• 공업화학
• /
• 제34권5호
• /
• pp.548-555
• /
• 2023

SAPO-34 catalysts were modified with polyethylene glycol (PEG) and Pb to improve their catalytic lifetime and selectivity for light olefins in the conversion of dimethyl ether to olefins (DTO). Hierarchical SAPO-34 catalysts and PbAPSO-34 catalysts were synthesized according to changes in the molecular weight of PEG (M.W. = 1000, 2000, 4000) and the molar ratio of Pb/Al (Pb/Al = 0.0015, 0.0025, 0.0035), respectively. By introducing PEG into the SAPO-34 catalyst crystals, an enhanced volume of mesopores and reduced acidity were observed, resulting in improved catalytic performance. Pb was successfully substituted into the SAPO-34 catalyst frameworks, and an increased BET surface area and concentration of acid sites in the PbAPSO-34 catalysts were observed. In particular, the concentrations of the weak acid sites, which induce a mild reaction, were increased compared with the concentrations of strong acid sites. Then, the P2000-Pb(25)APSO-34 catalyst was prepared by simultaneously utilizing the synthesis conditions for the P2000 SAPO-34 and Pb(25)APSO-34 catalysts. The P2000-Pb(25)APSO-34 catalyst showed the best catalytic lifetime (183 min based on DME conversion > 90%), with an approximately 62% improvement compared to that of the unmodified catalyst (113 min).

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3765-3770
• /
• 2010

Selective oxidation of olefins has been carried out in water medium with tert-butylhydroperoxide (TBHP, 70% aqueous) as an oxidant using polymer-anchored Ni(II) complex as a catalyst. Several parameters were varied to optimize the reaction conditions. Under the optimized reaction conditions olefins gave selectively allylic oxidation products. The present polymer anchored Ni(II) complex can be recycled five times without any appreciable loss in catalytic activity.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.43-50
• /
• 2001

This paper reviews the results of a series of efforts to develop structure-activity models for slow-reacting chemicals and olefins whose toxicity may be enhanced by the ultraviolet radiation. Photoinduced toxicity of 14 compounds was found to be a different result of competing factors of structure, having carbon-carbon double bonds. To mimic the biological consequences of photooxidative damage in mammalian cells, the photochemical mutagenicith of 14 chemicals was tested in the CAS. Simple olefins were photochemically mutagenic or carcinogenic with irradiation, increasing the alkylating activity from zero level to 0.87(abs/gram) for styrene, 0.25 for 1-butene, 0.11 for 1-hexene, respectively, whereas no photochemical mutagenicity was observed with 1-octene in the absence of the CAS. Oxide compounds, however, showed a decreasing trend of photoalkylating activities in the presence or absence of the CAS. We found that the structure-activity relationship was not applicable to our data.

• Bulletin of the Korean Chemical Society
• /
• 제7권3호
• /
• pp.235-237
• /
• 1986

Reaction of $(E)-{\beta}-chloro-{\gamma}$-hydroxyvinylmercurials, prepared by mercuration of propargyl alcohol and 2-methyl-3-butyne-2-ol, with olefins in the presence of a catalytic amount of $Li_2PdCl_4$ and 2 equiv of cupric chloride in methanol at $50^{\circ}C$ gave the corresponding (E,E)-2,4-dienols in moderate yields. However, addition of 1 equiv of inorganic bases such as magnesium oxide to the reaction mixture brings a rapid and clean vinylation and gave high yields of the dienols at room temperature. In the case of hindered (E)-2-chloro-3-chloromercuri-2-buten-1,4-diol prepared from 2-butyne-1,4-diol, reaction with olefins gave the dienols only in low yields even in the presence of 2 equiv of magnesium oxide.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.246-250
• /
• 1987

The reaction of aryl iodides or bromides with olefins in the presence of 1 mol % of $PdCl_2(PPh_3)_2$ and 3 equiv. of $n-Bu_3N\; at\; 100^{\circ}C$ in carbon monoxide atmosphere gave the corresponding aryl vinyl ketones in good yields with small amount of vinylated 1-aryl olefins. But, when the reaction was proceeded under the 10 atm of carbon monoxide, aryl vinyl ${\alpha}$-diketones and aryl vinyl ketones were obtained in moderate to good yields. The reaction was tolerant of a wide variety of functional groups on either the aryl halides or olefin compounds. Reactivity of aryl halide decrease in the order; aryl iodide > aryl bromide ${\gg}$aryl chloride. In general, the reaction proceeded well and gave good yields of aryl vinyl ketones and aryl vinyl ${\alpha}$-diketones when reactants are substituted with electron withdrawing groups.

• 공업화학
• /
• 제25권1호
• /
• pp.34-40
• /
• 2014

메조 세공을 갖는 SAPO-34 촉매를 2차 주형 물질로서 탄소 나노튜브(CNT)를 이용한 수열 합성 방법에 의해 성공적으로 합성했으며, CNT 첨가량(0.5, 1.5, 2.5 및 4.5 mol%)이 촉매 성능에 미치는 영향을 조사하였다. 합성된 촉매들은 X-선 회절 분석(XRD), 주사 전자 현미경(SEM), 질소 흡탈착 등온선 및 암모니아 승온 탈착($NH_3$-TPD)을 통해 특성분석을 수행하였다. 합성된 촉매 중에서 1.5 mol% CNT를 첨가하여 제조된 SAPO-34 (1.5C-SAPO-34)가 가장 큰 메조 세공부피를 나타냈을 뿐만 아니라 총 산점의 양도 가장 높은 것으로 관찰되었다. 그러나 CNT의 함량을 그 이상 첨가하여 제조한 촉매들의 경우 결정의 크기가 너무 작아 오히려 메조 세공의 부피가 감소하는 것으로 나타났다. 제조된 촉매들의 dimethyl ether to olefins 반응에서 CNT 함량에 따른 촉매 수명과 경질 올레핀($C_2{\sim}C_4$)의 선택성을 연구하였다. 그 결과 1.5C-SAPO-34 촉매는 기존의 SAPO-34 촉매와 비교하여 더 우수한 경질 올레핀 선택도와 약 36%의 향상된 촉매수명을 나타났다.

• Journal of Photoscience
• /
• 제1권1호
• /
• pp.1-7
• /
• 1994

Irradiation of 1-phenyl-4-(2-pyridyl)-1,3-butadiyne (2-PPB) with dimethyl fumarate (DMFu) and 2,3-dimethyl-2-butene (DMB) yields photoadducts, 1-12. The mechanism of the photoreaction of 2-PPB with olefins is similar to that of 1,4-diphenyl-1,3-butadiyne with oiefins.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.71-83
• /
• 2001

The metallocene compounds had been applied to the polymerizations of olefins and vinyl monomers with methylaluminoxane (MAO) cocatalyst, and they have usually one transition metal atom per molecule, i.e., mononuclear metallocene. Recently it has been found that the dinuclear metallocene compounds containing two transition metal atoms exhibit the peculiar polymerization behaviors for olefins and vinyl monomers. In this article, the dinuclear metallocenes are classified into four groups of dinuclear bent-metallocene, dinuclear ansa-metallocene, dinuclear constrained geometry catalyst and dinuclear half-metallocene, and then the synthesis of dinuclear metallocene of each group as well as the polymerization behaviors for ethylene, propylene, and styrene are described.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.989-992
• /
• 2013

• 대한화학회지
• /
• 제47권3호
• /
• pp.297-300
• /
• 2003