• The Korean Journal of Ecology
• /
• v.7 no.3
• /
• pp.170-176
• /
• 1983

The results obtained from the experiments conducted to investigate Cruciferae plants in rape dependent on the amount of applied fertilizer in aspects of mineral nutrient uptake and on the effects of the composition of oil quality are as follows: Absorption of mineral nutrients in the respective pars of the plant body was high in nitorgen in the order of leaf and stem

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.815-820
• /
• 2009

Binary nanoemulsions which are defined as the, oil-droplet suspensions in binary solution ($H_2O$/LiBr), are developed to enhance the heat and mass transfer performance of absorption refrigeration systems. In this study, a novel two-step method is proposed to prepare the stable oil-in-binary solution (O/S) emulsion. Polymer is used as a steric stabilizer to stabilize the oil-droplets in a strong electrolyte ($H_2O$/LiBr). It is found that the thermal conductivity of the binary nanoemulsion is inversely proportional to the emulsion size while the concentrations of oil and $H_2O$/LiBr are less dominant for the thermal conductivity of binary nanoemulsions.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.89-90
• /
• 2003

Effects of interaction of dietary soybean oil with NaHCO$_3$on the energy metabolism and antioxidants enzyme activity in broiler chicks during acute phase response was studied, Broiler chicks 10 d-old were fed on diets containing 5.0 ％ of soybean oil with or without 0.5 ％(60 meq/kg) of NaHCO$_3$. Then acute phase response were induced by injecting Salmonella typhymurium lipopolysacharide(LPS) In saline 3 times i.p. at alternative day on 16-d of age. Dietary soybean oil with NaHCO$_3$lessened the performance(growth, feed efficiency, calcium balance, excretion of uric acid, and nitrogen balance) -suppressing effect of the LPS effect, but enhanced metabolizable energy value of diet due to increased digestive absorption of energy sources and phosphoruse balance, and decreased activities of SOD in erythrocyte cytosols and circulating ceruloplasmin in plasma. The results indicated dietary energy utilization and electrolytes levels may interact with the antioxidants systems during acute phase response.

• Elastomers and Composites
• /
• v.40 no.3
• /
• pp.196-203
• /
• 2005

In this work, the engine oil resistant evaluation and breakdown analysis of room temperature vulcanizing silicone adhesives were performed through the surface properties, thermal stabilities, adhesive strength, and morphology measurements. As a result, the permeation of engine oil into adhesive specimens was carried out from surface to center in the specimens. And the oil content in the adhesive specimens was increased and the Si-O-Si bond of the adhesives was decomposed with increasing the aging time. The TGA results indicated that the thermal degradation was mainly occurred at under and surfaces of the specimens. The tensile strength, elongation, and adhesive strength of the adhesives were significantly decreased after the engine oil resistant tests, which could be attributed to the initial lose of adhesive properties resulting from the engine oil absorption and thermal aging. And the failure mode of the adhesive specimens was changed from cohesive failure to interfacial failure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.121-130
• /
• 1986

Using the sbsorption coefficients and the weighting factors of the gray gas, the total emissivities of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures can be expressed by the following equation, [a numerical formula] Where, $a_{i}$ and $K_{i}$ represent the weighting factor and the absorption coeffient of i-gray gas respectively; L is the pathlength of the gas. This equation is widely used for the analyses of the radiation heat transfer in the combustors of internal combustion engines and in the furnace of external combustion engines. In this work, a simple calculation model of the weighting factor and the absorption coeffient of the above equation was developed. The weighting factors and the absorption coefficients of combustion products were calculated by applying the model to various kinds of fossil fuels such as coal and heavy oil. Then, the computed total emissivities for each fuel and pathlength were compared with measured and calculated values which have been already published in the literatures. The followings were the results obtained through the comparisons between the calculated emissivites and the published values; the developed model for the calculations of the weighting factor and the absorption coefficient of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures could be applied over the wide ranges of the temperature and the pathlength; the errors between the total emissivities calculted and the values published were maximum 10%, and average 1%, respectively.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.117-120
• /
• 2008

As we can see at the oil spill occident on the coast of Taean, the viscosity of the spilled oil becomes thicker as time goes by. It becomes waste oil with the form of tar. It moves to other areas following a tide. When the temperature of the water goes up, the viscosity becomes lighter and forms oil film. It repeats the process spreading to and polluting extensive areas where the tide reaches. People have used hand nets to collect waste oil of tar at the sea. But it is very difficult for them to collect the tar type waste oil spread on large areas before it reaches to the beach. This paper tried to find a way to collect the tar type waste oil efficiently. It used absorption mat of boom type that uses the attachment characteristics of the tar type waste oil and floating waste recovery device of net type. It tested the possibility of using the devices at the oil spill accident on the beach of Taean. The result showed that net type recovery device was much more efficient in collecting the waste oil in short time than the hand net system of people. It confirmed that the net type recovery device could be used to collect tar type waste oil.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.297-302
• /
• 2022

An exothermic oil absorbent sheet with calcium chloride crystals can be fabricated, by dipping a clean polypropylene fabric in calcium carbonate and hydrochloric acid solution and drying it. The exothermic oil absorbent sheet applied to the seawater surface, releases heat by the dissociation of calcium chloride. The dissociation heat liquefies the solidified low-sulfur fuel oil at a low temperature, and converts it to a state at which it can be absorbed. The optimum mole concentrations of calcium carbonate and hydrochloric acid required for the exothermic oil absorbent sheet, are 0.25 M and 0.5 M, respectively. The oil absorption capacity of the exothermic oil absorbent sheet for low sulfur fuel oil depends on the seawater temperature. But, it is highly excellent at 4.5-7.08 g/g at 10℃, the average seawater temperature during the winter in Korea. The exothermic oil absorbent sheet is an excellent alternative in absorbing low-sulfur fuel oil in winter and removing it from seawater.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.749-753
• /
• 2004

Effects of olive oil on rheological properties of wheat flour dough were investigated through farinograph, amylograph, and extensograph, and by measuring wheat flour dough fermentation volume. Farinogram showed development time, stability, elasticity, and valorimeter value of olive oil-added wheat flour decreased, whereas water absorption and stability were similar to control (shortening 4%). Gelatinization temperature and maximum viscosity of wheat flour dough with olive oil decreased more than those of control as revealed by amylogram. Extensogram showed wheat flour area increased, whereas dough volume decreased in olive oil-added wheat flour dough.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.91-97
• /
• 1987

Because of its more complete hydrolysis and rapid absorption, MCT is expected its usefulness in the diets of patients with malabsorption syndrom. Also, several authors reported that serum cholesterol level was lower after MCT feedings. In this study, rate of each experimental group were fed for 4weeks with 20％ MCT, 20％ corn oil, mixed diet of 10％ MCT and 10％ corn oil, mixed diet of 17％ corn oil and 3％ shortening. After experimental diet, it was measured to growth rate and serum cholesterol, triglyceride and phospholipid level. The results were as follows; 1. The body weight gain was the lowest in MCT group and others were lower than control group. 2. Serum total cholesterol level was the lowest in corn oil group and others were significantly lower than control group. Free cholesterol level was lower in all experimental groups than control group too. 3. Serum HDL-cholesterol level was significantly higher in all experimental groups than control group. 4. The ratio of VLDL, LDL-Cholesterol to HDL-Cholesterol was significantly lower in all experimental groups than control group. 5. Serum triglyceride level was higher in all experimental groups than control group. Serum phospholipid level was significantly in only mixed diet group of corn oil and shortening than control group. 6. The ratio of total cholesterol to phospholipid was significantly lower in corn oil diet group than control group.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.50-57
• /
• 2004

This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fungi was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi (Tyromyces palustris) and brown rot fungi (Trametes versicolor) showed that the treated sample has a decay resistance to these two fungi.