• Journal of Microbiology and Biotechnology
• /
• v.29 no.10
• /
• pp.1607-1623
• /
• 2019

Sediment bioelectrochemical systems (SBESs) can be integrated into brackish aquaculture ponds for in-situ bioremediation of the pond water and sediment. Such an in-situ system offers advantages including reduced treatment cost, reusability and simple handling. In order to realize such an application potential of the SBES, in this laboratory-scale study we investigated the effect of several controllable and uncontrollable operational factors on the in-situ bioremediation performance of a tank model of a brackish aquaculture pond, into which a SBES was integrated, in comparison with a natural degradation control model. The performance was evaluated in terms of electricity generation by the SBES, Chemical oxygen demand (COD) removal and nitrogen removal of both the tank water and the tank sediment. Real-life conditions of the operational parameters were also experimented to understand the most close-to-practice responses of the system to their changes. Predictable effects of controllable parameters including external resistance and electrode spacing, similar to those reported previously for the BESs, were shown by the results but exceptions were observed. Accordingly, while increasing the electrode spacing reduced the current densities but generally improved COD and nitrogen removal, increasing the external resistance could result in decreased COD removal but also increased nitrogen removal and decreased current densities. However, maximum electricity generation and COD removal efficiency difference of the SBES (versus the control) could be reached with an external resistance of $100{\Omega}$, not with the lowest one of $10{\Omega}$. The effects of uncontrollable parameters such as ambient temperature, salinity and pH of the pond (tank) water were rather unpredictable. Temperatures higher than $35^{\circ}C$ seemed to have more accelaration effect on natural degradation than on bioelectrochemical processes. Changing salinity seriously changed the electricity generation but did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed a significantly more efficient removal of nitrogen in the water, compared to the control. Variation of pH to practically extreme levels (5.5 and 8.8) led to increased electricity generations but poorer performances of the SBES (vs. the control) in removing COD and nitrogen. Altogether, the results suggest some distinct responses of the SBES under brackish conditions and imply that COD removal and nitrogen removal in the system are not completely linked to bioelectrochemical processes but electrochemically enriched bacteria can still perform non-bioelectrochemical COD and nitrogen removals more efficiently than natural ones. The results confirm the application potential of the SBES in brackish aquaculture bioremediation and help propose efficient practices to warrant the success of such application in real-life scenarios.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.27-32
• /
• 1997

Continual monitoring of abnormal operating conditions i a key issue in maintaining high product quality and safe operation, since the undetected process abnormality may lead to the undesirable operations, finally producing low quality products, or breakdown of equipment. The statistical projection method recently highlighted has the advantage of easily building reference model with the historical measurement data in the statistically in-control state and not requiring any detailed mathematical model or knowledge-base of process. As the complexity of process increases, however, we have more measurement variables and recycle streams. This situation may not only result in the frequent occurrence of process Perturbation, but make it difficult to pinpoint trouble-making causes or at most assignable source unit due to the confusing candidates. Consequently, an ad hoc skill to monitor and diagnose in plat-wide scale is needed. In this paper, we propose a hierarchical plant-wide monitoring methodology based on hierarchical decomposition and principal component analysis for handling the complexity and interactions among process units. This have the effect of preventing special events in a specific sub-block from propagating to other sub-blocks or at least delaying the transfer of undesired state, and so make it possible to quickly detect and diagnose the process malfunctions. To prove the performance of the proposed methodology, we simulate the Tennessee Eastman benchmark process which is operated continuously with 41 measurement variables of five major units. Simulation results have shown that the proposed methodology offers a fast and reliable monitoring and diagnosis for a large scale chemical plant.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.1
• /
• pp.79-91
• /
• 2004

The purpose of this study was to examine how much secondary school home economics teachers paid attention to performance assessment, to what extent and in which way they carried it out and how much support was given to that. It's basically meant to help provide more systematic support for performance assessment. The instrument used in this study was an Interest-Based Reform Adoption Model developed by Hall. Hord and et. al. at Texas University Research & Development Center for Teacher Education. and the subjects in this study were home economics teachers from 95 secondary schools in Gyeonggi province. After a survey was conducted by mail. the responses from 157 teachers were chosen for analysis. For data handling. SPSS/WIN program was utilized, and statistical data on mean. standard deviation and percentage were obtained. In addition. t-test and ANOVA were employed. The major findings of this study were as follows: First. as for their type of interest in performance assessment. influential type(35.0%) was most common. followed by confident type (29.3%). indifferent type(20.4%) and task type(15.3%). Second, regarding their implementation. every teacher carried out performance assessment. The largest group of the teachers fulfilled it as part of routine daily schedule(60 teachers. 38.2%). which could be called the level 4. The second largest group tried to integrate performance assessment to education programs(53 teachers. 33.8%). which could be called the level 5. The third largest group implemented it without making careful preparations for that(26 teachers. 16.6%). which could be called the level 3. and the fourth largest group tried to reinvent it(11 teachers. 7.0%), which could be called the level 6. The fifth largest group was in the middle of researching it(5 teachers, 3.2%). which could be called the level 1. And the sixth largest group was in the course of making preparations for that(2 teachers. 1.3%) . which could be named the level 2. Third. concerning how much they found themselves to be supported about performance assessment. they eave three or less marks to that. which showed that they weren't supported sufficiently There was little gap among them in their concern for performance assessment and its implementation levels. and this fact suggested that there wasn't satisfactory backup for their performance assessment.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.617-622
• /
• 2010

We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at $90^{\circ}C$ showed the best performance for flexural strength.

• Clean Technology
• /
• v.27 no.2
• /
• pp.160-167
• /
• 2021

This study investigated the environmental effects of improving the general-type activated carbon adsorption tower used at the Sihwa/Banwol Industrial Complex with use of a cartridge-type activated carbon adsorption tower for the application of an activated carbon co-regenerated system. Four general-type activated carbon adsorption towers and two cartridge-type activated carbon adsorption towers were selected to analyze the properties of activated carbon and to compare the efficiency of reducing environmental pollutants. The results showed that the activated carbon used in the cartridge-type activated carbon adsorption towers was high quality activated carbon with an iodine adsorption force of more than 800 mg/g and that a good adsorption performance was maintained within the replacement cycle. From an analysis of the environmental pollutant reduction efficiency, it was confirmed that the cartridge-type activated carbon adsorption tower functioned properly as a prevention facility for handling emissions pollutants with a treatment efficiency of total hydrocarbons (THC), toluene, and methylethylketone (MEK) components of 71%, 77%, and 80%, respectively. The general activated carbon adsorption tower, which was confirmed to use low-performance activated carbon, had a very low treatment efficiency and did not function properly as a prevention facility for dealing with emission pollutants. It is believed that it is possible to reduce pollutants during operations by changing from the general-type activated carbon adsorption tower to a cartridge-type activated carbon adsorption tower.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2016

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.175-184
• /
• 2019

This paper presents a modeling prototype that optimizes construction processes implementing information communication technology (ICT). Using "IAMB", each and every actual steps of the construction process may be defined visually and explicitly by elaborating ICT to improve productivity and management efficiency. It contributes to identify the features on what parts of construction task are covered by ICT, and the effects of ICT on process performance. After analyzing 10 real project cases, ICT application types are classified into four categories according to ICT type, job functions that ICT applied, and the project phase in which ICT used. As a reuslt, it was confirmed that the positive outcomes on the construction process were beneficial to mostly the general contractors and mainly obtained by automated information processing, external consignment and consistent information use. Negative effects, which were occurred by mainly manual manipulation and duplication of information handling, were accrued to general contractors minimally, but to subcontractors maximally. Expert focus group commends that several important issues should be considered when implementing ICT.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.5-22
• /
• 2002

With the rapid advance of internet service and the corresponding migration of service environment from the text-based one to WWW (World Wide Web) environment, the number of internet users is growing rapidly due to its easy usage. Accordingly, usage of internet as services for sending electronic mails to the other party over the network is becoming increasingly prevalent. Web-based electronic mailing system is comprised of a server and a client. The former provides the users with e-mail accounts and services, while the latter serves as a user interface. In other words, it enables those public users who dos not own e-mail accounts on the existing mail server to have an access to the mailing service through the web. In this paper, we designed a effective web-based electronic mailing system which is based on the internet explorer and linux operating system, which overcomes limitations of the existing e-mail systems and meets the need of a cost-efficient alternative. Our electronic mailing system also supports the convenience of users through appropriate handling of preregistered spam e-mails and multiple e-mails, and this facilitates the development of a stable e-mail system by being able to avoiding the low system performance due to the bursty characteristics of e-mail messages and the increasing number of users

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.419-437
• /
• 2023

As the number of thin filers in Korea surpasses 12 million, there is a growing interest in enhancing the accuracy of assessing their credit default risk to generate additional revenue. Specifically, researchers are actively pursuing the development of default prediction models using machine learning and deep learning algorithms, in contrast to traditional statistical default prediction methods, which struggle to capture nonlinearity. Among these efforts, Graph Neural Network (GNN) architecture is noteworthy for predicting default in situations with limited data on thin filers. This is due to their ability to incorporate network information between borrowers alongside conventional credit-related data. However, prior research employing graph neural networks has faced limitations in effectively handling diverse categorical variables present in credit information. In this study, we introduce the Transformer embedded Graph Convolutional Network (TeGCN), which aims to address these limitations and enable effective default prediction for thin filers. TeGCN combines the TabTransformer, capable of extracting contextual information from categorical variables, with the Graph Convolutional Network, which captures network information between borrowers. Our TeGCN model surpasses the baseline model's performance across both the general borrower dataset and the thin filer dataset. Specially, our model performs outstanding results in thin filer default prediction. This study achieves high default prediction accuracy by a model structure tailored to characteristics of credit information containing numerous categorical variables, especially in the context of thin filers with limited data. Our study can contribute to resolving the financial exclusion issues faced by thin filers and facilitate additional revenue within the financial industry.