• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.73-82
• /
• 2011

The solid insulation system of stator windings in high voltage rotational machines is usually aging in accordance with long time operation. The partial discharge test have been known to check whether insulation deterioration exist or not, and the PD test can effectively diagnose a solid insulation condition regardless of during operation(on-line) or not(off-line). The on-line PD measurement have proven to be a successful technique in monitoring stator insulation condition nowadays. This paper describes the characteristics of comparing the on-line PD measurement data using PDMS-HG(Partial Discharge Monitoring System for Hydro-electric Generator) installed in field with the off-line diagnosis measurement data(insulation resistance, winding resistance, PI, ${\Delta}tan{\delta}$ and PD) on hydro generator(13[kV]) stator windings. These results make good use of managing rotational machines through evaluating the solid insulation condition of stator windings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.778-781
• /
• 2008

The aim of this paper is to analyze the dynamic responses of pantograph-overhead contact line coupled system by using a condition monitoring system. The monitoring items are strain, vertical displacement and acceleration of a contact wire. Both strain and vertical displacement in the contact wire depends on uplift force and train velocity. Measurement of acceleration shows that the passage of the pantograph gives an impact force to a hard point on a contact wire.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.51-58
• /
• 1994

Condition monitoring technology has recently been received much attention in the light of its significance on the maintenance of complex machineries such as turbines in power plants. Currently, turbines in power plants are maintained by scheduled overhaul based on the manufacturer's recommendations and the utility's experience. Although this preventive maintenance is known to be very effective, operators have less access to identify failure of elements when it happens between overhaul period. Therefore, in this study, a development of a on-line condition monitoring system through wear debris analysis of lubricating oils is aimed with a view to detecting abnormal wear behaviour of bearings and other wet-components at an early stage, allowing better outage scheduling and minimizing forced outages. For field application purposes, the on-line system developed was installed on the turbine of the No.4 unit at Ulsan Power Plant and its performance has been evaluated on site.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.813-823
• /
• 2013

On-line monitoring system is important for high voltage vacuum circuit breakers (HVCBs) in operation condition assessment and fault diagnosis. A distributed multilayer system with client/server architecture is developed on rated voltage 10kV HVCB with spring operating mechanism. It can collect data when HVCB switches, calculate the necessary parameters, show the operation conditions and provide abundant information for fault diagnosis. Ensemble empirical mode decomposition (EEMD) is used to detect the singular point which is regarded as the contact moment. This method has been applied to on-line monitoring system successfully and its satisfactory effect has been proved through experiments. SVM and FCM are both effective methods for fault diagnosis. A combinative algorithm is designed to judge the faults of HVCB's operating mechanism. The system's precision and stability are confirmed by field tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.103-105
• /
• 2008

In, this paper, we consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PO) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PO testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PO measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1108-1113
• /
• 2000

A condition monitoring methodology for rotating machinery is proposed based on multivariate statistical analysis. The CMS usually are using the vibration signal amplitude such as acceleration RMS, peak and velocity RMS to detect machine faults but the information is not so enough that CMS cannot perform reliable monitoring. So new parameters are added such as shape factor, crest factor, kurtosis and skewness as time domain parameters and spectrum amplitude of rotating frequency, $2^{nd}$ harmonics and gear mesh frequency etc. as frequency domain parameters. Many parameters are combined to represent the machine state using the Hotelling's $T^2$ statistics. The proposed methodology is tested in laboratory and the on-line experiment has shown that the proposed methodology offers a reliable monitoring for rotating machinery.

• Transactions on Electrical and Electronic Materials
• /
• 제7권2호
• /
• pp.90-95
• /
• 2006

An on-line diagnostic test has been studied and performed for the pumped storage generator/motor. This study aims at reducing the diagnostic cost, minimizing the technical dependency on third party manufactures. Further design of on-line diagnostic system such as shorted-turn of rotor winding, partial discharge (PD) of stator winding and air-gap between stator and rotor for pumped storage generator/motor has been verified. In addition, it needs to be validated on site performance of the developed continuous on-line monitoring system for corresponding tasks for the improvement of the availability & reliability during operation.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1238-1244
• /
• 2009

본 연구는 헬리콥터용 터보축엔진의 온라인 상태진단을 위해 퍼지-신경망 알고리즘을 제안하였고 GUI 형태의 SIMULINK프로그램으로 개발하였다. 진단 프로그램 개발을 위해 look-up 테이블 형식 기본 성능 모듈로 계산시간을 줄였고 실시간 성능 데이터를 획득하기위해 신호 생성 모듈을 사용하였다. 이 프로그램은 계측성능상태를 모니터링하기위한 온라인 상태모니터링 프로그램과 계측데이터와 퍼지를 이용한 정성적인 상태진단과 신경 회로망을 이용한 정량적인 상태진단으로 이루어진다. 제안된 온라인 진단 프로그램은 헬리콥터엔진의 상태모니터링에 적용 가능여부를 확인하기 위하여 터보샤프트 엔진을 대상으로 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1644-1646
• /
• 2003

This paper presents recent studies on the on-line insulation monitoring and diagnostic systems for transformers developed by HHI. Sufficiently high sensitivity and accuracy for practical use were achieved for the system, combined with communication networks to provide an on-line remote monitoring system. Several alarm criteria are formulated to enable a superimposed monitoring system to perform decisive action. The reasons for monitoring the condition and maintaining the health of electrical apparatus were discussed. The experience at the fields and the criteria for the judgment are also discussed in detail.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.80-88
• /
• 2013

최근 개발되는 엔진 진단 시스템들은 현장에서 일하는 엔진 정비사들이 이들 시스템들의 복잡성, 비실용성, 공학적 이해부족으로 사용하기가 매우 어렵다. 따라서 실용성 있는 엔진 진단시스템이 요구된다. 본 연구는 작동중인 온라인 성능진단 자료와 기본엔진 성능모델에 의해 계산된 초기고장이 없는 엔진 성능자료와의 비교를 통한 소형엔진의 실용적 성능진단 시스템 개발에 관한 것이다. 또한 제안된 성능진단 시스템은 성능이 저하되거나 고장이 난 엔진으로 간주되는 작동 중 엔진과 고장이 없는 엔진으로 간주되는 기본 엔진 성능모델 사이의 구성품 성능특성을 비교함으로서 가스경로 구성품의 온라인 진단을 확인할 수 있다. 개발된 상태진단시스템은 실제 적용을 용이하게 하기위해 SIMULINK와 LabVIEW프로그램을 이용하여 사용자조건의 GUI형 프로그램으로 작성하였다.