• 대한조선학회지
• /
• 제26권3호
• /
• pp.51-61
• /
• 1989

최근(最近)의 배는 에너지 절약(節約)을 도모하기 위하여 프로펠러 회전수(回轉數)의 저속화(低速化)와 더불어 대형화(大型化)되고 있다. 이와 같은 결과(結果)로 선미관(船尾管)의 후부(後部) 베어링에는 집중하중(集中荷重)이 작용(作用)하게 되어 선박(船舶)의 운항능력(運航能力)을 상실할 정도의 대형사고(大型事故)가 일어나고 있는 예(例)가 많다. 이와 관련하여 최근(最近) 유막(油膜)을 고려한 선미관(船尾管) 베어링 해석(解析)에 관(關)한 연구(硏究)가 활발하게 이루워지고 있다. 본(本) 연구(硏究)에서는 지금까지 연구발표(硏究發表)된 유막(油膜)을 고려한 선미관(船尾管) 베어링에 대한 축(軸)의 위치(位置)를 추정(推定)하는 방법(方法)을 수정보완(修正補完)한 새로운 방법(方法)을 제시(提示)하였다. 즉 축계(軸系)에 대해서는 유한요소법(有限要素法)에 의한 삼차원(三次元) 구조해석방법(構造解析方法), 베어링 유막(油膜)은 유한요소법(有限要素法)에 의한 이차원(二次元) 유체역학해석방법(流體力學解析方法), 그리고 축계(軸系)와 베어링 유막간(油膜間)의 준정적(準靜的) 평형점(平衡點)을 구하기 위해서는 최적화(最適化) 기법(技法)이 사용된다. 본(本) 해석방법(解析方法)의 타당성(妥當性) 여부(與否)를 확인(確認)하기 위하여 Vorus 등이 사용(使用)한 시산대상선(試算對象船)에 대한 일련의 수치계산(數値計算)을 수행하고 동(同) 결과(結果)를 Vorus등의 연구 결과와 비교검토(比較檢討)하여 본 결과(結果), 비교적(比較的) 잘 일치(一致)하고 있음을 미루어 보아 본(本) 해석방법(解析方法)의 타당성(妥當性)이 확인(確認)되었다.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.245-250
• /
• 2015

This study investigates the lubrication characteristics of fuel injection pumps with reference to different fuel oils. Medium-speed diesel engines use fuel oils with various viscosities, such as heavy fuel oil (HFO, which is a high-viscosity fuel oil) and light diesel oil (LDO, which is a low-viscosity fuel oil). When fuel oil with a low viscosity is used, both fuel oil and lubricating oil lubricate the system. Thus, the lubrication of the fuel injection pump is in a multi-viscosity condition when the fuel oil in use changes. We suggest three cases of multi-viscosity models, and divide the fuel injection pump into three lubrication sections: a, the new oil section; b, the mixed oil section; and c, the used oil section. This study compares the lubrication characteristics with variation of the multi-viscosity model, clearance. The volume of Section b does not affect the lubrication characteristics. The lubrication characteristics of the fuel injection pump are poor when high-viscosity fuel oil transfers to low-viscosity fuel oil. This occurs because the viscosity in the new oil section (i.e., Section a) dominates the lubrication characteristics of the fuel injection pump. However, the lubricant oil supply in the used oil section (i.e., Section c) can improve the lubrication characteristics in this condition. Moreover, the clearances of the stem and head significantly influence the lubrication characteristics when the fuel oil changes.

• Tribology and Lubricants
• /
• 제2권2호
• /
• pp.27-31
• /
• 1986

By Bong Goo Rhee, College of Engineering, The Univ. of Won Kwang (344-2, Sinyongdong, Iri-shi, 510 Chunpuk-do, Korea), Yoshitsugu Kimura and Kazumi Okada, Institute of Interdisciplinary Research, Faculty of Engineering, The Univ. of Tokyo(4-6-1 Komaba, Meguro-ku, Tokyo 153, Japan), Katsuyuki Hashizume, Taiho Kogyo(2-47 Hosoya-Cho, Toyoda-Shi 471, Japan) and Chang Heon Chi, The G. S of Chon buk N. Unv. It is empirically known that, in concentrated conjunctions lubricated with O/W emulsions, only the oil is entrained to form elastohydrodynamic films. In the present work, this phenomenon is studied experimentally and the result is compared with a theory Which employes a starved lubrication concept. The experiment is conducted in a four roller machine with 0/W emulsions of varying concentration of oil, i.e. beef tallow, in which the film thickness is determined by detecting the rate of X-ray transmission through the conjunction. Excellent agreement is found between the experimental and the theoretical results.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.16-26
• /
• 1997

In this paper, the characteristics of lubrication and wear phenomena of journal bearing with respect to film parameter and Sommerfeld number variation are investigated experimentally and the design criterion for the hydrodynamic journal bearing is presented to avoid wear and seizure. Experimental work is performed with various rotating speed and load, and lubricant is used synthetic oil and mineral oil. By the results of the experiment, it is found that friction coefficient is decreased as Sommerfeld number is decreased, and that wear phenomenon is observed when Sommerfeld number is below $9$\times$10^{-4}$ and there are much alike in wear properties between synthetic and mineral oil.

• Tribology and Lubricants
• /
• 제18권5호
• /
• pp.357-363
• /
• 2002

The vibration characteristics of the pad fluttering in a fluid film tilting pad journal bearing (4-pad LBP) have been investigated experimentally under the different values of oil supply flow rate, bearing load and shaft speed. The vibration characteristics of the pad fluttering are estimated by measuring the time signal of circumferential distribution of the film thickness and the cascade plot of the response of the relative displacement between the bearing and the shaft. It is shown that the vibration frequency of the pad fluttering has a sub-synchronous frequency and almost does not change by the increase of shaft speed. However the vibration amplitude is increased by the increase of shaft speed. From those experimental results, pad fluttering can be thought of as a self-excited vibration. The incipient pad fluttering velocity is increased by the increase of oil supply flow rate and by the decrease of bearing load. It is observed that the vibration amplitude of the pad fluttering can be decrease by the control of supply oil flow rate effectively. And also It is known that the outbreak of pad fluttering does not concern with the shaft vibration.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.228-234
• /
• 2000

The vibration characteristics of the pad fluttering in a fluid film tilting pad journal bearing(4-pad LBP) have been investigated experimentally under the different values of oil supply flow rate, bearing load and shaft speed. The vibration characteristics of the pad fluttering are estimated by measuring the time signal of circumferential distribution of the film thickness and the cascade plot of the response of the relative displacement between the bearing and the shaft. It is shown that the vibration frequency of the pad fluttering has a sub-synchronous frequency and 31mos1 does not change by the increase of shaft speed. However the vibration amplitude is increased by the increase of shaft speed. From those experimental results, pad fluttering can be thought of as a self-excited vibration. The incipient pad fluttering velocity is increased by the increase of oil supply rate and by the decrease of bearing load. It is observed that the vibration amplitude of the pad fluttering can be decreased by the control of supply oil flow rate effectively. And also It is known that the outbreak of pad fluttering does not concern with the shaft vibration.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.84-90
• /
• 2004

It is very important to improve the durability and reliability of crankshaft because of conflicting demands for lower fuel consumption and higher power output. In this study, for the crankshaft bearing design, analyses were conducted to determine the lubrication characteristics such as oil flow rate, minimum oil film thickness, friction force and increase of oil temperature at main bearing and connecting rod bearing. Additionally, supplied oil pressure and temperature effects on the bearings were simulated to figure out lubrication characteristics on the bearings. Finally the effects of increasing the bearing width and clearance were introduced on the lubrication characteristics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.201-211
• /
• 2001

The influence of aerated oil on high-speed journal bearing is examined by classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of aerated oil in fluid-film bearing. Convection to the walls, mixing with supply oil and re-circulating oil, and some degree of journal misalignment are considered. The considered Parameters for the study of bubbly lubrication are oil aeration level, air bubble size, shaft misalignment and shaft speed. The results show that deliberate oil aeration can more clearly bring on the increasing load capacity under high-speed operation of plain journal hearing than previous normal speed operation. And the load capacity may be increased more by oil aeration under the conditions of shaft misalignment and the increasing speed.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.133-145
• /
• 2017

Palm oil production is among the highest worldwide, and it has been mainly used in the food industry and other commodities. Currently, a lot of palm oil production has been destined for the synthesis of biodiesel; however, its use in applications other than the food industry has been questioned. Thereby for a sustainable development, in this paper the use of palm oil of low quality for corrosion inhibitors synthesis is proposed. The performance of the synthesized inhibitors was evaluated by using electrochemical techniques such as open circuit potential measurements, linear polarization resistance and electrochemical impedance spectroscopy. The results indicate that the fatty amides from palm oil are excellent corrosion inhibitors with protection efficiencies greater than 98%. Fatty amides molecules act as cathodic inhibitors decreasing the anodic dissolution of iron. When fatty amides are added, a rapid decrease in the corrosion rate occurs due to the rapid formation of a molecular film onto carbon steel surface. During the adsorption process of the inhibitor a self-organization of the hydrocarbon chains takes place forming a tightly packed hydrophobic film. These results demonstrate that the use of palm oil for the production of green inhibitors promises to be an excellent alternative for a sustainable use of the palm oil production.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.41-53
• /
• 2011

For manufacturing the tape for repairing archival documents, we tested ten carrier candidates for selecting best material. The tensile strength, transmissivity, stability of deterioration, and processability were determined. Physical-chemical characteristics and stability of deterioration was best to the Hanji. Tensile strength and transmissivity was best in tracing paper, but was low in oil paper, white sketch paper, lyon coat paper. Synthetic carrier to tensile strength showed higher than paper carrier and to the transmissivity showed 2-8 times higher than paper carriers. The tracing paper to the transmissivity was 10 times higher than others. To determine characteristic of conservation to the selected carriers, stability of deterioration was examined at conditions of $90^{\circ}C$ for 15 days. Oil paper and white sketch paper turned strongly yellowish. Cellulopane, Felt, and Cpp film showed stable stability of deterioration, but deformation like wrinkles. PET film and Syntheletic film showed excellent conservation characteristics without any change of exterior. Test of adhesive uniform between carriers and adhesive processability was performed. PET film > Syntheletic film > Tracing Paper in order were determined. Ununiformal adhesive characteristics appeared to Hangi. Accordingly, we thought that Hanji as carrier material might be unsuitable because of low adhesive processability.