production lines. Required management items were drawn from a management content analysis, and then the items were divided into two broad management categories: line management and equipment management. Effective work management was enabled by providing those working on the shop floor with management content information combined with the actual images of an injection molding production line through augmented reality.