• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1121-1126
• /
• 2009

This paper describes a pattern recognition method of Magnoliae flos based on a gas chromatographic/mass spectrometric (GC/MS) analysis of the essential oil components. The botanical drug is mainly comprised of the four magnolia species (M. denudata, M. biondii, M. kobus, and M. liliflora) in Korea, although some other species are also being dealt with the drug. The GC/MS separation of the volatile components, which was extracted by the simultaneous distillation and extraction (SDE), was performed on a carbowax column (supelcowax 10; 30 m{\time}0.25 mm{\time}0.25{\mu}m$) using temperature programming. Variance in the retention times for all peaks of interests was within RSD 2% for repeated analyses (n = 9). Of the 74 essential oil components identified from the magnolia species, approximately 10 major components, which is $\alpha$-pinene, $\beta$-pinene, sabinene, myrcene, d-limonene, eucarlyptol (1,8-cineol), $\gamma$-terpinene, p-cymene, linalool, $\alpha$-terpineol, were commonly present in the four species. For statistical analysis, the original dataset was reduced to the 13 variables by Fisher criterion and factor analysis (FA). The essential oil patterns were processed by means of the multivariate statistical analysis including hierarchical cluster analysis (HCA), principal component analysis (PCA) and discriminant analysis (DA). All samples were divided into four groups with three principal components by PCA and according to the plant origins by HCA. Thirty-three samples (23 training sets and 10 test samples to be assessed) were correctly classified into the four groups predicted by PCA. This method would provide a practical strategy for assessing the authenticity or quality of the well-known herbal drug, Magnoliae flos.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1435-1450
• /
• 2004

Experimental data are presented which describe the effects of a combustor-level high free-stream turbulence on the near-wall flow structure and heat/mass transfer on the endwall of a linear high-turning turbine rotor cascade. The end wall flow structure is visualized by employing the partial- and total-coverage oil-film technique, and heat/mass transfer rate is measured by the naphthalene sublimation method. A turbulence generator is designed to provide a highly-turbulent flow which has free-stream turbulence intensity and integral length scale of 14.7% and 80mm, respectively, at the cascade entrance. The surface flow visualizations show that the high free-stream turbulence has little effect on the attachment line, but alters the separation line noticeably. Under high free-stream turbulence, the incoming near-wall flow upstream of the adjacent separation lines collides more obliquely with the suction surface. A weaker lift-up force arising from this more oblique collision results in the narrower suction-side corner vortex area in the high turbulence case. The high free-stream turbulence enhances the heat/mass transfer in the central area of the turbine passage, but only a slight augmentation is found in the end wall regions adjacent to the leading and trailing edges. Therefore, the high free-stream turbulence makes the end wall heat load more uniform. It is also observed that the heat/mass transfers along the locus of the pressure-side leg of the leading-edge horseshoe vortex and along the suction-side corner are influenced most strongly by the high free-stream turbulence. In this study, the end wall surface is classified into seven different regions based on the local heat/mass transfer distribution, and the effects of the high free-stream turbulence on the local heat/mass transfer in each region are discussed in detail.

• 공업화학
• /
• 제3권2호
• /
• pp.349-359
• /
• 1992

염료속에 함유된 무기염(NaCl, $Na_2SO_4$)의 선택적 제거를 위해 역확산과 역삼투를 결합한 방법과 nanofiltration(NF)을 각각 이용하였다. 역확산에 의한 염의 제거율은 염의 종류에 따라 1회(one pass)에 1~30%를 나타냈으며 염과 염료의 분리비는 10~500의 매우 큰 값을 갖는 반면 염료의 손실율은 0.3% 이하였다. 염료용액을 순환시킬수록 음이온인 $Cl^-$ 이온의 제거율이 증가하고 양이온인 $Na^+$ 이온의 제거율이 감소하는 도난투석현상이 관찰되었다. 또한 공급용액의 유속이 염의 제거에 미치는 영향을 살펴보았다. 역확산에 의해 염이 제거된 염료를 평판형 역삼투막을 사용하여 농축하였으며 $Cl^-$ 이온의 배제율을 solution-diffusion 모델식에 적용하였다 2회의 Diafiltration(DF)을 수행한 NF에서도 역확산에서와 마찬가지로 도난투석에 의해 $Cl^-$ 이온의 배제율 감소와 음배제율을 관찰하였다. 특히 두번째 DF에서 도난투석의 효과는 더욱 크게 나타났다.

• 청정기술
• /
• 제13권1호
• /
• pp.72-78
• /
• 2007

석유 잔사유(PGO)에 포함된 유효성분을 분리하기 위한 기초 연구로 컬럼 및 봉형 용융 결정화기를 사용하여 나프탈렌에 불순물로 2-메틸나프탈렌, 인덴, 1-메틸나프탈렌을 각각 포함시킨 혼합물에 관한 분리정제 연구를 수행하였다. 결정화시, 나프탈렌의 순도는 냉각속도가 낮거나, 융점이 상대적으로 낮은 불순물이 포함될 수 록 증가하는 경향을 나타내었으며, 동일한 조건에서 컬럼형 결정화기의 순도는 봉형에 비해 결정화후 부분용융에서 순도의 증가에 기인하여 높은 경향을 나타내었다.

• 대한기계학회논문집B
• /
• 제41권8호
• /
• pp.521-529
• /
• 2017

본 연구에서는 항공기 추진용 가스터빈 엔진의 고증속 터빈 제1단 정익 익렬을 새로이 구축하고, 이 정익의 기본 유동 특성에 대하여 연구하였다. 그 결과 본 연구에서 도입된 정익의 압력면에는 강한 순압력구배가 존재하는 반면, 흡입면에는 앞전에서 미드코드 근처까지 압력면보다 훨씬 더 심한 순압력구배가 존재하고 그 이후 역압력구배가 존재하였다. 두 종류의 유막법을 적용한 유동의 가시화 실험을 통하여, 정익 앞전 상류 영역에 4와류모델 말발굽와류 시스템이 존재함을 확인하였고, 입구 경계층 유동의 박리선과 재부착 유동의 박리선을 정확히 파악하였다. 이와 함께 이 고증속 정익 익렬 하류에서의 2차유동, 압력손실, 선회각, 등에 대한 데이터를 확보하였다.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1252-1257
• /
• 2013

본 연구는 Homomixer의 회전속도에 따른 염화마그네슘 유화물의 제조특성을 비교하여 두부응고제로서 염화마그네슘유화물의 제조상 최적조건을 확립하기로 하였다. 염화마그네슘유화물의 입자는 Homomixer의 회전속도가 증가할수록 미세화 되었다. 입자크기는 $1{\sim}5{\mu}m$로 분포하고 있었다. 분산상의 입자크기가 미세화 할수록 점도의 증가와 보관 중 유상분리의 지연으로 상관관계가 있음을 나타내었다. 따라서 염화마그네슘유화물을 제조하는데 있어서 Homomixer의 회전속도는 10,000rpm 이상에서 제조하는 것이 두부응고제로서 두부의 조직 상태와 이수율 등이 가장 좋은 결과를 나타내었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.861-882
• /
• 2000

The seed, or grain, of modern cultivars of Lupinus angustifolius, commonly known as Australian sweet lupins (ASL), is an established feed resource for the intensive animal industries of Australia, Japan, Korea and several other countries in Asia and Europe. Since the introduction of ASL to the world marketplace about 25 years ago, researchers in many countries have found them to be a valuable component of the diet of beef and dairy cattle, sheep, pigs, poultry, finfish and crustaceans. The seed of ASL contains ~32% crude protein (CP) (~35% DM basis) and 5% oil. The main storage carbohydrates in the seed are the ${\beta}$-galactans that comprise most of the cell-wall material of the kernel and the cellulose and hemicellulose of the thick seed coats. ASL seeds contain about 40% non-starch polysaccharides (NSP) and a negligible amount of starch. This makes them an excellent ingredient for ruminant diets, as the risk of acidosis is very low. The seed of modern cultivars of domesticated Lupinus species contain negligible amounts of lectins and trypsin inhibitors so they do not require preheating before being used as an ingredient in feeds for monogastric species. They have a high digestibility coefficient for protein, >90% for most species, but a low energy digestibility, ~60%, which is mostly due to the high content of NSP. The low content of methionine (0.22%) and of lysine (1.46%) is typical of the legumes. The lysine availability for pigs is >70%. Lupin kernels contain ~39% CP (~42% DM basis), 6% oil and 30% NSP. They have a higher digestible energy for pigs and finfish and a higher metabolisable energy for poultry than whole seed. Commercial operations rarely achieve complete separation of kernel from hull and it is more likely that the kernel fraction, called splits or meats, will contain ~36% CP. The replacement of soybean meal or peas with ASL in cereal-based diets for most intensively reared animals, birds and fish is possible provided lysine, methionine and digestible energy levels are kept constant. This makes ASL economically competitive in many, but not all, circumstances.

• 한국약용작물학회지
• /
• 제27권6호
• /
• pp.427-435
• /
• 2019

Background: A growing interest in health has increased the need for the development of potent antioxidant materials known to play a role in various physiological activities. Currently research and development of non-toxic natural antioxidants with high activity is ongoing. Methods and Results: In this study, we measured 2,2'-azinobis- (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging ability of 10 plant essential oils, selecting samples of Dendranthema indicum, Dendranthema zawadskii, and Citrus sunki essential oils. The samples were analyzed using liquid chromatography (LC) and the radical scavenging activity on LC-based systems with the same conditions. In the LC-mass spectroscopy (MS)/MS analysis of the active compound peak, 2-methoxy-4-vinylphenol with a molecular weight of 150.1 g/mol was identified in C. sunki essential oils. Eugenol or isoeugenol with a molecular weight of 164.1 g/mol as identified in D. indicum and D. zawadskii essential oils as radical scavenging active compounds. Conclusions: In the LC-based measurement system, the active ingredient can be identified by simultaneously conducting profile analysis and the radical scavenging activity of essential oil samples. In addition, LC-MS/MS analysis of the active compound peaks can be performed under the same separation conditions to obtain data that can identify the active compounds in the sample.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.51-57
• /
• 2010

실리콘 웨이퍼공정에서 발생하는 실리콘 슬러지로부터 리싸이클링 공정으로 Si-SiC 혼합물을 분리 회수한 다음 기계적 합성법으로 Si-SiC-CuO-C 복합물을 제조하였으며, 리튬전지 음극물질로서의 가능성을 조사하였다. 실리콘 슬러지의 주요 불순물은 절삭유, 금속불순물 및 SiC를 들 수 있다. 오일세정-자력선별-산세척으로 절삭유와 금속불순물을 제거한 다음 고에너지 밀링법으로 Si-SiC-CuO-C 복합물을 합성하였다. 복합물의 충방전 용량과 사이클 특성을 조사한 결과, 수명에 따른 용량 유지 특성이 향상된 우수한 결과를 얻을 수 있었다. 복합물을 구성하는 SiC와 CuO 관련 물질은 실리콘의 부피팽창으로 인한 기계적 파괴 현상을 억제하는 요소로 작용하는 것으로 추정되며, 반면에 Fe 등과 같은 불순물은 전극의 충방전 용량을 감소시키는 요인으로서 전극물질 합성 전에 10 ppm 이내로 제거되어야 하는 것으로 판단된다.