• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.95-102
• /
• 2013

Recently (2010), South Korea's aging rate is 11%. and expected to be 32.3% in 2040, and Japan's aging rate in 2010 is 23%, and in 2040 is expected to be 34.5%. As aging progresses, it is increasing with the elderly person with dementia. However, elderly welfare facilities are insufficient. To take care stability of elderly people with mental and physical disabilities, we need to prepare a lot of welfare facilities for the elderly. Whenever physical conditions and service needs change of the disability elderly, Elderly are forced to move to the other facility. They move from familiar places, beloved local base to unfamiliar places. They are under a lot of stress in order to adapt to new environment. This research is to check out the possibility of the systems and the effectiveness of various services and the flexibility of management in Japan. Takurosyo is responsible for a variety function of elderly medical welfare facilities. Within a short time, our country, has entered into a super-aged society, elderly health and welfare facilities are needed. However, because it requires enormous financial, it is difficult to build a new building in reality, However, if remodeling existing buildings, We can build many low-cost small-scale multi-functional welfare facilities such as the takurosyo. Such that facility would be available to us.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4100-4107
• /
• 2010

The wrecker truck of lift type is used to move damaged car in accident spot or to move illegal vehicle in towaway zone toward pound.. This special vehicle drives by lifting front or rear side of car with the driving type of towed car. Each car is modelled with CATIA and is simulated with FEM analysis program ANSYS. This study analyzes how dangerous is the triple collision among the wrecker-towed car-driving car as comparing with the usual collision accident with cars. It is studied how responsible is the towed car in case of crashing its back side by driving car. The influence on the driving angle of towed car by lifting wrecker is also considered.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.337-342
• /
• 2015

SMT is an equipment that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. There are 16 different types of routes in this process. This paper presents the fastest algorithm to place (sLa-Camera-pLb) among all these routes. In order to do this, instead of stopping in front of camera the object should move on while going over the vision inspection. Among all possible tracks, this thesis will provide algorithm to find out the fastest tracks to do vision inspection and placing. And as a result, this thesis have demonstrated that this method can save about 16% of time compared to going over inspection while the object is standing still through simulation.

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.293-304
• /
• 2005

This experiment was carried out to investigate effects of honeybee venom treatment on the body weight gain, feed conversion and growth rate' in pigs. One hundred twenty nine piglets(LY) from 12 sows were allocated into two groups; honeybee venom-treated group (66 piglets from 6 sows) and non-treated control group (63 piglets from 6 sows). Natural honeybee venom was administrated at 0, 3, 14, 30, and 74 days after birth. The acupoints were Hai-men(ST-25), Du-kou(CV-8) and liao-chao(GV-I) points at 0 day, the regions of castration and tail ampution at 3 days, liao-chao(GV-1) and Bai-hui(GV-20) points at 14(weaning), 30(move into piglet stall) and 74(move into grower stall) days after birth. Control group was injected 1 ml of saline to the same site. Average body weight at 150 days after birth was 98.44 kg in bee venom treated group and 86.24 kg in control group, respectively. Average body weight of treated group was significantly increased by 14.15%(P < 0.0001). Average daily gain of bee venom treated group and control group were 649 g and 569 g, respectively, increased by 14.06%(P< 0.0001). Feed conversion of the treated group was 2.21 and control group was 2.49, increased by 11.25% in control group(P < 0.001). Survival rate at weaning was 95.5 % in treated group and 92.0% in control group, at growing(74 days after birth) was 92.4% in treated group and 85.7% in control group and survival rate at finishing(l50 days after birth) was 89.5 % and 79.4 %, respectively. Collecting together, the results in this study showed that growth performance and feed conversion were increased by treatment of natural honeybee venom to pigs. These results suggested that the treatment of bee venom could be used effectively for the increase productivity of livestock industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.943-950
• /
• 2002

Real time strategy game is a computer game genre of Playing with human or computer opponents in real time It differs from turn-type computer games in the game process method. Turn type games, such as chess, allow only one Player to move at a time. Real time strategy games allow two or more Players to move simultaneously. Therefore, in real time strategy computer games, the game components' movement plans must be calculated very quickly in order to not disturb other processes such as gathering resources, building structures, and combat activities. There are many approaches, which can reduce the amount of memory required for calculating path, search space, and reactive time of components. (or units). However, existing path finding algorithms tend to concentrate on achieving optimal Paths that are not as important or crucial in real time strategy game. This Paper introduces Dynamic Heuristic Af(DHA*) algorithm which is capable of reducing search space and reactive time of game units and compares with A* algorithm using static heuristic weighting.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.147-156
• /
• 2008

Objectives : Oriental Medicine Music Therapy is a new way of treating and preventing various diseases and promoting health by means of music specially picked and designed to produce Qi(氣) fitting to an individual person in the areas of the structure of human body, physiological function, pathological change, diagnosis and treatment. Therefore, it can facilitate the efficiency of the treatment much better and faster than only with herb or acupuncture. Equilibrium between body and mind is its originality. Methods : A 38-year old man came to hospital suffering from left side weakness, dysarthria because of cerebral infarction. After one week's medication in the part of neurology, he was sent to the oriental medicine music therapy center, and he took ten times' medical treatments once a day. Before and after the treatments, implementing 'Ink foot print analysis', as for the movement capacity and walking of left side weakness, these results are acquired. Results and Conclusions : 1. Before the oriental medicine music therapy, except the acceleration and deceleration section, within three meters, a right foot's step was measured 30.55 cm and a left foot was measured 15.2 cm, and the step distance was 15.2 cm. After the 10 times treatments, the right foot's step was 112.6 cm, the left foot's step was 113 cm, and the step distance improved to 51.8 cm. 2. The normal person's average step is about 38 cm, and it could be decreased owing to a decreptitude, pain, fatigue, and the weakness of the legs. In spite of all, from the increased 50 cm step measurement with the patient's body condition, it means that his movement capacity is recovered. 3. In the measurement of walking time, before 10 times treatments, it took 46.35 seconds within 6M, but after the treatments, it increased to 7.47 seconds as same as a normal person's walking speed. 4. In insomnia, and the abnormality of a facial muscle, it shows lots of improvement, and even the accuracy of a pronunciation, but despite of the 10 times treatments, the 'ㄹ(r)' sound placed under a vowel is unclear. 5. Before the 10 times' treatments, he can move the left side shoulder with pain and cannot move below the left elbow. After the treatments, the pain was disappeared, and he was able to move over 60 cm without pain. And improving of the movement of fingers, he can beat over 8 times with a drumstick.

• Informatization Policy
• /
• v.21 no.3
• /
• pp.33-55
• /
• 2014

Public Shared Service Centers (PSSC) consolidate functions such as human resources, information technology, financial management or accounting into one office to serve an organization. A prominent example from the United States is the Federal Information Technology Shared Services Strategy. It supports mission, administrative, and infrastructure-related IT functions through providing organizations in the Executive Branch of the Federal Government (Federal Agencies) with policy guidance on the full range and lifecycle of intra- and inter-agency information technology (IT) shared services. This study looks at the Federal Information Technology Shared Services Strategy in order to draw lessons for fostering collaborative government through the use of PSSC. It finds the following factors are critical for success when implementing IT shared services: (1) agency leadership must be solidly behind their IT shared service plan, or the needed changes will not happen at the business unit, program, or system levels; (2) there must be a move away from internally-centered, program-specific thinking, and a move toward a paradigm of consuming and providing IT shared services with multiple groups whenever possible; and (3) successfully managing "loss of control" issues is central, and optimizing business processes is essential to move from stove-piped workflows to processes that work across the agency enterprise and beyond. Therefore, the study suggests that a Korean model of PSSC implementation be introduced, and that good IT Governance is a crucial component of PSSC strategies.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.389-395
• /
• 2015

Digital image provides many conveniences at the internet environment recently. A great number of applications, like Digital Library, Stock Image, Personal Image and Important Information, require the use of digital image. However it has fatal defect which is easy to be modified because digital image is only electronic file. Numerous digital image forgeries have become a serious problem due to the sophistication and accessibility of image editing software. Copy-Move forgery is the simplest type of forgery that involves copying portion of an image and paste it on different location within the image. There are many approaches to detect Copy-Move forgery, but all of them have their own limitations. In this paper, visual and invisible feature based forgery detection techniques are tested and analyzed. The analysis shows that pros and cons of these two techniques compensate each other. Therefore, a hybrid of visual based and invisible feature based forgery detection that combine the merits of both techniques is proposed. The experimental results show that the proposed algorithm has enhanced performance compared to individual techniques. Moreover, it provides more information about the forgery, like identifying copy and duplicate regions.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.209-216
• /
• 2003

The purpose of this study is to develop furniture design for work space of Office based on the research of furniture design and the survey on the design of the office furniture. The office furniture Is designed in order to use the space flexibly and for the user design in the work space. The furniture type of solo worker on characteristic kinds of works should have a simple shape and it should be safe and easy to move because it has a structural function. The furniture in office should be designed in consideration of moveing line while working. The development of furniture in office which suit human body should be made in consideration of human factors and the study on furniture design in office. As above mentioned, to research and study on the furniture design of working furniture in office which reduces fatigue resulted from labor for office, human factors aspect should be considered, furthermore psychological, mental approach to Ideal solution should be made.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.2
• /
• pp.66-74
• /
• 1971

The general morphological characteristics of scales on the body surface in Cyprininae fishes can be summarized as follows: 1) The lentic and lotic habitats have no relation to the phase of scales. 2) The scales in the anterior body parts have transverse diameters longer than their longi-tudinal diameters: in the posterior body parts, the opposite holds true. 3) The scales having the largest diameters, both longitudinal and transverse, are the lateral line scales. 4) The position of the focus on each scale move posteriorly as the scale grows. In other words, the forward growth of the scales exceeds the backward. 5) The number of ridges in each scale is in proportion to longitudinal diameter. 6) In Cyprinus, the scales on the middle part of the body surface have more grooves than those on the other parts. All scales on this species commonly show incompleted grooves on the anterior and posterior areas, but the lateral area lacks grooves entirely. 7) In Carassius, there are more completed grooves than incompleted grooves. All grooves are arranged in radial patterns on the scales.