• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.331-341
• /
• 1995

The purpose of this study was to aid in the prediction of tumor cell tolerance to radiotherapy and/or chemotherapy. For this study, cell surviving curves were obtained for murine melanoma Bl6 cell line using semiautomated M1T assay. 2,4,6,8, 10Gy were irradiated at a dose rate of 210cGy/min using /sup 60/Co Irradiator ALOORADO 8. After irradiatior, B16 cell lines(2.5×10⁴ cells/ml) were exposed to bleomycin and cisplatin at concentration of 0.2㎍/㎖, 2㎍/㎖ and 20㎍/㎖ for I hour respectively. The viable cells were determined for each radiation dose and/or each concentration of drug. And they were compared to control values. The obtained results were as follows : 1. There was significant difference of surviving fraction at 4, 6, 8, 10Gy on B16 cell line(P<0.05). 2. There was significant difference of cytotoxicity between bleomycin and cisplatin at concentration of 0.2㎍/㎖ and 2㎍/㎖(P<0.05) on B16 cell line, but there was no significant difference of cytotoxicity at concentration of 20㎍/㎖ on B16 cell line. 3. There was significant difference of cytotoxicity of bleomycin after irradiation of 2Gy and 10Gy on B16 cell line(P<0.01). 4. There was significant difference of cytotoxicity of cisplatin at concentration of 20㎍/㎖ after irradiation on B16 cell line.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.241-246
• /
• 1989

Continuous on-line monitoring of cell concentration and growth rate in aerobic batch fermentation process was carried out by analyzing the exhaust gas composition of tormentor with a quadrupole mass spectrometer. From the mass spectrometric analyses of major gaseous components, i.e. $N_2$, $O_2$, $CO_2$ and $H_2O$, and the material balance equations for oxygen and carbon dioxide, oxygen uptake rate (OUR) rind carbon dioxide evolution rate (CER) were instantaneously calculated using a computer (16-bit IBM PC-AT) interfaced to a quadrupole mass spectrometer. The calculated OUR and CER data were used for the estimation of cell concentration and growth rate of Candida utilis during batch culture. It was found that the cell concentration could be satisfactorily estimated from the data of OUR arid CER during the culture and this method could be successfully und for the continuous monitoring of cell growth and growth rate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.2
• /
• pp.152-158
• /
• 2003

Titration method is one of the widely used methods for the concentration measurement of absorbent ammonia/water. However, this method is inconvenient because the solution should be extracted for the measurement. Moreover, significant error can be introduced by the evaporation of ammonia during the sampling and measuring procedure. In this study a reliable in-line concentration measurement method was proposed. To prove the validity of the concept, a measuring apparatus was designed, built, and tested with water. It is found that the location of flow inlet and exit is important in the measurement accuracy. The flow inlet and exit located in the middle of the test cell showed the best result. By the error analysis, it is expected that the ammonia concentration can be measured within the error of $\pm$0.18% assuming the error of 0.1 K in temperature measurement and 0.1 g in weight measurement.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.121-132
• /
• 1996

The purpose of this study was to aid in the prediction of tumor cell tolerance to radiotherapy and/or chemotherapy. For this study, cell surviving curves were obtained for human osteosarcoma MG-63 cell line using semiautomated MTT assay. 2,4, 6, 8, 10Gy were irradiated at a dose rate of 210cGy/min using /sup 60/Co Irradiator ALDORADO 8. After irradiation, MG-63 cell lines(3×10⁴ cells/ml) were exposed to bleomycin and cisplatin at concentration of 0.2, 2, 20㎍/㎖ for 1 hour respectively. The viable cells were determined for each radiation dose and/or each concentration of drug. And they were compared to control values. The obtained results were as follows : 1. There was significant difference of surviving fraction at 4, 6, 8, 10Gy on MG-63 cell line(p<0.05). 2. There was significant difference of cytotoxicity of bleomycin or cisplatin at all concentration of 0.2, 2, 20㎍/㎖ (p<0.05) on MG-63 cell line. The cytotoxicity of cisplatin was more effective than bleomycin at concentration of 20㎍/㎖ on MG-63 cell line. 3. There was significant difference of cytotoxicity of bleomycin or cisplatin at all concentration after irradiation of 2Gy on MG-63 cell line. 4. There was significant difference of cytotoxicity of bloemycin or cisplatin at concentration of 20㎍/㎖ after irradiation than that of irradiation alone(p<0.01). But there was no significant difference of cytotoxicity of bleomycin at concentration of 20㎍/㎖ after irradiation of l0Gy than that of irradiation alone.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.167-172
• /
• 1998

In batch cultures of Brevibacterium ketoglutamicum for the L-ornithine production in which the pH and dissolved oxygen concentration were regulated constant, the profiles of redox potential were observed in parallel with the profiles of state variables such as cell, glucose, and ornithine concentrations. It was found that the redox potential had a close relationship with cell concentration and was also affected by ornithine concentration. The effects of ornithine and glucose on redox potential were examined in a separate series of experiments. Based on the experimental results, a correlation of redox potential to glucose, cell and ornithine concentrations has been proposed. The proposed correlation can be used for on-line estimation of ornithine concentration from on-line data of redox potential, glucose concentration, and cell concentration.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.725-742
• /
• 2016

This paper is focused on stiffness ratio effect and a new method to specify the best pattern of piezoelectric patches placement around a hole in a plate under tension to reduce the stress concentration factor. To investigate the stiffness ratio effect, some different values greater and less than unity are considered. Then a python code is developed by using particle swarm optimization algorithm to specify the best locations of piezoelectric actuators around the hole for each stiffness ratio. The results show that, there is a line called "reference line" for each plate with a hole under tension, which can guide the location of actuator patches in plate to have the maximum stress concentration reduction. The reference line also specifies that actuators should be located horizontally or vertically. This reference line is located at an angle of about 65 degrees from the stress line in plate. Finally two experimental tests for two different locations of the patches with various voltages are carried out for validation of the results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1078-1083
• /
• 2002

The objectives of this paper are to measure the concentration of $H_2$O/LiBr solution by measuring the electrical conductivity and to study the effect of the solution temperature and the concentration on the electrical conductivity of the solution. The solution temperature ranges $20^{\circ},\;40^{\circ},\;and\; 60^{\circ}$ for a fixed concentration during the experiment. The valid ranges of the concentration are two regions, low concentration region (1~20% of LiBr) and high concentration region (55~66% of LiBr). The results show that the conductivity of the solution increases linearly with increasing the solution temperature while it increases without creasing the concentration lower than about 35% of LiBr and decreases with increasing the concentration higher than 35%. This paper proposes experimental correlations for the concentration as functions of the solution temperature and the concentration with error band of $\pm7$% for the low concentration region and $\pm1$% for the high concentration region, respectively. The experimental correlation can be practically used in the on-line measurement without any sampling of solution from the closed system.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.43-53
• /
• 1997

The purpose of this study was to aid in the prediction of tumor cell tolerance to radiotherapy and/or chemotherapy. For this study, cell surviving curves were obtained for mouse lymphoma YAC-1 cell line using semi automated MTT assay. 2, 4,6, 8, 10Gy were irradiated at a dose rate of 210cGy/rnin using /sup 60/Co Irradiator ALDORADO 8. After irradiation, YAC-1 cell lines(3×10⁴cells/ml) were exposed to bleomycin or cisplatin for 1 hour. The viable cells were determined for each radiation dose and/or each concentration of drug at the 4th day. And they were compared to control values. The obtained results were as follows : 1. The surviving curve with gentle slope was obtained after irradiation of 2, 4, 6, 8, 10 Gy on YAC-1 cell line. 2. The cytotoxicity of bleomycin or cisplatin was increased significantly at all concentration of 0.2㎍/ml, 2㎍/ml and 20㎍/ml on YAC-1 cell line (P<0.01). And the cytotoxicity of cisplatin was greater than that of bleomycin at all concentration on YAC-1 cell line (P<0.01). 3. There were no significant differences of surviving fractions among 4Gy, 6Gy and 8Gy after irradiation of each radiation dose with 2㎍/ml of bleomycin compared with irradiation only on YAC-1 cell line. 4. There was significant difference of surviving fraction between 2Gy and 10Gy after irradiation of each radiation dose with 2㎍/ml of cisplatin compared with irradiation only on YAC-1 cell line(P<0.05). 5. There were significant differences of surviving fractions between the groups of irradiation only and the groups of irradiation with 2㎍/ml of bleomycin or cisplatin at all doses of 2, 4, 6, 8 and 10Gy on YAC-1 cell line(P<0.05).

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2489-2497
• /
• 2023

Co and Eu impurities in the SSCs are nuclides that dominantly influence the neutron-induced radioactive inventory in metal and concrete radwastes (radioactive wastes) during NPP decommission. The impurity concentrations provided by NUREG/CR-3474 were used for the practical range of Co and Eu impurity concentrations to be applied to the code calculations. Metal structures near the core were evaluated to be ILW (intermediate-level waste) for the whole range of Co impurity concentration, so the boundary line between ILW and LLW (low-level waste) has no change for the whole concentration range provided by NUREG/CR-3474. Also, the boundary line between VLLW (very low-level waste) and CW (clearance waste) in the concrete shield could alter a little depending on the Eu impurity concentration within the range provided by NUREG/CR-3474. From this work, it is found that the concentration of material impurities of SSCs gives no critical impact on determining radwaste levels.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.571-575
• /
• 2005

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures of Agaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of $10{\sim}40%$, showing a good extrapolation capability.