• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.954-963
• /
• 2006

PRT(Personal Rapid Transit) is alternation mode of auto and advanced transportation system as future transportation mode cope with the situation caused by increasing traffic demand, vehicle, environment, energy problem. but there is no place where PRT is operated therefore it is necessary of study on application of PRT The purpose of this study is putting into shape of fundamental notion and role of PRT as transit system and studying of domestic application possibility We expect that PRT make transit will make variety and be able to connect with mass transportation facility, have a connection between trunk line and branch line, be a effective local transportation system within CBD, be a transportation system within leisure complex. This study focus on connection with mass transportation facility in the middle of 5 type, we class as. and we investigate application of PRT by process of making a choice applicable case area

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.8
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.377-382
• /
• 2013

A convergence software development methodology based on product line engineering provides an architecture model for application development and it also provides workflow as a behavior specification of control component development to develop transaction centric application. To effect a change on software development based on product line engineering it has to be supported by a tool. But almost workflow modeling tools dose not support product line engineering concept. So we need new workflow modeling tool to support the convergence software development methodology. In this paper, we introduce a toolset for workflow modeling that consists of eclipse plug-in applications and open source tool and describe the relationships of tools through example.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.542-544
• /
• 2005

Recently, the principal processes of T/L design tend to computerize and therefore integrated T/L design system has been developed. Since, it makes the automatic selection of T/L route, tower position and optimum design possible, computerized design method is applied all over the world. KEPCO introduced Optimal PowerLINE for T/L design in Myanmar 500kV project that is as a part of overseas project. And as a result of that work, effective and economical design was carried out. This paper presents the comparative analysis between Previous method and Optimal PowerLINE method for investigating practical application to Myanmar 500kV T/L design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4234-4243
• /
• 2012

USN(Ubiquitous Sensor Network) application S/W has a complex characteristic that it controls various kind of sensor nodes organically based on the core modules of various target operating systems. Currently, various researches for efficient S/W development are being performed in USN application field. In order to increase S/W productivity, the method such as product line development approach to specify core common functions of applications according to the domain and develop applications with the core common functions and variant functions selected according to the workflow of applications is efficient. To apply this approach to the USN domain, characteristics of USN application S/W and product line development should be specified with one consistent view. However, it is difficult to efficiently specify the characteristics using general UML notations. In order to solve the problem, this paper proposes a method to effectively specify the characteristics of USN applications and product line development using UML profile which is the extension mechanism of UML. The proposed UML profile for produce line based USN application development enables developers to effectively develop product line based USN applications using existing UML and UML support tools without new design methods or tools which are specified for USN or product line development.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.60-67
• /
• 2004

The recent movement to deregulated and competitive electricity market reacquires new concepts against existing central dispatch in the system operation and pinning. As power systems tend to be operated more closely to their ultimate ratings, the role of SCOPF (Security Constrained Optimal Power flow) is changed and the importance for real-time security inhancement will be more increased i]1 the new and com partitive electricity market. This paper deals with the application of the SCOPF which makes possible the On-Line application. The security margin of power system truly is changed according to the conditions or configuration of power systems, therefore, the sensitivity factor reiated to the security is recalculated and the application should be updated in accordance with the state of power system. The goal of this paper is to obtain proper security through the effluent usage of the sensitivity and to apply this a1gorithm to system operation. The proposed mechanism has been tested on a sample system and the results show more secure conditions against critical contingencies.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.522-529
• /
• 2010

Distance relay plays an important role in the protection of transmission lines. The application of flexible AC transmission systems (FACTS) devices, such as the static synchronous compensator (STATCOM), could affect the performance of the distance relay because of compensation effect. This paper analyzes the application of distance relay on the protection of a transmission line containing STATCOM. New setting principles for different protection zones are proposed based on this analysis. A typical 500 kV transmission system employing STATCOM is modeled using Matlab/Simulink. The impact of STATCOM on distance protection scheme is studied for different fault types, fault locations, and system configurations. Based on simulation results, the performance of distance relay is evaluated. The setting principle can be verified for the transmission line with STATCOM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.159-165
• /
• 2009

In this study, using a periodical ground structure(PGS) on GaAs monolithic microwave integrated circuit(MMIC), transmission line with a high isolation characteristic was developed for application to compact signal/bias lines of highly integrated MMIC. And the origin of the high isolation characteristic was theoretically investigated. The high isolation characteristic was originated from a resonance between adjacent microstrip lines employing PGS. With only a spacing of $20{\mu}m$, the coupled microstrip line employing PGS showed an isolation value of -47 dB at 60 GHz. The frequency range for high isolation was easily controlled by changing the PGS structure. Above results indicate that microstrip lines employing PGS are very useful for application to compact signal/bias lines of highly integrated MMIC requiring a high isolation characteristics between lines. In addition, equivalent circuit employing closed-form equation for the coupled line with PGS was also extracted.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1061-1064
• /
• 1987

This paper describes the procedure of recognizing the On-line Korean characters which are written on a graphic tablet. The effective recognition of primitives is performed by the use of stroke unit proceeding instead of coordinate unit under the base of definition of characteristic points which are fit to Korean character through the application of the characteristics of korean characters & input data on graphic tablet.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1097-1101
• /
• 2009

College's existence is threatened through the decreasing of students, even though it made big growing. In these situations, College makes on-line contents for promotion and announce information of college. However, previous research has limit about statistic theory with influence of application and registration with an applicant for admission to a college. In this paper, we analyze difference of application and registration in period of application, and find the difference recognize rate with students by period of application.