• 한국통신학회논문지
• /
• 제24권6B호
• /
• pp.1074-1079
• /
• 1999

155.52 Mbps STM-1급 디지털 통신용 고성능 CMOS 리시버 칩을 설계 제작하였다. 제작된 리시버는 전송선로의 단락 또는 송신 중단 등으로 인해 데이터신호가 입력되지 않거나, 정전 발생 또는 시스템의 유지보수 등으로 인해 전원이 차단되었다가 복구될 때에도 155.52 MHz의 클락 주파수를 유지하여 항상 안정된 동작을 할 수 있는 구조로 이루어진다. 이를 위해 설계된 회로는 PLL을 기본으로 한 데이터 및 클락 복원회로 외에 데이터 감시회로와 전원 감시회로도 내장한다. 측정 결과 제작된 IC는 데이터신호가 입력되는 정상적인 상황에서뿐만 아니라, 데이터신호가 입력되지 않는 비정상적인 상황하에서도 항상 155.52 MHz의 안정된 클락을 발생시키고 있음을 알 수 있었음, PLL 루프의 실효 지터도 23 ps로 우수한 특성을 나타내었다.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.1-15
• /
• 2017

Installation of sensors networks for continuous in-service monitoring of structures and their efficiency conditions is a current research trend of paramount interest. On-line monitoring systems could be strategically useful for road infrastructures, which are expected to perform efficiently and be self-diagnostic, also in emergency scenarios. This work researches damage detection in composite concrete-steel structures that are typical for highway overpasses and bridges. The techniques herein proposed assume that typical damage in the deck occurs in form of delamination and cracking, and that it affects the peak power spectral density of dynamic curvature. The investigation is performed by combining results of measurements collected by long-gauge fiber optic strain sensors installed on monitored structure and a statistic approach. A finite element model has been also prepared and validated for deepening peculiar aspects of the investigation and the availability of the method. The proposed method for real time applications is able to detect a documented unusual behavior (e.g., damage or deterioration) through long-gauge fiber optic strain sensors measurements and a probabilistic study of the dynamic curvature power spectral density.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1032-1038
• /
• 2008

KTX train system is composed of TORNAD* network for transmitting information of train's internal equipments and OBCS which proceed information within train. OBCS of one trainset consisted of 28 equipments takes intelligent and dynamic composition according to equipment handling, train command and control flow. Each OBCS which is installed within trainset handle and supervise mutually action information about equipments, transmit it to driver to transmit information about train operation and preventive management. This mutual supervision and information transmission use KTX TORNAD* network system. TORNAD* network system is the one which is uniquely developped by GEC ALSTHOM, the KTX trainset manafacturing provider and this field is excluded from technical know-how transfer item. Through the research on analysis method of KTX TORNAD* system data structure which is operating on Seoul-Pusan Line, I hope that this thesis can contribute to train network system's standardization after applying it to improvement of train network system maintenance, enhancing quality of train service and applying it to future Korean rolling stock network system development.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1058-1064
• /
• 2004

As one of reinforcing methods for soft roadbed, the problems that mud-pumping and settlement occurred by soft roadbed, were investigated, evaluated and analyzed through installing relatively economical and efficient geosynthetics on the selected track-bed for testing. Mock-heang to Dong-ryang on the filed resting sections in the Chung-buk lines were selected as investigating the state of track and prepared field after selecting three of 1,700 spots which often make mud-pumping and requiting maintenance for that. Long curved line radiuses(R) of Mock-heang to Dong-ryang are 500m that were installed with 4 types of geosynthetics layers and one ballast layer. Installed testing cross-section is 200m totally with 40 m between places. Strength or prepared roadbed was measured to investigate the state of roadbed and track with constructing(installing) field testing sections and physical properties of roadbed soils were evaluated and analyzed. Also, mud-pumping, settlement of elastic or plastic sleeper, failure or track, wheel-loads, transverse and earth pressures were measured after installing field testing sections.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.108-112
• /
• 2023

Precision manufacturing technology is rapidly developing due to the extreme miniaturization of semiconductor processes to comply with Moore's Law. Accurate and precise alignment, which is one of the key elements of the semiconductor pre-process and post-process, is very important in the semiconductor process. The center detection of wafer align marks plays a key role in improving yield by reducing defects and research on accurate detection methods for this is necessary. Methods for accurate alignment using traditional image sensors can cause problems due to changes in image brightness and noise. To solve this problem, engineers must go directly into the line and perform maintenance work. This paper emphasizes that the development of AI technology can provide innovative solutions in the semiconductor process as high-resolution image and image processing technology also develops. This study proposes a new wafer center detection method through variable thresholding. And this study introduces a method for detecting the center that is less sensitive to the brightness of LEDs by utilizing a high-performance object detection model such as YOLOv8 without relying on existing algorithms. Through this, we aim to enable precise wafer focus detection using artificial intelligence.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.63-68
• /
• 2017

무인 운전 도시 철도시스템은 기관사 없이 열차를 운행 할 수 있는 장점을 갖지만, 이례상황 발생 시 유인운전의 기관사처럼 즉각적인 고장상태 파악, 관제보고, 수동조치가 어렵다. 따라서, 본선 운행 동안 차량 고장 / 상태 정보를 실시간으로 검지하여 차량기지 입고 시에 효율적으로 정비할 수 있는 유지보수 정보시스템의 구축이 필요하다. 본 논문에서는 무선통신망을 활용한 열차제어시스템, 관제 - 열차제어 정보시스템 콘솔 및 차량기지 유지보수 정보시스템간의 인터페이스를 실시간으로 구현하는 개념설계 방안을 제안하였다. 우선적으로 운행 중 발생되는 800,000 건/일의 많은 열차 상태 정보를 전송하기 위하여 본 연구에서 제안한 데이터 처리 알고리즘을 이용하여 56byte의 데이터 테이블로 수집한다. 이러한 상태 정보를 4자리의 헥사 코드화하여 분류하고, 본선 운행 동안 실시간으로 전동차 상태와 고장정보를 맵핑함으로서, 차량기지 내에 차량 유지보수 정보시스템에 전송한다. 또한 열차제어 정보시스템과 차량기지 유지보수 정보시스템 간에 실시간으로 송 / 수신 데이터의 전송을 각각 확인하고, 이로부터 현장에서 사용하도록 고장정보 화면구현을 구현하였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.101-107
• /
• 2020

노면측정은 노면 관리에서 노면의 평탄화된 정도 및 변위를 정량화하는 필수적인 과정이다. 보다 안전한 노면 관리 및 신속한 유지보수를 위해 이동체에서의 정밀한 노면 측정은 매우 중요하다. 본 논문에서는 이동체에서 측정가능한 정밀 노면측정 시스템을 제안한다. 제안 노면측정 시스템은 고성능의 선레이저 센서를 사용하여 노면 표면의 정밀한 측정을 지원한다. 또한 RTK로 부터 획득한 위치 데이터를 정합하여 종/횡방향 프로파일 측정이 가능하고 속도기반 적응적인 갱신 알고리즘을 통해 실시간적인 모니터링이 가능하다. 제안 시스템을 평가하기 위하여 Gocator 선레이저 센서, MRP 모듈, 및 NVIDIA Xavier 프로세서를 시험용 이동체에 탑재하여 노면에서 시험하였다. 시험 결과 MSE(mean square error) 기준 정확한 프로파일 측정이 가능함을 보인다. 제안 시스템은 도로의 상태 평가뿐 만 아니라 인접 지반의 영향도 평가에 활용될 수 있다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권2호
• /
• pp.118-122
• /
• 2000

A comlementary call line CR2 is curretly used to propagte the Disabled Infectious Single Cycle Herpes Simplex Virus Typee2 (DISC HSV-2) on a small Iaboratory scale upto 15 L. These cultures are initiated by passaging the cells from roller bottle cultures. Whilst this is suitable for the laboratory scale it is totally impractical for use in seeding an industrial manufacturing scaled version of the culture. It is paramount to have a robust system for passaging cells from a small microcarrierier culture system to a larger one by a serial subculturing regime. Here we report on the successes we have had in our laboratory in scaling up out production system for the DISC HSV-2 from small 1-L cultures to a 50-L vessel with the maintenance of the viral productivity. Ease of use, reproducibility and the need to minimise overall production time were factors which were taken into consideration whils developing our procedures. We were aware of the need to keep a production train simple and as short as possible as this was the amall scale study for an envisaged manufacturing process.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.345-350
• /
• 2008

This study aims to propose the concept design of oil spill protection robot which can rapidly intervene to control the oil spillage situation at the sea. Taking into account the fact that a huge amount of oil is transported trans-continentally by oil tanker, none of industrialized countries are completely safe from the marine oil spill which results in social, economical and ecological damages to their communities. The employment of double hull-oil tanker, pipe line transporting can be most safe way. Yet complete prevention of oil spill is probably not realistic. Accordingly the alternative solution to control marine oil spill and minimize the damages caused by the incident using intelligent robot technology based on swarm control method is proposed. The main features of oil spill protection(OSP) robot is explained via following three perspectives. Firstly, from functional point of view, OSP robot system safely and efficiently replaces oil boom installation manually conducted by human workers with intelligent robot technology based on swarm control theory. For second, its modular architecture brings efficient storage of main components including oil boom and facilitates maintenance. For the last, its geometric form and shape enables whole system to be installed to helicopter, boat or oil tanker itself with ease and to rapidly deploy the units to the oil spill area.