• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1077-1080
• /
• 1991

It has been recognized as important subject by users that PID-Controllers widely used in industrial processes must be well-tuned, In this paper, We present an automatic tuning method for PID-Controllers which is based on discrete parameter estimation and application of conventional tuning-rules. The method is easy to implement on microprocessor because critical values are obtained by the mathematical computation. Also, it permits quick on-line tuning. Simulation results show that most processes are well tuned by the suggested tuning method in this paper.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.785-787
• /
• 1999

In this paper, recursive least square algorithm is presented to estimate the parameters of step motor under low-speed operation. Parameter estimation is important for compensating the input current by calculating the ratio of the motor torque constant and detent torque constant that causes torque-ripple in low-speed applications. On-line parameter estimation process is a preliminary procedure to apply step motor to adaptive control. Computer simulation shows that the estimated parameters converge in finite time.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.7-26
• /
• 1996

The estimation of real-time Origin-Destination(O-D) parameters, which gives travel demand between combinations of origin and destination points on a urban freeway network, from on-line surveillance traffic data is essential in developing an efficient ATMS strategy. On this need a real-time O-D parameter estimation model is formulated as a parameter adaptive filtering model based on the extended Kalman Filter. A Monte Carlo test have shown that the estimation of time-varying O-D parameter is possible using only traffic counts. Tests with field data produced the interesting finding that off-ramp volume predictions generated using a constant freeway O-D matrix was replaced by real-time estimates generated using the parameter adaptive filter.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.388-390
• /
• 1995

A new control scheme based on dead beat control with adaptive parameter estimation for PWM Inverter is proposed. The proposed scheme updates dead beat control parameters continouously, and make PWM inverter excellent performance at any load or parameter condition. Simulation results show very attractive features in this proposed scheme.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.68-75
• /
• 2004

In this paper, an estimator with an appropriate adaptive law for updating parameters is designed and analyzed based on the Lyapunov theory. The adaptive law is designed so that the estimation model follows the parameterized plant model. Using the proposed estimator, the parameters of the T-S fuzzy model can be estimated by observing the behavior of the system and it can be a basis for indirect adaptive fuzzy control.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.178-181
• /
• 1995

In this paper, on-line adaptive friction compensation scheme for the precise position control is presented. 2 DOF system with compliance and friction is used for the plant model. In order to reduce the calculation time for the parameter estimation, 1 DOF estimation model is used. The computer simulation and experimental results show the validity of the supposed scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.76.5-76
• /
• 2001

This paper considers the parameter estimation for the state-space model based time-delay systems in the case that the Lyapunov stability of the system is guaranteed. In order to estimate the parameters, two estimation methods can be proposed which are known as the parallel model and the series parallel model. It is shown that the parameters can be estimated using each method, and also certied that the results are correct by simulations.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.386-391
• /
• 1998

Parameter estimation method of induction motor for vector control is presented in this paper. It can be easily implemented and applied to inverters in the industrial field, because it needs no additional hardware such as voltage sensors and measuring equipment. The proposed algorithm in this paper is so straightforward and practical that it can be easily implemented on the built-in controllers with little overhead. The proposed estimation algorithm has good accuracy and repeatability for parameters due to the sensitivity of estimation errors. This enables its total consuming time to be made shorter. Experimental results and applications in the industrial fields verify the validity and usefulness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.174-180
• /
• 1996

The friction is one of the nonlinearities to be considered in the precise position control of a system which has electromechanical components. The friction has complicated nonlinear characteristics and depends on the velocity, the position and the time. The conventional fixed friction compensator and the controller based on linear control theory may cause the steady state position error or oscillation. The plant to be controlled in this study is a positioning system with a linear brushless DC motor(LBLDCM). The system behaves like a 4th-order model including the compliance and the friction. In this study, the plant model is simplified to a 2nd-order model to reduce the computation in on- line estimation. Also, to reduce the computation time, only the friction is estimated on-line while the mass and the viscous damping coefficient are fixed to the values obtained from off-line estimation. The validity of the proposed scheme is illustrated with the computer simulation and the experiment where the friction is compensated by using the estimation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.518-523
• /
• 2017

This paper proposes a novel denoising method based on non-local(NL) means. The NL-means algorithm is effective for removing an additive Gaussian noise, but the denoising parameter should be controlled depending on the noise level for proper noise elimination. Therefore, the proposed method optimizes the denoising parameter according to the noise levels. The proposed method consists of two processes: off-line and on-line. In the off-line process, the relations between the noise level and the denoising parameter of the NL-means filter are analyzed. For a given noise level, the various denoising parameters are applied to the NL-means algorithm, and then the qualities of resulting images are quantified using a structural similarity index(SSIM). The parameter with the highest SSIM is chosen as the optimal denoising parameter for the given noise level. In the on-line process, we estimate the noise level for a given noisy image and select the optimal denoising parameter according to the estimated noise level. Finally, NL-means filtering is performed using the selected denoising parameter. As shown in the experimental results, the proposed method accurately estimated the noise level and effectively eliminated noise for various noise levels. The accuracy of noise estimation is 90.0% and the highest Peak Signal-to-noise ratio(PSNR), SSIM value.