• 제목/요약/키워드: On/off ratio

검색결과 1,368건 처리시간 0.028초

상충관계이론과 자본조달순위이론에 기초한 병원 자본조달행태 분석 (Hospital's Financing Behaviors Based on Comparative Analysis of Trade-off Theory and Pecking Order Theory)

  • 김재명;함유상;안영창
    • 한국병원경영학회지
    • /
    • 제11권2호
    • /
    • pp.61-86
    • /
    • 2006
  • Based on a previous literature about hospital capital structure(Shyam- Sunder & Myers, 1999), this study attempted comparison and analysis on whether the forecast of trade-off and pecking order theory could be validated in hospital's capital structure. First, this study analyzed whether hospitals follow the priority for each capital source as suggested by pecking order theory under lack of capital running in hospital. Next, it analyzed whether debt level is regressed on the average to target debt level so as to verify the validity of trade-off theory. Finally, it also analyzed possible associations between debt level and determinants of capital structure as adopted in static trade-off theory, so as to verify relative advantages of these two theories about hospital capital structure. The analysis over whole period showed that both trade-off theory and pecking order theory isn't supported particularly. This mean that each hospital's financing behaviors is different and that has not dominant financing behaviors. In the midst of separation of dispensary from medical practice, medical institutions in Korea first finances funds required using retained earnings and then use liabilities. however pecking order theory is supported, the preference of long-term liabilities and short-term liabilities is not clear. In addition, considering that debt level is in no average regression to target debt ratio, it is found that hospital capital structure following trade-off theory turns into that subject to pecking order theory via the separation of dispensary from medical practice.

  • PDF

음성강화를 위한 시간 및 주파수 도메인의 분산정규화 기반 잡음예측 및 저감방법 (Nose Estimation and Suppression methods based on Normalized Variance in Time-Frequency for Speech Enhancement)

  • 이수정;김순협
    • 대한전자공학회논문지SP
    • /
    • 제46권1호
    • /
    • pp.87-94
    • /
    • 2009
  • 잡음예측 및 저감방법은 음성통신과 인식분야의 중요한 핵심기술이다. 본 논문에서는 다양한 잡음환경에 적용할 수 있는 새로운 잡음예측 및 저감 방법을 제안한다. 제안된 알고리즘은 시간 및 주파수영역의 noisy power spectrum 의 분산과 그 값의 정규화 ratio를 기반으로 한다. 제안한 방법은 다양한 잡음환경에서 잘 동작 할 수 있도록 적응추적 임계값을 사용하며, 이 임계값은 음성왜곡과 잔여잡음 사이의 trade-off를 제어한다. 새로운 알고리즘의 성능은 다양한 잡음환경에서 ITU-T P.835(SIG) and segment (SNR) 의해 평가하여 기존의 방법에 비해 향상된 결과를 나타냈다.

2009 KSTAR ICRF 방전세정 플라즈마의 불순물 제거 특성

  • 김선호;왕선정;곽종구;김성규
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.296-296
    • /
    • 2010
  • ICRF 시스템을 이용한 방전세정인 ICWC(Ion Cyclotron Wall Cleaning)는 ITER와 DEMO 같은 초전도 자석을 이용하는 토카막에서 토카막 shot 중간에 자장을 낮추지 않고 바로 방전 세정을 할 수 있는 방법이다. 토카막에서 방전세정은 탄소나 산소 화합물과 같은 불순물을 제거하여 방사에 의한 플라즈마 냉각을 막고 토카막 초기 start-up시 진공 챔버 벽면으로부터 의도하지 않은 연료주입을 제거하는 역할을 한다. 본 연구에서는 ICWC 방전 세정 최적화를 위해 플라즈마의 불순물 제거 특성을 수소 유량의 크기와 ICRF 펄스의 duty ratio를 바꿔가면서 관찰하였다. ICRF 전력은 44.2 MHz에서 20-50 kW 가 입사되었으며 자장은 3 T에서 고정되었다. 운전압력은 $10^{-4}$ mbar 정도이다. 헬륨의 유량을 400 sccm으로 고정한 후 수소의 유량을 40 sccm에서 160 sccm까지 증가시켜가면서 제거율을 관측하였다. 그 결과 수소 유량의 증가에 따라 제거율이 증가하는 불순물과 오히려 감소하는 불순물이 있음이 관측되었다. 제거율이 증가되는 불순물 group은 charge-to-mass ratio가 26, 28, 40, 44이고 감소하는 불순물 group은 18, 20, 32 이다. 펄스의 duty ratio를 1/9(on/off) 초에서 5/5(on/off) 초로 증가시킴에 따라 제거율이 증가하는 불순물과 감소하는 불순물이 또한 나타났는데 수소 유량 실험과 그 group에 차이가 없었다. 이러한 실험결과는 수소 유량의 증가나 펄스 길이의 증가에 따라 가스의 종류에 관계없이 모두 증가하거나 감소할 것이라는 예측과는 다른 결과로서 이것에 대한 명료한 해석이 필요하다. 왜냐하면 위와 같은 운전조건에서 효율적인 불순물 제거를 위해서는 불순물 제거 운전 방법이 불순물의 종류에 따라 모두 달라져야 하기 때문이다. 본 연구에서는 이러한 특성을 불순물의 dissociation 에너지 관점에서 해석을 시도하였다.

  • PDF

AWJM을 이용한 Al6061 절단조건 최적화에 관한 연구 (A Study on the Optimization of Machining Process for Al6061 Using the AWJM)

  • 이재광;민병현;예상돈;제원수
    • 한국기계가공학회지
    • /
    • 제5권3호
    • /
    • pp.65-70
    • /
    • 2006
  • The AWJM(Abrasive Water-jet Machining) technology is one of the cutting technologies, which can cut various materials with 2 or 3 times of the speed of sound. In this study, processing conditions such as jet-pressure, cutting speed, orifice diameter and stand-off distance, are used by following the design of experiments with 3 levels. Al6061 material which is normally applied on the field, is applied. Through the S/N ratio analysis with measured values, the optimization value of processing conditions to minimize the surface roughness and taper value is obtained. The order of significance is as follows; jet pressure, cutting speed, abrasive mixing ratio, orifice diameter and stand-off distance. RSM(Response Surface Method) is applied to find the optimal processing conditions to minimize both the surface roughness and the taper value by using jet pressure, cutting speed and abrasive mixing ratio.

  • PDF

한국 남동 대륙주변부 니질대 표층퇴적물의 유공충 특성 (Foraminiferal Characteristics in Mud Deposits of the Southeastern Margin of Korea)

  • 우한준;최재웅
    • Ocean and Polar Research
    • /
    • 제28권2호
    • /
    • pp.67-78
    • /
    • 2006
  • Six surface sediments from two offshore transects of Ulsan and Gampo, on the southeastern margin of Korea were taken for sediment and foraminiferal analyses. Sedimentary processes are dominated by reworking and resedimentation from storms in the area off Ulsan and hemipelagic suspension settling in the area off Gampo. Eighty-four foraminiferal species were identified in total assemblages, including 33species of living populations and 9 species of planktonic foraminifera. The characteristics of foraminifera showed differences of offshore environments between Ulsan and Gampo. The number of living species, species diversity and equitability in Gampo offshore area had higher values than those in Ulsan offshore area. However, planktonic/benthic(P/B) ratio showed higher in the Ulsan offshore area. The species diversity indices and P/B ratio indicated that environmental stability and surface-ocean productivity in the Gampo offshore area were relatively higher than the Ulsan offshore area. The difference of species compositions is useful for interpreting the paleoenvironments in mud deposits of the southeastern margin of Korea.

MRV형 LNG선의 선체온도분포 및 증발률 산정에 관한 연구 (A Study on the Computation of Hull Temperature Distribution and Boil off Ratio of MRV Type LNG Carrier)

  • 천병일;김용모;김경근
    • 대한기계학회논문집
    • /
    • 제18권4호
    • /
    • pp.986-996
    • /
    • 1994
  • Insulation system of LNG carrier has made important roles such as maintaining a proper Boil off Ratio(BOR) for the cargo and avoiding the excessive low temperature of the adjacent inner hull beyond the permissible limit. At the same time, safety and economy of the LNG transportation by the ship are connected with the performance of the insulation system. Also, thermal insulation system of LNG carrier is one of the most advanced technique with the structure analysis of tank, welding and assembling. In this study a computer program is developed to calculate the hull temperature distribution and BOR, which are important factors in thermal design for the Moss Rosenberg Verft spherical tank type LNG carrier. Detailed results for hhull temperature distribution close to LNG tank, BOR and the thickness effect of insulation material are reported in this paper in the range of standare design sea condition.

Ultraviolet and visible light detection characteristics of amorphous indium gallium zinc oxide thin film transistor for photodetector applications

  • Chang, Seong-Pil;Ju, Byeong-Kwon
    • International journal of advanced smart convergence
    • /
    • 제1권1호
    • /
    • pp.61-64
    • /
    • 2012
  • The ultraviolet and visible light responsive properties of the amorphous indium gallium zinc oxide thin film transistor have been investigated. Amorphous indium gallium zinc oxide (a-IGZO) thin film transistor operate in the enhancement mode with saturation mobility of $6.99cm^2/Vs$, threshold voltage of 13.5 V, subthreshold slope of 1.58 V/dec and an on/off current ratio of $2.45{\times}10^8$. The transistor was subsequently characterized in respect of visible light and UV illuminations in order to investigate its potential for possible use as a detector. The performance of the transistor is indicates a high-photosensitivity in the off-state with a ratio of photocurrent to dark current of $5.74{\times}10^2$. The obtained results reveal that the amorphous indium gallium zinc oxide thin film transistor can be used to fabricate UV photodetector operating in the 366 nm.

멀티코드 CDMA 시스템에서 비선형 왜곡에 대처하는 PAPR 저감 기법 (PAPR Reduction Method for the Nonlinear Distortion in the Multicode CDMA System)

  • 김상우;김남일;김선애;서재원;유흥균
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1171-1178
    • /
    • 2005
  • Multi-code code division multiple access(MC-CDMA) 시스템은 다수의 코드 사용으로 인한 용량의 증가를 통해 다양한 속도, 다양한 품질의 서비스를 제공할 수 있다는 장점을 갖는다 그러나, 여러 개의 코드들이 합쳐지면서 PAPR(Peak to Average Power Ratio)이 크게 증가되므로 비선형 왜곡에 의한 시스템 성능이 크게 저하되고, 이를 위해 HPA(High Power Amplifier)에서 많은 양의 back-off를 해야 하므로 큰 전력 손실이 나타난다. 본 논문에서는 들어오는 정보 데이터에 상응하는, 즉 입력 데이터의 상관 관계에 의한 constraint code의 삽입함으로써 PAPR을 효율적으로 낮출 수 있는 방법을 제안한다. PAPR 저감 효과는 사용된 constraint code의 길이와 index에 의존하며, PAPR 저감 효과와 constraint code의 길이 사이에 trade-off가 존재한다. HPA 및 AWGN 채널을 고려한 시뮬레이션 결과에서, 1) Input back-off 없이 가능한 모든 constraint code를 사용해 신호를 선택한 경우와 2) 약간의 input back-off와 몇 가지 constraint code만을 이용해 신호를 선택한 경우에서, BER성능이 선형 HPA를 사용한 OFDM의 성능과 거의 같게 나타남을 확인할 수 있다.

스위칭 소자를 사용한 편파 다이버시티 개구결합 원편파 패치 안테나 (Aperture Coupled Circularly Polarized Patch Antenna for Polarization Diversity using Switching Elements)

  • 윤천수;박동국;양규식
    • 한국전자파학회논문지
    • /
    • 제15권5호
    • /
    • pp.461-466
    • /
    • 2004
  • 본 논문에서는 스위칭 소자를 사용한 새로운 형태의 편파 다이버시티 개구 결합 원편파 패치 안테나를 제안하였다. 제안된 안테나의 구조는 정사각형 패치의 모서리를 왜곡시킨 단일 패치이며, 급전은 전력 분배기 형태의 마이크로스트립 급전에 Schottky 다이오드를 삽입시킨 형태이다. 스위칭 소자인 Schottky 다이오드는 급전의 전력 분배 지점에서 $\lambda$/4 떨어진 위치에 삽입하였으며, Schottky diode의 ON/OFF 동작으로 방사체인 패치의 급전이 변화를 이루어 좌$.$우 선회 원편파로 변화되는 구조로 설계하였다. 스위칭 동작에 의해 측정되어진 안테나의 3 dB 축비 대역폭은 약 2 %로 측정되어졌다.

PNP 게이트를 가지는 폴리 실리콘 박막 트랜지스터의 전기적 특성 (Electrical characteristics of polysilicon thin film transistors with PNP gate)

  • 민병혁;박철민;한민구
    • 전자공학회논문지A
    • /
    • 제33A권3호
    • /
    • pp.96-106
    • /
    • 1996
  • One of the major problems for poly-Si TFTs is the large off state leakage current. LDD (lightly doped drain) and offset gated structures have been employed in order to reduce the leakage current. However, these structures also redcue the oN current significantly due to the extra series resistance caussed by the LDD or offset region. It is desirable to have a device which would have the properties of the offset gated structure in the OFF state, while behaving like a fully gated device in the oN state. Therefore, we propose a new thin film transistor with pnp junction gate which reduce the leakage curretn during the OFF state without sacrificing the ON current during the ON state.

  • PDF